Journal of Mechanical Engineering

1994, Volume 30 Issue 增刊 Publication:01 December 1944
Previous Issue Next Issue
Article
THEORETICAL ANALYSIS OF THE DYNAMIC STRESSES IN HAMMER ROD
Li Fuguo;Huang Luquan
. 1994, 30 (增刊): 1-8.
Abstract ( 150 )    PDF(0KB) ( 93 )
Related Articles | Metrics
STUDY ON THE TRANSVERSE DISTRIBUTIONS OF THE PRESSURE, FRICTIONS AND TENSIONS OF COLD STRIP ROLLING UNDER LARGE WIDTH TO THICKNESS RATIO
Liu Hongmin;Bian Yuhong;Lian Jiachuang
. 1994, 30 (增刊): 9-14.
Abstract ( 318 )    PDF(0KB) ( 202 )
Related Articles | Metrics
RESEARCH OF LOW NOISE FLUID POWER TRANSMSION AND CONTROL SYSTEMS
Gao Zhiheng;Yang Junxing;Tang Xing;Qu Zhixin;Gao Xiangyu
. 1994, 30 (增刊): 15-20.
Abstract ( 186 )    PDF(0KB) ( 125 )
Related Articles | Metrics
UNIVERSAL METHOD ANALYSING THE LARGE DEFLECTION BUCKLING DEFORMATION OF ROLLED STRIP
Bian Yuhong;Liu Hongmin
. 1994, 30 (增刊): 21-27.
Abstract ( 282 )    PDF(0KB) ( 124 )
Related Articles | Metrics
DYNAMIC ANALYSIS OF THE PILOT CHECK VALVE USED IN HYDRAULIC HAMMER
Jiang Weilin;Fu Wenzhi;Zhang Tianpeng;Jin Wenming;He Dongye
. 1994, 30 (增刊): 28-32.
Abstract ( 147 )    PDF(0KB) ( 107 )
Related Articles | Metrics
STUDY ON THE COMBINED GAUGE AND SHAPE CONTROL CHARACTER OF DC MILL
Liu Yuli;Lian Jiachuang;Duan Zhenyong
. 1994, 30 (增刊): 33-39.
Abstract ( 165 )    PDF(0KB) ( 101 )
Related Articles | Metrics
SIMULATION OF ROLLING PROCESSES BY THE BOUNDARY ELEMENT METHOD OF ELASTOPLASTIC FINITE DEFORMATION PROBLEMS
Xiao Hong;Shen Guangxian;Lian Jiachuang
. 1994, 30 (增刊): 40-45.
Abstract ( 200 )    PDF(0KB) ( 195 )
Related Articles | Metrics
PRESSURE-VISCOSITY CHARACTERISTICS OF 20 CHINESE LUBRICANTS
Xu Hanping;Zhao Yuan;Lei Tianjue;Wang Chaoran
. 1994, 30 (增刊): 46-53.
Abstract ( 339 )    PDF(0KB) ( 207 )
Related Articles | Metrics
PREDICTION OF FATIGUE CRACK GROWTH RATES IN 16Mn STEEL AT LOW TEMPERATURE
Lu Baotong;Li Tao;Zheng Xiulin
. 1994, 30 (增刊): 54-59.
Abstract ( 226 )    PDF(0KB) ( 132 )
Related Articles | Metrics
USE OF NEURAL NETWORK IN THE CONDITION MONITORING AND FAULT DIAGNOSIS OF LARGE ROTATING MACHINERY
Tong Dechun;Dai Jinsong
. 1994, 30 (增刊): 60-66.
Abstract ( 277 )    PDF(0KB) ( 250 )
Related Articles | Metrics
METHOD FOR COMPUTING STRUCTURAL FATIGUE LIFE RELIABILITY
Lu Zhenzhou;Feng Yuanshen
. 1994, 30 (增刊): 67-72.
Abstract ( 338 )    PDF(0KB) ( 134 )
Related Articles | Metrics
STRUCTURE SPHEROIDAL GRAPHITE IN CAST IRONS
Liu Qifu
. 1994, 30 (增刊): 73-78.
Abstract ( 176 )    PDF(0KB) ( 115 )
Related Articles | Metrics
SIMULATION OF TEMPERATURE AND STRESS FIELDS OF ZX10.7t INGOT MOLD MADE FROM DUCTILE IRON IN SERVICE
Sheng Da;Jia Zhijie;Li Youdao;Liu Jincheng
. 1994, 30 (增刊): 79-85.
Abstract ( 194 )    PDF(0KB) ( 95 )
Related Articles | Metrics
INTERFACIAL FRICTION BEHAVIOUR AN STRESS ANALYSIS OF CROSS-HELICALLY COILED HIGH PRESSURE VESSEL
Zheng Jinyang;Huang Zaisheng;Zhu Guohui
. 1994, 30 (增刊): 86-93.
Abstract ( 144 )    PDF(0KB) ( 233 )
Related Articles | Metrics
EXPERIMENTAL STUDIES OF LOWER ORDER RESONANCE PHENOMENON OF ELASTIC LINKAGES AND ITS EXPLANATION
Wang Yuxin;Zhang Ce;Lu Xinian
. 1994, 30 (增刊): 94-99.
Abstract ( 166 )    PDF(0KB) ( 112 )
Related Articles | Metrics
CONTROL OF THE CONSTANT PHASE DIFFERENCE BETWEEN THE CURRENT AND THE DISPLACEMENT OF THE MAGNETIC DAMPER IN THE ROTOR-BEARING SYSTEM
Tong Shuiguang;Wang Xixuan
. 1994, 30 (增刊): 100-108.
Abstract ( 201 )    PDF(0KB) ( 140 )
Related Articles | Metrics
COMPUTER SIMULATION AND COMPREHENSIVE MESHING STIFFNESS ON TOOTH FORMS OF SHAVED GEARS
Wang Guoxing;Xiong Huanguo;Li Gaojing
. 1994, 30 (增刊): 109-114.
Abstract ( 200 )    PDF(0KB) ( 113 )
Related Articles | Metrics
DIAGNOSIS OF LARGE ROTATING MACHINERY VIA ARTIFICIAL NEURAL NETWORK
Chen Yuedong;Qu Liangsheng
. 1994, 30 (增刊): 115-120.
Abstract ( 187 )    PDF(0KB) ( 148 )
Related Articles | Metrics
STUDY ON THE ELASTODYNAMICS OF ROBOTS FABRICATED FROM COMPOSITE MATERIALS
Wang Gang;Huang Shicong;Peng Shangxian;Lu Xiaofan
. 1994, 30 (增刊): 121-127.
Abstract ( 179 )    PDF(0KB) ( 221 )
Related Articles | Metrics
VIBRATION ANALYSIS OF FLEXSPLINE UNDER A SMALL DEFORMATION USING FINITE ELEMENT METHOD
Li Shuting;Shen Yunwen;Lin Tiancun;He Dawei;Liu Geng
. 1994, 30 (增刊): 128-133.
Abstract ( 235 )    PDF(0KB) ( 85 )
Related Articles | Metrics
DYNAMIC ANALYSIS OF ELASTIC PLANAR LINKAGES WITH CLEARANCES
Li Zhe
. 1994, 30 (增刊): 134-139.
Abstract ( 163 )    PDF(0KB) ( 142 )
Related Articles | Metrics
RESEARCH ON STRAIN GAUGE TYPE CUTTING DYNAMOMETER——A NEW PRINCIPLE OF STRUCTURE DESIGN
Jin Wenlin;Zhang Youzhen
. 1994, 30 (增刊): 140-146.
Abstract ( 255 )    PDF(0KB) ( 161 )
Related Articles | Metrics
NUMERICAL ANALYSIS ON GEOMETRY OF SHAVING AND DEFLECTION OF SHAVING CUTTER
Wang Guoxing;Xiong Huanguo;Li Gaojing
. 1994, 30 (增刊): 147-153.
Abstract ( 160 )    PDF(0KB) ( 240 )
Related Articles | Metrics
INVERSE EIGENVALUE PROBLEM FOR OPTIMAL SECTIONAL PARAMETERS DESIGN OF ELASTIC MECHANISMS
Liu Hongzhao;Zhang Xianmin;Cao Weiqing
. 1994, 30 (增刊): 154-161.
Abstract ( 187 )    PDF(0KB) ( 97 )
Related Articles | Metrics
RESEARCH OF SPIRAL BEVEL GEAR WITH NEW SYSTEM AND LOW SOUND
Deng Xiaozhong;Liang Guiming
. 1994, 30 (增刊): 162-166.
Abstract ( 159 )    PDF(0KB) ( 252 )
Related Articles | Metrics
APPROACH TO THE ANALYSIS ON THE ERROR PROMINENCY OF ROBOTS
Zhou Xuecai;Zhang Qixian
. 1994, 30 (增刊): 167-175.
Abstract ( 227 )    PDF(0KB) ( 99 )
Related Articles | Metrics
RESEARCH ON THE DIAGONAL MODIFICATION METHOD OF NARROW HELICAL GEARS AND ITS NOISE REDUCTION EFFECTS
Wang Xianfa;Li Huamin
. 1994, 30 (增刊): 176-182.
Abstract ( 235 )    PDF(0KB) ( 113 )
Related Articles | Metrics
STUDY ON THE FORM OF THE TOOTH SURFACE OF CROWNED GEAR ON CONJUGATE HOBBING CLUTCH
Peng Fuhua;Peng Shuzhi
. 1994, 30 (增刊): 183-190.
Abstract ( 194 )    PDF(0KB) ( 109 )
Related Articles | Metrics
CHARACTERISTICS OF MAGNETISM LEAKAGE COVERING MAGNEFIC SECTION OF STEEL PIPE SEAM AND ITS TEST
Yang Kechong;Zheng Jun;Kang Yihua;Yang Shuzi;Xie Yuan
. 1994, 30 (增刊): 191-197.
Abstract ( 151 )    PDF(0KB) ( 194 )
Related Articles | Metrics
COMPUTER AIDED DESIGN OF THE CROSS FLOW FAN
Jia Canchun;Zhu Yongning
. 1994, 30 (增刊): 198-204.
Abstract ( 168 )    PDF(0KB) ( 141 )
Related Articles | Metrics
TIME-OPTIMAL CONTORLLER FOR THE AXIS DRIFT IN A PRECSTION BORING BAR WITH DOUBLE GUIDE HYDROSTATIC BEARINGS
Pan Zhongmin;Liu Binyun
. 1994, 30 (增刊): 205-211.
Abstract ( 186 )    PDF(0KB) ( 169 )
Related Articles | Metrics
SIMULATION STUDY ON THE DYNAMIC BEHAVIOUR OF GEARS
Wang Yong;Tian Zhiren
. 1994, 30 (增刊): 212-217.
Abstract ( 209 )    PDF(0KB) ( 189 )
Related Articles | Metrics
ANALYSIS OF PRECISION FORGING OF SPUR GEAR
Wang Hongyi;Wu Ziming;Dai Peiyi
. 1994, 30 (增刊): 218-224.
Abstract ( 201 )    PDF(0KB) ( 96 )
Related Articles | Metrics
NUMERICAL ANALYSIS FOR NONSTEADY PEHL PROCESS OF ENGINE CAM-TAPPET PAIR
Mei Xuesong;Xie Youbai
. 1994, 30 (增刊): 225-231.
Abstract ( 175 )    PDF(0KB) ( 101 )
Related Articles | Metrics
EARLY FAILURE OF DIGGER AND DYNAMIC FRACTURE CHARACTERISTICS OF THE STEEL FOR HEAVY EXCAVATOR
Tang Guoyi;Su Yi;Chen Zhuohao;Liu Yadi;Fan Hua;Li Shaohua;Cai Qigong
. 1994, 30 (增刊): 232-238.
Abstract ( 158 )    PDF(0KB) ( 143 )
Related Articles | Metrics