STATISTICAL MODELLING AND ANALYSIS OF RELATIVE DISCHARGE RATIOS IN ELECTRICAL DISCHARGE MACHINING PROCESS

Abstract

Abstract: Relations between relative discharge ratios and servo control variables are investigated through samples and statistical analysis of experimental data, normal distribution function is shown to be a suitable statistical model for the ratios. Furthermore, the internal relations between the parameters of model and the control variables are revealed and the variation of machining conditions for different control variables can be predicted by these relations. Theoretical results have been verified with experiments.

Key words: Electrical discharge machining, Relative discharge ratios, Statistical modelling

CLC Number:

TG661

Zheng Hong;Guo Yongfeng;Liu Jinchun. STATISTICAL MODELLING AND ANALYSIS OF RELATIVE DISCHARGE RATIOS IN ELECTRICAL DISCHARGE MACHINING PROCESS[J]. , 1998, 34(5): 25-28.

[1]	QIU Wenzhe, ZHANG Zhen, WANG Peng, LIU Denghua, WEI Shichuan, ZHANG Guojun. Regulation of Thermal Deformation Behavior in Wire EDM Process Based on Underwater Laser-induced Shockwave [J]. Journal of Mechanical Engineering, 2024, 60(9): 273-285.
[2]	QIU Mingbo, FU Jiongbo, DUAN Yajun, SHEN Lida, HAN Yunxiao. Study on Multi-channel Discharge Mechanism of Semiconductor Silicon Electrode [J]. Journal of Mechanical Engineering, 2019, 55(21): 208-214.
[3]	LI Dong, LIU Zhigang, WANG Yiqing, HONG Jun, LU Bingheng. Study on the Movement Rule of Discharge Products in Large Area Titanium Alloy Machining by Electrical Discharge Machining [J]. Journal of Mechanical Engineering, 2017, 53(21): 200-208.
[4]	WANG Yantao, LI Xianglong, LIU Yifan, LI Yan, ZHAO Wu, LI Wenqiang. Effect of Non-electrical Parameters on the Size of Nickel Microspheres Produced by an Ultrasound-aided Electrical Discharge Machining [J]. Journal of Mechanical Engineering, 2015, 51(11): 195-200.
[5]	WU Xiaorong;ZHANG Shuyou;QIU Lemiao;SUN Liangfeng. Decision Making Method of Process Parameter Selection for Green Manufacturing Based on a DEMATEL-VIKOR Algorithm [J]. , 2013, 49(7): 91-100.
[6]	SONG Mancang;YU Chao;ZHANG Jianlei;LIU Chong;WANG Minjie;DU Liqun. Experimental Research on Electrical Discharge Machining of Microstructure Mold Insert with Multi-station Combination Electrode [J]. , 2013, 49(15): 186-191.
[7]	CHU Zhaoliang;ZHAO Wansheng;GU Lin. Effect of Electrode Jump Motion on Machining Debris Concentration [J]. , 2013, 49(11): 185-192.
[8]	BAI Xue;ZHANG Qinhe;LI Tiantian;ZHANG Ya. Research on the Medium Breakdown Mechanism of Powder Mixed Near Dry Electrical Discharge Machining [J]. , 2012, 48(7): 186-192.
[9]	FU Xiuzhuo;ZHANG Qinhe;ZHANG Jianhua;ZHU Yujie;BAO Guanghua. Characteristics Analysis of Piezoelectric Self-adaptive Micro Electrical Discharge Machining System [J]. , 2011, 47(9): 164-168.
[10]	LIU Zhidong;QIU Mingbo;WANG Wei;TIAN Zongjun;HUANG Yinhui. Research on Electrical Discharge Machining Characteristics and Mode of Providing Power of Germanium Crystal [J]. , 2011, 47(5): 177-182.
[11]	ZHAO Jianshe;LIU Chen;WU Rui;WANG Jun;XU Jiawen. Key Technology Research of Combined Electrical Machining of Closed Integral Structure [J]. , 2011, 47(1): 169-176.
[12]	JIA Zhixin;ZHANG Hongbin;XI Anmin. Simulating and Extending Wire Electrical Discharge Machining Reliability Data by Radial Basis Function Neural Network [J]. , 2010, 46(2): 145-149.
[13]	JIA Zhenyuan;GAO Shenghui;LIU Wei;WANG Fuji;JING Shuimiao. EDM Discharge State Prediction Method Based on Local Wave Decomposition [J]. , 2009, 45(6): 113-121.
[14]	GAO Qing;ZHANG Qinhe;ZHANG Jianhua. Experimental Study of Powder-mixed Near Dry Electrical Discharge Machining [J]. , 2009, 45(11): 169-175.
[15]	SHAN Yan;WANG Gang;WU Weiwei. Electrode Orbiting Compensation in EDM Based on Generalized Offset of Tool Path [J]. , 2009, 45(10): 261-265.

STATISTICAL MODELLING AND ANALYSIS OF RELATIVE DISCHARGE RATIOS IN ELECTRICAL DISCHARGE MACHINING PROCESS

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments