Multi-dimensional Numerical Simulation of Operating Process of CNG Engine Using Detailed Chemical Kinetics with CFD

Abstract

Abstract: Numerical simulation of engine combustion using CFD and detailed chemical kinetics is accomplished by integrating CFD code KIVA3V with chemical kinetics code CHEMKINII. To reduce the computation time, the coupled software is reprogrammed to have the function of parallel computing and the revised software is calculated in a massively parallel processor. In order to have a better prediction of in-cylinder combustion and intermediate involving process, the coupled simulation takes the effects of turbulence, thermodynamic and chemistry into account and a turbulent combustion model which balances the effect of turbulence and detailed chemical kinetics is applied. The model is validated by using the experiment data from modified diesel engine-WT615. The results show that the simulation result has a good consistency with experiment data, the simulation provides the information of in-cylinder distribution of intermediates and computation has good parallel efficiency and acceleration ratio.

Key words: Combustion, Detailed chemical kinetics, Parallel computing

CLC Number:

TG156

ZHANG Xin;WANG Yujun;LI Congxin;WU Jianfeng. Multi-dimensional Numerical Simulation of Operating Process of CNG Engine Using Detailed Chemical Kinetics with CFD[J]. , 2009, 45(11): 225-229.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2009/V45/I11/225

[1]	YU Lixin, WANG Biao, YIN Xiaojun, WANG Xibin, DUAN Hao, HU Erjiang, ZENG Ke. Effect of Injection and Spark Timing on the Performance of Direct Injection Methanol Engine with High Compression Ratio [J]. Journal of Mechanical Engineering, 2026, 62(2): 397-406.
[2]	LI Siqi, LIU Kang, CHEN Yiming, CAI Jiale, BAI Yingchun. Static and Dynamic Muti-objective Topology Optimization of 3D Thin-walled Infill Structures Towards to Complex Design Domains [J]. Journal of Mechanical Engineering, 2025, 61(23): 193-202.
[3]	CHENG Haiying, LI Xuan, GAO Ruifa, YAN Wengang, HU Zhiyong. Structural Design and Performance Analysis for Pulverized Coal Burner of Aggregate Drying [J]. Journal of Mechanical Engineering, 2025, 61(2): 310-320.
[4]	CHENG Haiying, LI Xuan, ZHANG Yong. Numerical Simulation and Air Distribution Parameters Optimization for Pulverized Coal Burner of Aggregate Drying [J]. Journal of Mechanical Engineering, 2024, 60(20): 289-299.
[5]	BAI Yingchun, LIU Kang, LI Chao, HAN Xu. Eigenfrequency Topology Optimization of 3D Shell-infill Structures Based on Large-scale Parallel Computing [J]. Journal of Mechanical Engineering, 2024, 60(11): 32-40.
[6]	ZHANG Heng, LI Hao, DING Xiao-hong, HU Tian-nan, PAN Sheng, ZHU Ben-liang, NI Wei-yu, XU Shi-peng. Numerical Study on the Body-fitted Topology Optimization for Three-dimensional High Resolution Structure Design [J]. Journal of Mechanical Engineering, 2022, 58(5): 136-143.
[7]	ZHAN Mei, DONG Yunda, ZHAI Zhuolei, FAN Xiaoguang, SHI Zhipeng, AN Qiang. Review on Fast Numerical Simulation Method for Plastic Forming [J]. Journal of Mechanical Engineering, 2022, 58(16): 2-20.
[8]	SUN Jun, ZHANG Xiao, ZHU Jianxiong, GAO Yaming, LI Biao, ZHU Shaoyu, LI Yue, REN Yanping, ZHU Guixiang. On the Piston Secondary Motion of IC Engine Considering the Lubricating Oil Transport [J]. Journal of Mechanical Engineering, 2021, 57(6): 164-170.
[9]	LI Shasha, SHU Liang, YANG Yanfang, CHEN Dingfang. Digital Twin Workshop System Rapid Construction Method Based on Parallel Computing of Logic and Model Data [J]. Journal of Mechanical Engineering, 2021, 57(17): 76-85.
[10]	LIU Fuguo, GUO Xingen. Pulverized Coal Burnout Determination in Furnace with Air Staging and It's Comparison with Field Test [J]. Journal of Mechanical Engineering, 2020, 56(24): 208-218.
[11]	LIU Guangsheng, SUN Jun, LI Biao, ZHU Shaoyu. Lubrication Analysis of Oil-control-ring and Cylinder Liner Frictional Pair Considering Oil Feeding Condition [J]. Journal of Mechanical Engineering, 2019, 55(7): 102-109.
[12]	LIU Mingyuan, CHEN Guoqing, DAI Weibao, SUN Junwei. Influence of Air Leakage on the NO_x Emission and Combustion Characteristics [J]. Journal of Mechanical Engineering, 2019, 55(24): 210-215,226.
[13]	ZHANG Yajun, WANG Hewu, FENG Xuning, OUYANG Minggao, ZHOU Anjian, SU Ling, YANG Huiqian. Research Progress on Thermal Runaway Combustion Characteristics of Power Lithiumion Batteries [J]. Journal of Mechanical Engineering, 2019, 55(20): 17-27.
[14]	GONG Shuguang, LIAO Yuli, XIE Guilan, ZHANG Jianping. Study on GPU Parallel Speedup and Application of FE-EFG Coupling Method [J]. Journal of Mechanical Engineering, 2018, 54(11): 197-204.
[15]	SUN Jun, LIU Guangsheng, MIAO Enming, HAO Feifei, ZHU Shaoyu, HU Xinliang, LI Yue. Transport of Lubricating Oil between Piston Skirt and Cylinder Liner for Internal Combustion Engine [J]. Journal of Mechanical Engineering, 2016, 52(22): 138-145.

Multi-dimensional Numerical Simulation of Operating Process of CNG Engine Using Detailed Chemical Kinetics with CFD

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments