Intelligent Fault Detection for Rolling Element Bearing Based on FCKT and Deep Auto-coding Neural Network

doi:10.3901/JME.2019.07.065

Abstract

Abstract: Real-time, fast, and batch processing of vibration signals have become a future development trend in the field of fault diagnosis. However, it may lead to data dimensional disasters. In view of the fact that the long running time and the low fault identification accuracy of deep learning algorithm under the condition of large sample. The frequency spectrum correlation Kurtosis of original time domain signal is calculated under different iteration periods (FCKT) as new samples data and use the deep auto-coding neural network is used to realize the intelligent fault classification of planetary gearbox. Compared with the original samples, the new samples reduce the data dimension and shorten the analysis time. At the same time, the differences between the samples are more prominent based on the original information of each sample data. In addition, the method solves the problems that the weight parameters between layers of deep learning algorithm are set according to experience and the classification accuracy is reduced by reducing the number of hidden nodes layer by layer to improve the calculation efficiency. Finally, the validity of the algorithm is verified by comparison of experimental data.

Key words: correlation Kurtosis for different iteration periods (FCKT), deep auto-coding, intelligent fault classification

CLC Number:

TH113

YANG Rui, LI Hongkun, WANG Chaoge, HAO Baitian. Intelligent Fault Detection for Rolling Element Bearing Based on FCKT and Deep Auto-coding Neural Network[J]. Journal of Mechanical Engineering, 2019, 55(7): 65-72.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2019.07.065

http://www.cjmenet.com.cn/EN/Y2019/V55/I7/65

References

[1] 雷亚国,贾峰,周昕,等. 基于深度学习理论的机械装备大数据健康监测方法[J]. 机械工程学报, 2015, 51(21):49-56. LEI Yaguo, JIA Feng, ZHOU Xin, et al. A deep learning-based method for machinery health monitoring with big data[J]. Journal of Mechanical Engineering,2015, 51(21):49-56.
[2] HINTON G E, SALAKHUTDINOV R R. Reducing the dimensionality of data with neural networks[J]. Science, 2006, 313(5786):504-507.
[3] TAO S, ZHANG T, YANG J, et al. Bearing fault diagnosis method based on stacked autoencoder and softmax regression[C]//Proceedings of the Control Conference, 2015:6331- 6335.
[4] JIA F, LEI Y, LIN J, et al. Deep neural networks:A promising tool for fault characteristic mining and intelligent diagnosis of rotating machinery with massive data[J]. Mechanical Systems & Signal Processing, 2016, 72:303-315.
[5] LEI Y, JIA F, LIN J, et al. An intelligent fault diagnosis method using unsupervised feature learning towards mechanical big data[J]. IEEE Transactions on Industrial Electronics, 2016, 63(5):3137-3147.
[6] SHAO H D, JIANG H K, LIN Y, et al. A novel method for intelligent fault diagnosis of rolling bearings using ensemble deep auto-encoders[J]. Mechanical Systems and Signal Processing, 2018, 102:278-297.
[7] SUN W, SHAO S, ZHAO R, et al. A sparse auto-encoder-based deep neural network approach for induction motor faults classification[J]. Measurement, 2016, 89:171-188.
[8] 陈仁祥,杨星,杨黎霞,等. 栈式稀疏加噪自编码深度神经网络的滚动轴承损伤程度诊断[J]. 振动与冲击, 2017, 36(21):125-131. CHEN Renxiang, YANG Xing, YANG Lixia, et al. Fault severity diagnosis method for rolling bearings based on a stacked sparse denoising auto-encoder[J]. Shock and Vibration, 2017, 36(21):125-131.
[9] CHEN R, CHEN S, HE M, et al. Rolling bearing fault severity identification using deep sparse auto-encoder network with noise added sample expansion[J]. Journal of Risk & Reliability, 2017, 231(6):666-679.
[10] AHMED H O A, WONG M L D, NANDI A K. Intelligent condition monitoring method for bearing faults from highly compressed measurements using sparse over-complete features[J]. Mechanical Systems & Signal Processing, 2018, 99:459-477.
[11] CHEN L, WANG Z Y, QIN W L, et al. Fault diagnosis of rotary machinery components using a stacked denoising autoencoder-based health state identification[J]. Signal Processing, 2017, 130:377-388.
[12] SCHOLKOPF B, SMOLA A, MULLER K R. Nonlinear component analysis as a kernel eigenvalue problem[J]. Neural Computation, 1998, 10(5):1299-1319.
[13] MCDONALD G L, ZHAO Q, ZUO M J. Maximum correlated Kurtosis deconvolution and application on gear tooth chip fault detection[J]. Mechanical Systems & Signal Processing, 2012, 33(1):237-255.
[14] CHEN X, ZHANG B, FENG F, et al. Optimal resonant band demodulation based on an improved correlated Kurtosis and its application in bearing fault diagnosis[J]. Sensors, 2017, 17(2):360-379.
[15] FENG J, LEI Y, SHAN H, et al. Early fault diagnosis of bearings using an improved spectral Kurtosis by maximum correlated Kurtosis deconvolution[J]. Sensors, 2015, 15(11):29363-29377.
[16] ZHOU H, CHEN J, DONG G. Application of maximum correlated Kurtosis deconvolution on rolling element bearing fault diagnosis[M]. London:Springer International Publishing, 2015.
[17] TANG G, WANG X, HE Y. Diagnosis of compound faults of rolling bearings through adaptive maximum correlated kurtosis deconvolution[J]. Journal of Mechanical Science and Technology, 2016, 30(1):43-54.