AN APPROACH TO MULTIPLE ATTRIBUTE EVALUATION IN MANUFACTURABILITY ANALYSIS FOR BLANK SELECTIONS

›› 1999, Vol. 35 ›› Issue (4): 42-46.

• Article • Previous Articles Next Articles

AN APPROACH TO MULTIPLE ATTRIBUTE EVALUATION IN MANUFACTURABILITY ANALYSIS FOR BLANK SELECTIONS

Qiao Lihong;Ma Tao;Wang Shuchun

Beijing University of Aeronautics and Astronautics

Published:1999-07-01

Abstract

Abstract: An approach to the evaluation of multiple attributes for design for manufacturing in blank selections is presented. The approach is based on fuzzy sets and relational algebra. It is suitable for linguistic attributes and quantitative attributes. By calculating the extent that an attribute satisfies the corresponding design requirement, the performance of a design alternative is evaluated comprehensively. The application of this approach is illustrated by an example.

Key words: Attribute, Blank selection, Compatibility, Design for manufacturing

CLC Number:

TH122

Qiao Lihong;Ma Tao;Wang Shuchun. AN APPROACH TO MULTIPLE ATTRIBUTE EVALUATION IN MANUFACTURABILITY ANALYSIS FOR BLANK SELECTIONS[J]. , 1999, 35(4): 42-46.

[1]	YU Jinxu, YAN Jianhua, XIAO Junming, LI Yongquan, XIE Ping, ZHANG Lijie. Establishment and Verification of Finger Joint Kinematic Model Based on the Combination of Medicine and Engineering [J]. Journal of Mechanical Engineering, 2024, 60(15): 149-159.
[2]	YAN Ningning, WANG Jian, SUN Jixing, LI Qingmin. Review of Research on Medium and Low Speed Maglev Transportation Grounding Systems [J]. Journal of Electrical Engineering, 2023, 18(3): 35-45.
[3]	LIU Yihang, ZHOU Li, HAN Xiong, ZHANG Mingliang, GENG Daxi, LIU Lianxing, YIN Xiaoming, JIANG Xinggang, ZHANG Deyuan. Study on Compatibility between Wave-motion Ultrasonic Milling and Post Treatment Process of Ti-6Al-4V [J]. Journal of Mechanical Engineering, 2023, 59(23): 320-330.
[4]	WANG Lei, JIN Xiao, TANG Hongtao, LI Xixing, LI Yibing, GUO Shunsheng, GUAN Sijia. Personalized Manufacturing Service Recommendation Method Based on Federated Learning Framework [J]. Journal of Mechanical Engineering, 2023, 59(12): 149-161.
[5]	CHANG Boyan, ZHANG Haonan, LIANG Dong, JIN Guoguang. Foldability Analysis of Thick-panel Origami Mechanism with Third-order Magic Square Topology [J]. Journal of Mechanical Engineering, 2023, 59(11): 201-212.
[6]	KONG Lin, WANG Liming, Lü Xiaoteng, LI Fangyi. Decision-making for Product Life Cycle Design Solution Based on Multi-layer Constraints Satisfaction Problem [J]. Journal of Mechanical Engineering, 2023, 59(11): 276-289.
[7]	ZHU Shuo, PAN Zhiqiang, JIANG Zhigang, YAN Wei, ZHANG Hua. A Survey on Remanufacturing Upgrade Design of Used Mechanical and Electrical Products Based on Multi-life Characteristic [J]. Journal of Mechanical Engineering, 2022, 58(7): 183-192.
[8]	Caroline Krause, Stephan Frei. Frequency-selective Optimization of Periodic Gate Control Signals in DC/DC Converters for EMI-reduction [J]. Chinese Journal of Electrical Engineering, 2022, 8(4): 11-18.
[9]	Hong Li, Siyi Wang, Chongmo Zhang, Bo Zhang. Dual-current-injection CSCC Active Common-mode EMI Filters with High Insertion Loss for DC-DC Converters^* [J]. Chinese Journal of Electrical Engineering, 2022, 8(4): 19-29.
[10]	Juan Ni, Sijia Hu, Yong Li, Jinjie Lin, Qianyi Liu, Peiyao Liu, Lihong Dong. Novel Wind Power Grid-connection System Using Inductive Filtering Technology^* [J]. Chinese Journal of Electrical Engineering, 2022, 8(3): 102-111.
[11]	Lu Wan, Abduselam H. Beshir, Xinglong Wu, Xiaokang Liu, Flavia Grassi, Giordano Spadacini, Sergio A. Pignari. Black-box Modeling of Converters in Renewable Energy Systems for EMC Assessment: Overview and Discussion of Available Models^* [J]. Chinese Journal of Electrical Engineering, 2022, 8(2): 13-28.
[12]	SHEN Huimin, GE Ruikang, GE Di, LI Bingchu, GAN Yi, QIN Longhui, YANG Geng. Exoskeleton Design and Human-Machine Compatibility Analysis for Shoulder Rehabilitation Based on Synergy Characteristic [J]. Journal of Mechanical Engineering, 2022, 58(19): 34-44.
[13]	ZHAO Lihui, LI Qichen, FENG Jinzhi, ZHENG Songlin, LIU Xinrong. Research on Prediction Method of Hub-bearing Service Life under Random Road Load [J]. Journal of Mechanical Engineering, 2021, 57(10): 77-86.
[14]	LI Yanbiao, WANG Zesheng, SUN Peng, XU Taotao, QIN Songyang. Dynamic Load Distribution Optimization for a 4-DOF Redundant and Series-parallel Hybrid Humanoid Arm [J]. Journal of Mechanical Engineering, 2020, 56(9): 45-54.
[15]	BAI Zhonghang, ZHANG Shan, YU Fei, TAN Runhua. Research on Trimming Method of Standard Solutions Aided Multi-level System Resource Derivation [J]. Journal of Mechanical Engineering, 2020, 56(11): 108-120.

AN APPROACH TO MULTIPLE ATTRIBUTE EVALUATION IN MANUFACTURABILITY ANALYSIS FOR BLANK SELECTIONS

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments