| [1] |
ZENG Xin, LAI Jianping, WANG Chi, YUAN Xiaohu, LI Dingjun, YU Jiaxin.
Investigation on Nano-tribological Properties of Amorphous Alloys Based on High-throughput Co-sputtering Method
[J]. Journal of Mechanical Engineering, 2024, 60(15): 185-193.
|
| [2] |
HE Weilin, MENG Bao, WAN Min.
Study on U-bending Springback Behavior of GH4169 Ultrathin Strip
[J]. Journal of Mechanical Engineering, 2024, 60(14): 174-184.
|
| [3] |
JIANG Zhengquan, DU Xinchun, JIN Yeming, YU Laigui, YAN Mingming, TONG Yuping, HAO Yongxing, ZHANG Shengmao, ZHANG Pingyu.
Research Progress of Tribology for Graphene and Its Nanocomposites as Lubricating Additives
[J]. Journal of Mechanical Engineering, 2023, 59(21): 293-312.
|
| [4] |
HE Jinchao, ZHU Shunpeng, NIU Xiaopeng, LIAO Ding, WANG Qingyuan.
Notch Fatigue Life Prediction under Size Effect:Stress Gradient-based Theory of Critical Distance
[J]. Journal of Mechanical Engineering, 2023, 59(16): 90-106.
|
| [5] |
ZHOU Minbo, ZHAO Xingfei, CHEN Mingqiang, KE Changbo, ZHANG Xinping.
Size Effects of Growth and Evolution of Interfacial Intermetallic Compound and the Mechanical Behavior of Bump Structure Sn3.0Ag0.5Cu/Cu Cross-scale Joints in Electronic Packages
[J]. Journal of Mechanical Engineering, 2022, 58(2): 259-268.
|
| [6] |
XU Zhutian, SUN Lei, JIANG Tianhao, PENG Linfa, LAI Xinmin.
Fracture Size Effect of Titanium Sheets in Microforming and Its Meso Damage Criterion
[J]. Journal of Mechanical Engineering, 2022, 58(16): 51-57.
|
| [7] |
YIN Yuan, HUANG Weifeng, LIU Xiangfeng, LIU Ying, WANG Yuming, LI Kun.
The State-of-the-art and Future Development of Mechanical Face Seal Intelligentization
[J]. Journal of Mechanical Engineering, 2021, 57(3): 116-128.
|
| [8] |
SONG Chenfei, SUN Yuming, ZHANG Yanyan, SUN Yixiang, ZHANG Yongzhen.
Failure of Cu Rolling Triboelectric Pairs under Various Load and Voltage
[J]. Journal of Mechanical Engineering, 2019, 55(9): 63-70.
|
| [9] |
ZHANG Hui, LIU Yang, WANG Wei, QIN Liguo, DONG Guangneng.
Surface Texture Design and Its Tribological Application
[J]. Journal of Mechanical Engineering, 2019, 55(17): 85-93.
|
| [10] |
RAN Jiaqi, XU Li, WANG Jilai, GONG Feng.
Influence of Size Effect to Constitutive Model and Damage Evolution in Micro Scaled Plastic Deformation under Different Strain Rate
[J]. Journal of Mechanical Engineering, 2019, 55(16): 69-76.
|
| [11] |
CUI Mingjun, REN Siming, FAN Xiaoqiang, ZHANG Guangan, WANG Liping, XUE Qunji.
Influence of Modulation Ratio on the Tribological and Electrochemical Behaviors of Multilayer DLC Coatings
[J]. Journal of Mechanical Engineering, 2018, 54(6): 25-31.
|
| [12] |
ZHOU Jie, WU Jinjun, YU Gegang, YANG Yousheng, DUAN Haitao, YI Meng.
Study on Stress and Tribology of Micro Contact Surface in Seawater
[J]. Journal of Mechanical Engineering, 2018, 54(3): 88-94.
|
| [13] |
YU Rufei, CHEN Wei.
Research Progress and Prospect of Surface Texturing in Industrial Tribology
[J]. Journal of Mechanical Engineering, 2017, 53(3): 100-110.
|
| [14] |
ZHANG Boyu, CHEN Zhanghua.
Simulating Indentation Experiment by Finite Element Method Using Mechanism-based Strain Gradient Plasticity and Quadrilateral Area Coordinate Method
[J]. Journal of Mechanical Engineering, 2017, 53(2): 74-83.
|
| [15] |
LIU Can, WU Jingquan, LIU Huanlao, TAN Guangyu.
Research on Size Effect of Cutting-force for Flat End Mills and Estimation of Its Coefficient
[J]. Journal of Mechanical Engineering, 2017, 53(13): 199-208.
|
