Study on the Performance of YunXi Environment Friendly Molding Sand

doi:10.3901/JME.2016.06.092

Abstract

Abstract: YunXi environment friendly molding sand has been successfully used in sand casting process, it can effectively reduce burning-on, scab, sand inclusion, blowhole and other defects. It helps to improve the internal quality and visual quality of casting. YunXi environment friendly molding sand casting process has comprehensive advantages of environment friendly, economic, high-quality and high-efficient. A series of experiments are carried out, which helps to further understand the characteristics of YunXi environment friendly molding sand and the effects of molding sand performance on the casting defects and casting quality. The wet compressive strength, permeability, hot wet tensile strength, gas evolution, thermal expansion, hot pressing strength, high temperature form transformation, differential scanning calorimetry-Thermogravimetric analysis(DSC-TG) curve of YunXi environment friendly molding sand are systematically studied, and which are compared with that of the conventional coal sand. The result shows that the wet compressive strength, permeability, thermal expansion of YunXi environment friendly molding sand are similar with coal sand, but the hot wet tensile strength, hot pressing strength, gas evolution of YunXi environment friendly molding sand are far superior to that of coal sand. These advantages can effectively reduce the casting defects, and ensure the quality of the casting. Research work can helps to further improve the casting quality and further promote the production process of green casting.

Key words: casting defects, environment friendly molding sand, green casting, molding sand performance

CLC Number:

TG221

ZHU Shigen, TAO Liyang, LUO Yilan, DING Hao. Study on the Performance of YunXi Environment Friendly Molding Sand[J]. Journal of Mechanical Engineering, 2016, 52(6): 92-98.

References

[1] 吴继忠. 中国铸造业的环保问题[J]. 铸造,2009,58(10)：1038-1040.
WU Jizhong. Environmental protection of China foundry industry[J]. Foundry,2009,58(10)：1038-1040.
[2] 石德全. 造型材料[M]. 北京：北京大学出版社,2009.
SHI Dequan. Molding material[M]. Beijing：Peking University Press,2009.
[3] 宗倩,朱世根,骆祎岚,等. 黄壤土天然粘土砂湿型铸造工艺的应用研究[J]. 铸造,2009,58(7)：721-725.
ZONG Qian,ZHU Shigen,LUO Yilan,et al. Application of green sand casting process of yellow loam natural clay-bonded sand[J]. Foundry,2009,58(7)：721-725.
[4] 李元元,陈维平,黄丹,等. 铸造行业的节能减排现状及对策分析[J]. 铸造,2010,59(11)：1141-1147.
LI Yuanyuan,CHEN Weiping,HUANG Dan,et al. Energy conservation and emissions reduction and strategy involved in foundry industry[J]. Foundry,2010,59(11)：1141-1147.
[5] 桑小龙,朱世根,骆祎岚,等. 防止铸钢粘砂的黄壤土型砂性能与工艺研究[J]. 机械工程学报,2012,48(14)：64-69.
SANG Xiaolong,ZHU Shigen,LUO Yilan,et al. Influence of sintering behavior of natural clay-bonded sand on surface quality of steel castings[J]. Journal of Mechanical Engineering,2012,48(14)：64-69.
[6] 袁怀鹏,朱世根,骆祎岚,等. 黄壤土天然粘土砂湿型铸造工艺对铸铁件壁厚的适应性[J]. 铸造,2009,58(5)：498-501.
YUAN Huaipeng,ZHU Shigen,LUO Yilan,et al. Adaptability of natural yellow loam clay-bonded sand casting process to thickness of iron casting[J]. Foundry,2009,58(5)：498-501.
[7] 张锐,骆祎岚,殷梁,等. 黄壤土砂铸型与铸件界面烧结层的力学行为[J]. 机械工程学报,2011,47(2)：90-94.
ZHANG Rui,LUO Yilan,YIN Liang,et al. Mechanical property of the sintering layer at the interface of natural yellow clay-bonded sand mould and iron casting[J]. Journal of Mechanical Engineering,2011,47(2)：90-94.
[8] 杨振刚,朱世根,骆祎岚,等. 天然粘土砂烧结对铸铁件表面质量的影响[J]. 机械工程学报,2010,46(12)：65-69.
YANG Zhengang,ZHU Shigen,LUO Yilan,et al. Influence of sintering behaviour of natural clay sand on surface quality of iron casting[J]. Journal of Mechanical Engineering,2010,46(12)：65-69.
[9] 胡彭生. 型砂[M]. 上海：上海科学技术出版社,1994.
HU Pengsheng. Moulding sand[M]. Shanghai：Shanghai Science and Technology Press,1994.
[10] 林宗寿. 无机非金属材料工学[M]. 武汉：武汉理工大学出版社,2006.
LIN Zongshou. Process technology for inorganic non-metallic materials[M]. Wuhan：Wuhan University of Technology Press,2006.