Modeling and Simulation of GMAW-P Welding Power-arc System

Abstract

Abstract: Due to nonlinear and time variable characteristics of GMAW-P arc welding, the research and design of GMAW-P welding power source and the selection of its control parameter have intrinsic difficulty. The dynamic simulation model of the GMAW-P welding power source and arc system based on S-function module design of Matlab/Simulink software is built. The study of dynamic arc length disturbance of GMAW-P welding power source and arc system is implemented after finishing optimum design of controller parameters. The results of simulation are well in consistent with those of welding experiments, which proves the correctness of this simulation model, the adaptability of controller parameters and dynamic performance of welding control system. Thus a new approach for modeling study and controller parameter design of GMAW-P welding power source is provided.

Key words: Arc, Matlab simulation, Power source, Pulse gas metal arc welding

CLC Number:

TG434

HUA Xueming;SONG Zheng;LI Fang;WU Yixiong;FAN Yong. Modeling and Simulation of GMAW-P Welding Power-arc System[J]. , 2010, 46(8): 78-82.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2010/V46/I8/78

[1]	WANG Zi, BAI Xianxu, LI Jie, SUN Jun. Hierarchical Fault-tolerant Control Strategy for Actuator Failures in Automotive Active Suspension Systems [J]. Journal of Mechanical Engineering, 2026, 62(8): 85-99.
[2]	LIU Shuaishuai, ZHANG Lipeng, MA Haoran, WANG Xingyu, ZHANG Junda, ZHAO Minghui, ZHEN Longxin. Chassis Coordinated Control for Corner Module Architecture Electric Vehicles with Single Wheel Overcoming Obstacle [J]. Journal of Mechanical Engineering, 2026, 62(8): 382-397.
[3]	XIAO Yue, HE Yi, ZHANG Ming. Hierarchical MPC-based Trajectory Tracking Control for Distributed Four-wheel-drive Vehicles [J]. Journal of Mechanical Engineering, 2026, 62(8): 475-488.
[4]	WANG Guoqing, XIONG Huan, HOU Junjie, LIU Jiaojian. Overview of the Development and Application of Aerospace System Engineering Driven by Digital Technology [J]. Journal of Mechanical Engineering, 2026, 62(7): 1-14.
[5]	HUANG Yu, WANG Ru, WANG Guoxin, LI Yingjie, LI Haokun, WANG Lanbing, ZHANG Wenfeng, YAN Yan. Research on an Intelligent Decision Support Methodology for Complex Equipment System Architecture Design [J]. Journal of Mechanical Engineering, 2026, 62(7): 67-96.
[6]	QI Xiaojing, XIAO Yayue, ZHONG Wei, GAO Bolin, WANG Yong, SUN Dihua, LI Keqiang. Intelligent Vehicle Cyber-physical System Modeling Method Based on Scenario-oriented MBSoSE [J]. Journal of Mechanical Engineering, 2026, 62(6): 267-291.
[7]	YANG Fei, ZHAO Lei, GE Lei, WANG Xiaohu, QUAN Long, XIONG Xiaoyan. Composite Pressure Control Method of Electro Hydraulic Power Source Based on Pressure Closed Loop Feedback and Speed Compensation [J]. Journal of Mechanical Engineering, 2026, 62(6): 400-408.
[8]	TIAN Shichen, ZHANG Chunjiang, GAO Liang, LI Xinyu. Multi-objective Scheduling Method of Distributed Assembly Job Shop for Final Assembly Pulling Production Mode [J]. Journal of Mechanical Engineering, 2026, 62(5): 26-36.
[9]	ZHENG Bo, YU Shengfu, YU Zhenyu, MENG Xiaohao. Study on Wire Arc Additive Manufacturing of SiC Aluminum Alloy Composite Gradient Space Exploration Structure [J]. Journal of Mechanical Engineering, 2026, 62(4): 107-117.
[10]	XU Tianqiu, FU Rui, LUO Longxi, XU Hanwen, MAO Hao, LIU Changmeng. Additive Manufacturing Technologies and Research Progress for Large-scale Lattice Structures [J]. Journal of Mechanical Engineering, 2026, 62(3): 2-14.
[11]	LI Kai, JIANG Xiao, FANG Xuewei, CHEN Ruikai, WANG Hang, LI Changze, HUANG Ke, LU Bingheng. Effect of Laser Shock Peening on the Properties of Al-Zn-Mg Thin-walled Structures Fabricated by Wire Arc Directed Energy Deposition [J]. Journal of Mechanical Engineering, 2026, 62(3): 137-145.
[12]	HUANG Mian, YANG Bing, LIAO Zhen, Lü Peijin, XIAO Shoune, YANG Guangwu, ZHU Tao. Research on Wear of Pantograph Slide Plate: A Review [J]. Journal of Mechanical Engineering, 2025, 61(8): 193-213.
[13]	CHEN Yuhong, LI Jiaxin, ZHANG Genge, WEN Zefeng, TAO Gongquan. Metro Wheel Profile Design with Low Flange Wear Based on Multi-objective Optimization [J]. Journal of Mechanical Engineering, 2025, 61(8): 261-271.
[14]	DING Chuan, ZHU Kuankuan, ZHU Haixin, MENG Bin, XIA Ning, RUAN Jian. Study of High-frequency Unidirectional Sinusoidal Flow Control Valve [J]. Journal of Mechanical Engineering, 2025, 61(8): 362-373.
[15]	WU Yanling, TANG Baoping, DENG Lei, FU Hao. Edge-side Fault Diagnosis of Wind Turbine Gearboxes by Low-pass Screening Neural Architecture Search [J]. Journal of Mechanical Engineering, 2025, 61(7): 361-372.

Modeling and Simulation of GMAW-P Welding Power-arc System

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments