VIBRATION ANALYSIS OF A LARGE SCALE REDUCER GEAR TRANSMISSION SYSTEM

Abstract

Abstract: The torsional-crosswise coupling vibration model of a central symmtric reducer gear-transmission system is developed. The cyclical excitation is expressed in Fourier series, and the system dynamic response is calculated. The sensitivity of the system natural frequencies with respect to the output spring-suspension structure is analysed, and the influence of the spring-suspension structure on the gear dynamic load factors is studied by practical example analysing.

Key words: Coupling vibration, Dynamic load, Gear, Reducer, Sensitivity

Chen Xuedong;Yang Zhiqian;Liu Gang. VIBRATION ANALYSIS OF A LARGE SCALE REDUCER GEAR TRANSMISSION SYSTEM[J]. , 1995, 31(5): 56-63.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y1995/V31/I5/56

[1]	ZHANG Haitao, CHEN Zaigang, YANG Guojun, CHEN Zhihui, CHEN Xin, YANG Jizhong. Multi-parameter and Multi-objective Optimization of Mountain Rack Vehicle Suspension Based on Particle Swarm Optimization [J]. Journal of Mechanical Engineering, 2026, 62(4): 296-308.
[2]	LU Kaiyi, WANG Zeng, WANG Xianliang, LU Zehua, LIU Huaiju. Fatigue Reliability Analysis of Aero-engine Gear Transmission System Considering Thermal-mechanical Loads [J]. Journal of Mechanical Engineering, 2026, 62(3): 407-419.
[3]	TIAN Baolin, YANG Xuecong, LIU Jiaxing, YAN Zhen, YU Haitao, GAO Haibo, DENG Zongquan. Reusable Launch Vehicle Landing Gear Mechanism Technologies: A Review [J]. Journal of Mechanical Engineering, 2026, 62(1): 18-40.
[4]	GUO Erkuo, LIU Shulong, CHEN Ziyan, QIAO Hua, LIU Deyong, CHEN Ming. Review of Power Skiving Theory and Method for Gear Manufacturing [J]. Journal of Mechanical Engineering, 2025, 61(9): 335-349.
[5]	LIU Dongning, GE Yanjun, YANG Junyue, LIU Fang. Calculation of Eccentric Magnetic Field and Dynamic Characteristics Analysis of Multi-shafts Ring-plate Magnet Gear [J]. Journal of Mechanical Engineering, 2025, 61(9): 372-382.
[6]	WU Yanling, TANG Baoping, DENG Lei, FU Hao. Edge-side Fault Diagnosis of Wind Turbine Gearboxes by Low-pass Screening Neural Architecture Search [J]. Journal of Mechanical Engineering, 2025, 61(7): 361-372.
[7]	GUO Erkuo, ZHANG Hongchuan, ZHOU Yihan, CHEN Ming. Chamfer Cut Method of Cylindrical Gear Based on Tooth Profile Generated by Cutter Edge with Two-parameter [J]. Journal of Mechanical Engineering, 2025, 61(5): 191-201.
[8]	CAO Bing, HE Kun, LI Guolong, CHEN Yongpeng. Efficient Numerical Method of Loaded Contact Analysis for Unparallel Beveloid Gears Considering Multi-tooth Contact [J]. Journal of Mechanical Engineering, 2025, 61(5): 239-249.
[9]	ZHAO Lihui, CHEN Pei, WANG Zhen, ZHANG Dongdong, WENG Shuo, ZHU Yiguang. Research on Prediction Method of Vehicle Dynamic Load Under Operating Conditions [J]. Journal of Mechanical Engineering, 2025, 61(4): 249-261.
[10]	WANG Hanming, DONG Qingbing, CHEN Zhuang, ZHAO Bo, SHI Xiujiang. Life Prediction of Planetary Gearbox Based on Competing Failure Mechanisms and Experimental Study [J]. Journal of Mechanical Engineering, 2025, 61(3): 284-298.
[11]	LING Siying, ZHANG Heng, YANG Zhenxiang, ZHANG Jiayang, LING Ming, WANG Fengtao. Research on the Relevant Meshing Theories and Meshing Performance of Elliptical Toroidal Worm Gears and Cylindrical Gears [J]. Journal of Mechanical Engineering, 2025, 61(3): 325-336.
[12]	HOU Jinbo, OUYANG Fangting, TANG Jinyuan, DING Han. Prediction Method for Lapping Surface Micro-topography of Hypoid Gear [J]. Journal of Mechanical Engineering, 2025, 61(24): 1-11.
[13]	DOU Shuo, LIU Zechao, LIU Pengfei. Influence of Machining and Installation Errors on the Deviation Load Behavior of Double-helical Transmission Gear in High-speed Train [J]. Journal of Mechanical Engineering, 2025, 61(24): 190-201.
[14]	MO Shuai, LI Yaxin, BAI Daixin, CHEN Sujiao, YAO Bowei, SHI Wenai, PENG Nanjiang, ZHANG Wei. Meshing Stiffness of Non-circular Planetary Transmission System Considering Random Pitting Distribution [J]. Journal of Mechanical Engineering, 2025, 61(23): 1-10.
[15]	XIONG Wanli, WANG Jian, XUE Hainan, CHEN Zhenyu, XUE Jian. Research on the Axis Motion of the Foil Bearing Rotor System in Fuel Cell Air Compressors under Acceleration Variable Load Conditions [J]. Journal of Mechanical Engineering, 2025, 61(23): 75-86.

VIBRATION ANALYSIS OF A LARGE SCALE REDUCER GEAR TRANSMISSION SYSTEM

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments