ANALYSIS OF CONTACT LINES ON THE PRIMEVAL TOOL FOR THE FINGER CONE TWICE GENERATED HOURGLASS WORM

›› 1998, Vol. 34 ›› Issue (5): 29-33.

• Article • Previous Articles Next Articles

ANALYSIS OF CONTACT LINES ON THE PRIMEVAL TOOL FOR THE FINGER CONE TWICE GENERATED HOURGLASS WORM

Hou Li;Yin Guofu;Zhang Guanghui

Sichuan Union University Chongqing University

Published:1998-09-01

Abstract

CLC Number:

TH132

Hou Li;Yin Guofu;Zhang Guanghui. ANALYSIS OF CONTACT LINES ON THE PRIMEVAL TOOL FOR THE FINGER CONE TWICE GENERATED HOURGLASS WORM[J]. , 1998, 34(5): 29-33.

[1]	DU Yanbin, WANG Aoting, HE Kun. Tooth Contact Analysis of Helical Gears with Longitudinal Modification Considering Twist Errors [J]. Journal of Mechanical Engineering, 2024, 60(3): 143-154.
[2]	WANG Qin, HE Di, GUI Liangji, FAN Zijie. Study of Gear Meshing Efficiency of Electric Drive Axle with Considering System Deformation [J]. Journal of Mechanical Engineering, 2023, 59(3): 66-75.
[3]	LIU Yanping, ZHAO Yongqiang. Research on The Automatic Modelling Method for High Precision Finite Element Model of Internal Helical Gear [J]. Journal of Mechanical Engineering, 2022, 58(21): 148-160.
[4]	WEI Bingyang, WANG Zhen, YANG Jianjun, CAO Xuemei. Analysis on Quasi Hertzian Contact and Friction Characteristics of Tooth Surface Modified by Ease-off Topology [J]. Journal of Mechanical Engineering, 2021, 57(1): 61-67.
[5]	JIANG Jinke, FANG Zongde, LIU Hongmei. Loaded Tooth Contact Characteristic Analysis of Multi-gear for Planetary Transmission [J]. Journal of Mechanical Engineering, 2019, 55(15): 174-182.
[6]	CAO Xuemei, YANG Bohui, DENG Xiaozhong. Novel Decomposition Methodology for Tooth Contact Analysis and Experiment Tests [J]. Journal of Mechanical Engineering, 2018, 54(5): 47-52.
[7]	ZHOU Chi, TIAN Cheng, DING Weiqi, GUI Liangjin, FAN Zijie. Analysis of Hypoid Gear Time-varying Mesh Characteristics Based on the Finite Element Method [J]. Journal of Mechanical Engineering, 2016, 52(15): 36-43.
[8]	WEI Bingyang, DENG Xiaozhong, TONG Angxin, YANG Jianjun . Surface Synthesis Method on Generating Parameters Computation of Spiral Bevel-gears [J]. Journal of Mechanical Engineering, 2016, 52(1): 20-25.
[9]	JIANG Ping, LIU Guanglei, ZHANG Ruiting, LU Rui. A Method to Control the Contact Pattern Height of Spiral Bevel Gears in Aviation [J]. Journal of Mechanical Engineering, 2015, 51(5): 64-70.
[10]	. Cutting Principle and Tooth Contact Analysis of Spiral Bevel and Hypoid Gears Generated by Duplex Helical Method [J]. Journal of Mechanical Engineering, 2015, 51(21): 15-23.
[11]	WANG Zhonghou;LI Gang;KUBO Aizoh. Tooth Contact Analysis of Spiral Bevel Gears Based on Digital Real Tooth Surfaces [J]. , 2014, 50(15): 1-11.
[12]	MA Zhenqun;DENG Chengyi. CNC Machining Method of Whole Modified Surface of Cylindrical Gears with Arcuate Tooth Trace [J]. , 2012, 48(5): 165-171.
[13]	LIU Guanglei;ZHANG Ruiting;ZHAO Ning;JIANG Ping. An Approach to Determine Installation Errors of Spiral Bevel Gears [J]. , 2012, 48(3): 34-40.
[14]	LI Haitao;WEI Wenjun;DONG Xuezhu. Mesh Analysis and Test Verification on Two Degrees of Freedom Linear Cutting Tools Enveloping Worm Gears [J]. , 2011, 47(5): 19-25.
[15]	TANG Jinyuan;PU Taiping. Spiral Bevel Gear Meshing Stiffness Calculations Based on the Finite Element Method [J]. , 2011, 47(11): 23-29.

ANALYSIS OF CONTACT LINES ON THE PRIMEVAL TOOL FOR THE FINGER CONE TWICE GENERATED HOURGLASS WORM

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments