Investigation on Proton Exchange Membrane Fuel Cell Stacks of Domestic Key Materials and Components

Abstract

Abstract: According to the technical and application demands of the proton exchange membrane fuel cell (PEMFC), the key materials and components, including the catalyst, composite proton exchange membrane, carbon paper, and bipolar plate, are characterized and stack developed. The results show that these materials and components attain the technical level of the import products and suffice for fuel cell vehicle technologies. Presently, the composite proton exchange membrane is mass produced, the capability of mass production of carbon paper and catalyst is also ready, and mass production process and equipment for thin stainless steel bipolar plate has entered development phase. The performance assessment of these materials and components in PEMFC vehicle engine is being implemented. According to the preliminary estimate, the application of these materials and components will reduce the cost of PEMFC stacks by about 50% and improve the performance, which lays the foundation for promoting the practical application of domestic fuel cell products.

Key words: Bipolar plate, Carbon paper, Catalyst, Fuel cell, Homemade, Proton exchange membrane

CLC Number:

TM911.4

XING Danmin;HOU Zhongjun;YAN Xiqiang;SONG Shufan;FU Yunfeng;ZHAO Enjie;MING Pingwen. Investigation on Proton Exchange Membrane Fuel Cell Stacks of Domestic Key Materials and Components[J]. , 2010, 46(6): 16-20.

[1]	KE Yuzhi, YUAN Wei, ZHANG Shaopeng, ZHOU Feikun, LU Liang, TANG Yong. Study on Thermo-mechanical Coupling Characteristics of Hot Pressing on Surface Microstructures of Proton Exchange Membrane for Fuel Cells [J]. Journal of Mechanical Engineering, 2024, 60(14): 317-328.
[2]	LI Hao, BIN Yang, HU Jie, YUE Xiao, JIN Tingan, ZHANG Kai. Offset-free Explicit Model Predictive Control and Its Application on the Net Output Power Tracking of PEMFC System [J]. Journal of Mechanical Engineering, 2024, 60(14): 282-297.
[3]	WEI Xiao-dong, SUN Chao, LIU Bo, HUO Wei-wei, REN Qiang, SUN Feng-chun. Co-optimization of Vehicle Speed and Energy for Fuel Cell Vehicles [J]. Journal of Mechanical Engineering, 2023, 59(8): 204-212.
[4]	GAO Fengyang, ZHANG Haoran. Adaptive Instantaneous Equivalent Energy Consumption Optimization of Jydrogen Fuel Cell Hybrid Electric Tram [J]. Journal of Mechanical Engineering, 2023, 59(6): 226-238.
[5]	WANG Jiulong, WU Xiaogang. Quasi-Z Source DC-DC Converter with Wide Step-up/step-down Range for Fuel Cell Vehicles [J]. Journal of Mechanical Engineering, 2023, 59(16): 325-341.
[6]	ZHAO Anxin, ZHANG Zhisheng. Low-carbon Economic Dispatch of Integrated Energy System Considering Integrated Power Demand Response [J]. Journal of Electrical Engineering, 2022, 17(4): 226-232.
[7]	HAO Hong, XU Jun. Synthesis of Self-supported CC/NiS₂ Nanosheet as an Interlayer and Its Performance Research of Lithium-sulfur Battery [J]. Journal of Electrical Engineering, 2022, 17(3): 12-18.
[8]	SUN Yu-ning, MAO Lei, HUANG Wei-guo, ZHANG Heng, LU Shou-xiang. Fault Diagnosis of Proton Exchange Membrane Fuel Cell Using Magnetic Field Data [J]. Journal of Mechanical Engineering, 2022, 58(22): 106-114.
[9]	LIU Qing-shan, LAN Feng-chong, CHEN Ji-qing, CENG Chang-jing, WANG Jun-feng. Effect of Pore Characteristics and Anisotropy of Porous Layer on the Transient Performance of Fuel Cell [J]. Journal of Mechanical Engineering, 2022, 58(22): 90-105.
[10]	ZHANG Li-bin, LIU Shuai, WANG Zhong, LI Rui-na, ZHANG Qi-xia. Influence of Novel Channel in Fuel Cell on Water Removal from Gas Diffusion Layer Surface [J]. Journal of Mechanical Engineering, 2022, 58(22): 79-89.
[11]	XIONG Wanli, WANG Jian, CHEN Zhenyu, SUN Wenbiao, XUE Hainan, TANG Xiuqing. Review of Research Status and Development of Foil Air Bearings [J]. Journal of Mechanical Engineering, 2022, 58(21): 92-113.
[12]	ZHANG Fulin, HE Jianguo, LIU Yang, DAI Shoujun, XIE Yuying, HUANG Chao, FAN Lianwen, LIU Sisi. Investigations on Pulsed Laser Ablation and Incubation Effect in the Composite of Resin and Graphite [J]. Journal of Mechanical Engineering, 2022, 58(15): 302-312.
[13]	ZHANG Han, YANG Jibin, ZHANG Jiye, XU Xiaohui. Cooperative Optimization for Fuel Cell Tram Energy Management and Speed Profile [J]. Journal of Mechanical Engineering, 2022, 58(10): 169-179.
[14]	LIN Kaijie, DONG Weisong, GU Dongdong, QUAN Jingfeng, QIAO Jingchi, WANG Chaochao. Effect of Laser Powder Bed Fusion Process Parameters on Performance of 316L Stainless Steel Bipolar Plates [J]. Journal of Mechanical Engineering, 2021, 57(9): 167-174.
[15]	ZHOU Wei, ZHU Xinning, LIAN Yunsong, YOU Changtang. Research Progress on Three-dimensional Flow Field Technology of Proton Exchange Membrane Fuel Cell [J]. Journal of Mechanical Engineering, 2021, 57(8): 2-12.

Investigation on Proton Exchange Membrane Fuel Cell Stacks of Domestic Key Materials and Components

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments