STUDY ON PRODUCT DESIGN PROCESS BASED ON TECHNOLOGY EVOLUTION

Abstract

Abstract: S-curve in technology evolution is analyzed. A procedure to forecast the position in S-curve using the method of theory of inventive problem solving (TRIZ) is discussed. From the basic ideas of evolution patterns and lines of TRIZ, two properties of the core technology for products are produced. It is pointed out that technology evolution is a process of constructional change along the evolution lines of TRIZ. Based on this principle, a new process model using IDEF3 is developed to describe the design activities. An engineering case shows the application of the process.

Key words: Theory of inventive problem solving Evolution pattern, Evolution line Product design, Process model, Technology evolution

CLC Number:

TH122

Tan Runhua;Yuan Caiyun;Zhang Ruihong Cao Dongxing. STUDY ON PRODUCT DESIGN PROCESS BASED ON TECHNOLOGY EVOLUTION[J]. , 2002, 38(12): 60-65.

[1]	ZHANG Chao, ZHOU Guanghui, LI Jingjing, WEI Zhibo, QIN Tianyu. Research on the Construction and Application of Digital Twin Process Model for Intelligent Process Planning of Aviation Complex Parts [J]. Journal of Mechanical Engineering, 2024, 60(6): 32-43.
[2]	ZHU Shangshang, YU Huiling, DONG Yenan, LUO Shijian. A Product Creative Design Method That Incorporates the Creation of Consumer Groups [J]. Journal of Mechanical Engineering, 2024, 60(5): 276-287.
[3]	YANG Minghui, DENG Ben, YI Jiale, PENG Fangyu, PAN Zhiqian, ZHANG Hang. Review on Removal Mechanism and Process Modeling in Machining of Metal Matrix Composites [J]. Journal of Mechanical Engineering, 2023, 59(19): 460-474.
[4]	JIANG Zhigang, ZHANG Junhui, ZHU Shuo, YAN Wei, ZHANG Hua. Research on Design Process Model of Used Product Remanufacturing for Life Customization [J]. Journal of Mechanical Engineering, 2023, 59(13): 238-245.
[5]	HAN Feiyan, ZHANG Dinghua, WU Baohai, ZHANG Ying. Morphing Technology for Generating Intermediate Roughing Models in Multi-axis Machining [J]. Journal of Mechanical Engineering, 2017, 53(3): 155-161.
[6]	ZHANG Peng, DONG Yafan, ZHANG Huangao, ZHANG Jianhui, TAN Runhua. Functional Decomposition Process Model for Complex Electromechanical Based on Design-centric Complexity and TRIZ [J]. Journal of Mechanical Engineering, 2016, 52(23): 17-24.
[7]	LIANG Rui, ZHANG Jianhui, TAN Runhua, LI Yong. Design Process Model and Application of the Existing Product Function Innovation [J]. Journal of Mechanical Engineering, 2016, 52(23): 50-61.
[8]	YU Fei, LIU Fang, TAN Runhua, LIU Zhiguang. Construction of Multi-level Trimming Method Set Based on TRIZ [J]. Journal of Mechanical Engineering, 2015, 51(21): 156-164.
[9]	LI Taifu;HOU Jie;YAO Lizhong;YI Jun;GU Xiaohua;YOU Yongtao. Kalman Artificial Neural Network with Measurable Noise Estimation by Gamma Test for Dynamic Industrial Process Modeling [J]. , 2014, 50(18): 29-35.
[10]	WANG Jun;ZHANG Xiaohui;LIU Kai;ZHANG Dahai. Investigation of Compression Process and Design Theories in Novel Scroll Multiphase Pump [J]. , 2012, 48(2): 172-178.
[11]	CAO Guozhong;GUO Haixia;TAN Runhua;ZHANG Chengye LI Qinghai. Research on Function Evolution, Combination and Failure Mode for Product Function Innovation [J]. , 2012, 48(11): 29-38.
[12]	SUN Jianguang;TAN Runhua;JIANG Ping. Model for Roadmapping Disruptive Innovation Based on Technology Evolution Theory [J]. , 2012, 48(11): 11-20.
[13]	LIU Fang;JIANG Ping;TAN Runhua. Product Integrated Innovation Based on the Technological Hybridization [J]. , 2011, 47(21): 123-132.
[14]	QIAO Lihong;KAO Shuting;WANG Chao. Process Modeling and Simulation for Multi-level Network Project Planning [J]. , 2011, 47(10): 152-156.
[15]	YANG He;LI Luoxing;WANG Qudong;GUO Lianggang. Research on the Development of Advanced Forming for Lightweight Alloy Materials Area [J]. , 2010, 46(12): 31-42.

STUDY ON PRODUCT DESIGN PROCESS BASED ON TECHNOLOGY EVOLUTION

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments