GENERAL PRINCIPLE AND ERROR-VARIATION ANALYSIS OF ON-MACHINE MEASURING LARGE GEAR PROFILE ERROR WITH RACK-HEAD

›› 2003, Vol. 39 ›› Issue (3): 151-154.

• Article • Previous Articles Next Articles

GENERAL PRINCIPLE AND ERROR-VARIATION ANALYSIS OF ON-MACHINE MEASURING LARGE GEAR PROFILE ERROR WITH RACK-HEAD

Li Wenlong;Shang Xiangdong;Jin Jiaqi;Zheng Peng;Liu Jian

DaLian Nationalities University Shenyang University of Technology Dalian University of Technology

Published:2003-03-15

Abstract

Abstract: In view of characteristics of large gears, the general principle of a rack-head on-machine measuring large gear profile errors is stated. In the existence of error factors, the engaging process of the measuring rack and measured involute profile is analyzed by means of error-variation relation. And the precision design theory of the on-machine measuring instrument with which large gear profile errors are measured.

Key words: Engagement characteristics, Error-variation, Large gear, On-machine measurement, Profile error, Rack-head

CLC Number:

TH701

Li Wenlong;Shang Xiangdong;Jin Jiaqi;Zheng Peng;Liu Jian. GENERAL PRINCIPLE AND ERROR-VARIATION ANALYSIS OF ON-MACHINE MEASURING LARGE GEAR PROFILE ERROR WITH RACK-HEAD[J]. , 2003, 39(3): 151-154.

[1]	GAO Feng, ZHAO Bohan, LI Yan, WANG Chunjun. On-machine Measurement Scheme Generation and Optimization Method for Multi-axis CNC Machine Tool [J]. Journal of Mechanical Engineering, 2017, 53(20): 13-19.
[2]	YANG Tianlong;ZHAO Qiancheng;YIN Xiyun;HUANG Dongzhao. Proposal for Measuring Profile of Precision Rotor Based on Simulation Re-measurement [J]. , 2013, 49(18): 69-77.
[3]	SHI Zhaoyao;LIN Hu;LIN Jiachun;ZHANG Bai. Current Status and Trends of Large Gears Metrology [J]. , 2013, 49(10): 35-44.
[4]	CHEN Fengjun;YIN Shaohui;FAN Yufeng;ZHU Yongjian;LIU Qing. Ultra-precision Single-point Grinding Technique and Profile Error Compensation Method for Machining Aspheric Mould [J]. , 2010, 46(23): 186-191.
[5]	LIAO Ping. Calculating of Complex Surface Profile Error Based on Subdivision Approach Algorithm and Genetic Algorithm [J]. , 2010, 46(10): 1-7.
[6]	LI Kailing;SUN Naikun;CUI Jianping;ZHAO Jun. Influence on Gear Mesh Noise from Different Tooth Profile Errors of Involute Gears [J]. , 2008, 44(3): 234-240.
[7]	Duan Zhenyun;Liu Jian;Fu Jingshun;Jin Jiaqi. MEASUREMENT OF LARGE GEARS BASED ON STRAIGHT GENERATRIX FAMILY ERROR [J]. , 2005, 41(8): 176-179.
[8]	Tian Shijie;Guo Junjie;Jiang Zhuangde;Wang Dou. GENERAL METHOD OF DETERMINATION OF ROTATIONAL CONICOID PROFILE ERROR [J]. , 2005, 41(7): 62-65.
[9]	Han Yunpeng;Meng Jianfeng. INTELLECTUALIZED DRESSING OF THE GRINDING WHEEL IN THE PROCESS OF GRINDING ZK WORM [J]. , 2004, 40(5): 178-183.
[10]	Ding Han;Zhu Limin;Xiong Zhenhua. SURVEY ON COORDINATE MEASUREMENT, GEOMETRIC MODELING AND RP OR NC CODE GENERATION FROM MEASURED DATA POINTS [J]. , 2003, 39(11): 28-37.

GENERAL PRINCIPLE AND ERROR-VARIATION ANALYSIS OF ON-MACHINE MEASURING LARGE GEAR PROFILE ERROR WITH RACK-HEAD

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 10

Recommended Articles

Metrics

Comments