NUMERIC CHARACTER ANALYSIS OF THE CLASSIFICATION CODES OF MACHINE PARTS

Abstract

Abstract: A quantificational analysis technique is presented for classification codes of machine parts. The mathematics models are established to describe the distribution, equilibrium, independence of code value and the relative distribution, degree of association between two codes. Data come from experimentation compose a sample. Every performance value of the sample data is calculated with the mathematics models. The performance values reflect the whole and local status of the sample.

Key words: Classification code, Degree of association, Equilibrium, Independence, Relative distribution

CLC Number:

TH166

Li Lingfeng. NUMERIC CHARACTER ANALYSIS OF THE CLASSIFICATION CODES OF MACHINE PARTS[J]. , 2002, 38(11): 100-104.

[1]	ZHU Libin, WANG Ying, NIE Shuaishuai, HUANG Haihong, LIU Zhifeng. Thermal Equilibrium Research of Supercritical CO₂ Assisted Cutting Process Based on Mass Flow Optimization [J]. Journal of Mechanical Engineering, 2024, 60(19): 367-376.
[2]	ZANG Yong, CAI Yingfeng, SUN Xiaoqiang, XU Xing, CHEN Long, WANG Hai. Research on Intelligent Vehicle Trajectory Tracking Coordination Control Method Based on Extension Game [J]. Journal of Mechanical Engineering, 2022, 58(8): 181-194.
[3]	CHEN Yanxiang, JIANG Zhigang, ZHU Shuo, ZHANG Hua. Research on Reassembly Strategy of Used Mechanical Equipment Components Based on Non-cooperative Game [J]. Journal of Mechanical Engineering, 2021, 57(9): 203-212.
[4]	ZHANG Yayu, SUN Shouguang, WANG Binjie, YIN Zhenkun, LI Qiuze, WANG Wenjing. Study on the Classification and Verification of Bogie Frame Loads of the High-speed EMU [J]. Journal of Mechanical Engineering, 2021, 57(6): 156-163.
[5]	ZHAO Feifei, CAO Kaituo, BAO Hong, GAO Guoming. Deformation Field Reconstruction of Timoshenko Beam and Optimization of Sensor Placement [J]. Journal of Mechanical Engineering, 2020, 56(20): 1-11.
[6]	KOU Jie, ZHANG Jimin, ZHOU Hechao, WANG Chengping. Wheel Wear of Intercity EMU at Non-equilibrium Speed on Curves [J]. Journal of Mechanical Engineering, 2020, 56(16): 137-146.
[7]	ZHANG Ning, LI Tian, MA Jian, YIN Guodong, ZHU Weigang, OUYANG Tiancheng. Nonlinear Dynamics Analysis of the Body Sway of Car-trailer Combinations [J]. Journal of Mechanical Engineering, 2019, 55(24): 127-136.
[8]	XIE Zhiqiang, YU Jie, CHEN Deyun, YANG Jing. Integrated Scheduling Algorithm of Two Workshops Based on the Principle of the Neighborhood Rendering [J]. Journal of Mechanical Engineering, 2016, 52(1): 149-159.
[9]	Yifei Luo, Fei Xiao, Bo Wang, and Binli Liu. Failure Analysis of Power Electronic Devices and Their Applications under Extreme Conditions [J]. Chinese Journal of Electrical Engineering, 2016, 2(1): 91-100.
[10]	MA Yajing, DU Jingli, DUAN Baoyan, YANG Dongwu. A Method to Design the Initial Equilibrium State of Spaceborne Cable-net Antenna Considering the Flexibility of Supporting Trusses [J]. Journal of Mechanical Engineering, 2015, 51(17): 114-119.
[11]	ZHANG Hao;SHI Zhanqun;ZHANG Shunxin;YAO Linan;SONG Zhongyue. A Theoretical Investigation on Starved Lubricating Characteristics of the Floating Ring Bearing Based on Jakobsson-Floberg-Olsson Boundary Condition [J]. , 2014, 50(9): 100-107.
[12]	WANG Xianbin;SHI Shuming;LIU Li;JIN Lisheng. Vehicle Dynamics Equilibriums Solution Search Based on Hybridization of Genetic Algorithm and Quasi-Newton Method [J]. , 2014, 50(4): 120-127.
[13]	WANG Meiqi; LIU Bin; WEN Yan; LIU Haoran. Seepage Heat Transfer Model and Numerical Simulation of Grate Cooler [J]. , 2014, 50(24): 152-157.
[14]	REN Hong;HE Qiang;HU Xiangtao;LI Zicheng. Study on Loosening Earth Pressure in Sandy Ground for Shield Tunneling [J]. , 2014, 50(21): 17-22.
[15]	DENG Xiaolei;FU Jianzhong;XIA Chenhui;FU Guoqiang;CHEN　Zichen. Multi-objective Correction Method for Thermal Model Parameters of CNC Machine Tool Spindle System [J]. , 2014, 50(15): 119-126.

NUMERIC CHARACTER ANALYSIS OF THE CLASSIFICATION CODES OF MACHINE PARTS

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments