STUDY ON DETECTION OF CHATTER FOR MILLING BASED ON CURRENT SIGNAL

Abstract

Abstract: A dynamic model of chatter with two degree of freedom for milling process is presented, and the mechanism of chatter is analyzised. On the basis of these, the model of detecting the chatter based on current signal is given, which uses the ratio of high frequent and low frequent of current signal of spindle. The method which can detects the chatter reliably eliminates the effect of changes of manufacturing conditions on the results of detection. Besides these, the arithmetic is simple, and it is carried out real – time for its small time of calculating.

Key words: Chatter, Current signal, Detection, Milling

CLC Number:

TH161.6

Liu Xiaosheng;Wu Lenan;Ma Yulin;Cai Hegao. STUDY ON DETECTION OF CHATTER FOR MILLING BASED ON CURRENT SIGNAL[J]. , 2000, 36(4): 25-29.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2000/V36/I4/25

[1]	XIE Jingshuo, LIU Hui, HAN Lijin, LIU Baoshuai, XIANG Changle, REN Xiaolei. Research on External Disturbance Rejection Double Closed-loop Control Method of Wheel-legged Mobile Platform [J]. Journal of Mechanical Engineering, 2026, 62(7): 196-207.
[2]	XIA Ziwen, SHAN Chenwei, ZHANG Mengmeng, LIU Wengang, CUI Minchao, LUO Ming. Influence of Elliptical Ultrasonic Vibration Milling on Cutting Characteristics and Subsurface Mechanical Properties of GH4169 [J]. Journal of Mechanical Engineering, 2026, 62(7): 439-451.
[3]	SHI Wentian, LI Jianing, MA Tong, LI Jie, LU Xiaohong, LI Jian, YANG Yilin, WANG Lin. Comparative Test Study of Milling and Drilling of Al/FRP Co-curing Materials [J]. Journal of Mechanical Engineering, 2026, 62(7): 478-490.
[4]	DENG Jiadong, GUAN Shanyue, WANG Xiaokai, QIAN Dongsheng, LIU Chao, LIU Wei, HUA Lin. Development and Application of Network Collaborative and Intelligent Ring Rolling Technology for High-end Equipment Large Rings [J]. Journal of Mechanical Engineering, 2026, 62(6): 65-86.
[5]	XU Yanghuan, WANG Dongcheng, LIU Hongmin, DANG Liying, LIU Yunfei, YANG Aimin. Research on Image Flatness Detection Method Based on Deep Learning [J]. Journal of Mechanical Engineering, 2026, 62(6): 185-196.
[6]	SHI Yingjie, XU Ke, LEI Tairan, ZHANG Yi. Stress Detection Method for Steel Plates Using Shear Wave Birefringence with Electromagnetic Acoustic Transducer [J]. Journal of Mechanical Engineering, 2026, 62(6): 257-266.
[7]	ZHAO You, ZHAO Yulong, GUO Xinliang, WANG Jianjun, CAI Yongkang, CHEN Zhaoxiang, GUO Zhenfei. Research on High Precision Clamping Force Sensor for Intelligent Fixture [J]. Journal of Mechanical Engineering, 2026, 62(4): 52-60.
[8]	ZHOU Ping, ZHOU Gongbo, WANG Hanyu, WANG Pan, YAN Xiaodong, LI Yuanbo. Novel Infrared Visual Detection Method for Surface Defects of Steel Wire Rope Using Eddy Current Thermal Imaging [J]. Journal of Mechanical Engineering, 2026, 62(4): 86-97.
[9]	ZHONG Qi, HUANG Yi, XU Enguang, WANG Junxian, MAO Yongxin, HE Xianjian, WANG Jun, YANG Huayong. Dynamic Performance Detection Method for High Speed on/off Valve Based on the Multi-order Derivative Characteristic of the Current [J]. Journal of Mechanical Engineering, 2026, 62(4): 366-376.
[10]	WANG Dongqian, SUN Yiwen, XING Yanming, ZHANG Xin, CAI Yonglin, ZHANG Lei, LIANG Zhiqiang. Research on a Self-inductive Smart Tool holder System for Temperature-Vibration Collaborative Measurement Based on a Halbach Array [J]. Journal of Mechanical Engineering, 2026, 62(2): 35-47.
[11]	PAN Qinxue, ZHAO Guangyuan, YU Haoshen, XU Jiaqi. Research on Stress Detection Method of Carbon Fiber Composites Based on Critical Refraction Longitudinal Wave [J]. Journal of Mechanical Engineering, 2026, 62(2): 48-60.
[12]	LIU Zheng, ZHANG Ze, ZHANG Jiajun, XIE Fugui, LIU Xinjun. Chatter Stability Domain Analysis and Milling Verification for a Mobile Hybrid Robot in Aerospace Components Machining [J]. Journal of Mechanical Engineering, 2026, 62(1): 195-203.
[13]	GAO Shuyan, HUANG Mingkun, HUANG Tao, ZHANG Xiaoming, DING Han. Efficient Computation of Cutter-workpiece Engagement and Cutting Force Prediction for General Cutter in Five-axis Machining [J]. Journal of Mechanical Engineering, 2025, 61(9): 132-141.
[14]	HE Chaojiang, LI Peng, HE Cunfu, WANG Yujue, LIU Xiucheng. High-sensitive Magnetic Field Sensor Based on Terfenol-D and Fiber Bragg Grating [J]. Journal of Mechanical Engineering, 2025, 61(8): 1-8.
[15]	SHAN Liuhao, LI Yixin, YAO Yuanji, FU Tongqiang, YANG Qian, TANG Long, HU Qiao. Optimization Design and Experimental Study of Underwater Artificial Lateral Line Sensor Arrays [J]. Journal of Mechanical Engineering, 2025, 61(8): 32-46.

STUDY ON DETECTION OF CHATTER FOR MILLING BASED ON CURRENT SIGNAL

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments