Research on High Precision Clamping Force Sensor for Intelligent Fixture

doi:10.3901/JME.260105

Abstract

Abstract: In precision machining, the stability and reliability of workpiece clamping by machine tool fixtures directly influence the surface quality and dimensional accuracy of the machined parts. To enable online measurement of the magnitude and dynamic variations of clamping force during machining, a design and manufacturing method for an intelligent fixture with embedded clamping force sensor based on piezoresistive force-sensing chips is proposed. The intelligent fixture incorporates internally packaged clamping force sensors, which utilize the fixture’s tie rod as an elastic sensitive element. Piezoresistive force-sensing chips are bonded to the tie rod to perceive the tensile force, and this tensile force is converted into clamping force according to the internal structural relationships of the intelligent fixture. Theoretical calculations and finite element simulations are employed to analyze the tie rod strength, sensor natural frequency, and the conversion relationship between clamping force and tie rod tension. Components of the intelligent fixture are manufactured, and integration of the clamping force sensor with the fixture is achieved through embedded packaging techniques. Comprehensive performance metrics of the sensor are investigated through static and dynamic performance tests. The developed clamping force sensor exhibits a linearity of -0.31% FS, hysteresis of 0.39% FS, and repeatability of 0.18% FS. Its mounted natural frequency reaches 154 Hz, corresponding to an applicable maximum machine tool spindle speed of 6 930 r/min. The developed intelligent fixture-integrated clamping force sensor demonstrates excellent static and dynamic characteristics, fulfilling the requirements for online and dynamic monitoring of workpiece clamping force in precision machining applications.

Key words: intelligent fixture, clamping force sensor, online, dynamic detection

CLC Number:

TH823

ZHAO You, ZHAO Yulong, GUO Xinliang, WANG Jianjun, CAI Yongkang, CHEN Zhaoxiang, GUO Zhenfei. Research on High Precision Clamping Force Sensor for Intelligent Fixture[J]. Journal of Mechanical Engineering, 2026, 62(4): 52-60.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.260105

http://www.cjmenet.com.cn/EN/Y2026/V62/I4/52

References

[1] 陈冰，杨宝通，牛智炀，等. 面向航空发动机薄壁零件加工的自适应夹具设计现状与进展[J]. 航空制造技术，2019，62(7)：14-24. CHEN Bing，YANG Baotong，NIU Zhiyang，et al. Adaptive fixture designing of thin-walled aero-engine workpiece：a survey of the state of art[J]. Aeronautical Manufacturing Technology，2019，62(7)：14-24.
[2] 吴宝海，郑志阳，张阳，等. 面向薄壁零件加工变形与振动控制的智能装夹技术研究进展[J]. 机械工程学报，2021，57(17)：21-34. WU Baohai，ZHENG Zhiyang，ZHANG Yang，et al. Intelligent clamping technology for machining deformation and vibration control of thin-wall parts：A review of recent progress [J]. Journal of Mechanical Engineering，2021，57(17)：21-34.
[3] 吴明阳，张亚利，程耀楠，等. 高压冷却下PCBN刀具切削高温合金表面残余应力分析及变质层成形机理[J]. 机械工程学报，2022，58(1)：231-243. WU Mingyang，ZHANG Yali，CHENG Yaonan，et al. Analysis of surface residual stress and formation mechanism of metamorphic layer in PCBN tool cutting superalloy under high-pressure cooling [J]. Journal of Mechanical Engineering，2022，58(1)：231-243.
[4] 胡炳涛，钟锐锐，冯毅雄，等. 人-信息-物理互联环境下数字车间制造能力建模与自适应调度[J]. 机械工程学报，2025，61(3)：23-39. HU Bingtao，ZHONG Ruirui，FENG Yixiong，et al. Digital shop floor manufacturing capability modeling and adaptive scheduling in human-cyber-physical interconnected environment[J]. Journal of Mechanical Engineering，2025，61(3)：23-39.
[5] LI E M，ZHOU J T，YANG C S，et al. Clamping force prediction based on deep spatio-temporal network for machining process of deformable parts[J]. Scientific Reports，2023，13(1)：7012-7028.
[6] LIU D S，HU Y，ZHANG D H，et al. Milling force monitoring with thin-film sensors integrated into fixtures[J]. The International Journal of Advanced Manufacturing Technology，2019，103(1-4)： 1519-1527.
[7] SUN W Y，LUO M，ZHANG D H. Machining vibration monitoring based on dynamic clamping force measuring in thin-walled components milling[J]. The International Journal of Advanced Manufacturing Technology，2020，107(5-6)：2211-2226.
[8] 王岩松，张国斌，闫培龙，等. 高速旋转卡盘夹持力测试仪的研制[J]. 内蒙古科技与经济，2014(20)：100-101. WANG Yansong，ZHANG Guobin，YAN Peilong，et al. Development of a high-speed rotating chuck clamping force tester[J]. Inner Mongolia Science Technology & Economy，2014(20)：100-101.
[9] 于常安，解志军，贾琦，等. 一种夹持力传感器的研制[J]. 传感器世界，2017，23(1)：14-18. YU Changan，XIE Zhijun，JIA Qi，et al. Development of a clamping force sensor [J]. Sensor World，2017， 23(1)：14-18.
[10] 姜培，李毅，王慧忠. 一种楔形液压动力三爪卡盘静态夹持力测量仪的设计与应用[J]. 制造技术与机床， 2020(10)：124-125. JIANG Pei，LI Yi，WANG Huizhong. Analysis of a static clamping force easuring device for wedge-shaped hydraulic ower three-jaw chuck[J]. Manufacturing Technology & Machine Tool，2020(10)：124-125.
[11] 杭州标质技术检测有限公司. 一种三爪卡盘夹持力测量装置：中国，202311660253.7[P]. 2024-03-01. Hangzhou BiaoZhi Technology Testing Co., Ltd. A three jaw chuck clamping force measuring device：China，202311660253.7[P]. 2024-03-01.
[12] 郑路，李兴山，荀浩，等. 碳纤维复合材料加工中爪式卡盘夹持力的测量问题[J]. 成组技术与生产现代化， 2022，39(2)：54-58. ZHENG Lu，LI Xingshan，XUN Hao，et al. Measurement and test of clamping force of jaw chuck in carbon fiber composites processing [J]. Group Technology & Production Modernization，2022，39(2)：54-58.
[13] 贾梦，薛丁睿，刘思凡，等. 动力卡盘动态夹持力测试系统研制[J]. 机械制造与自动化，2022，51(1)： 229-233. JIA Meng，XUE Dingrui，LIU Sifan，et al. Development of clamping force test system for powerchuck[J]. Machine Building & Automation，2022，51(1)：229-233.
[14] ESTREMS M，ARIZMENDI M，CUMBICUS W E，et al. Measurement of clamping forces in a 3 jaw chuck through an instrumented aluminium ring[J]. Procedia Engineering，2015，132：456-463.
[15] PAUL S，SHIN H，CHANG J，et al. Chucking system with built-in sensor unit for gripping force monitoring in high force electromechanical actuator[J]. IEEE Transactions on Industrial Informatics，2024，20(9)：10738-10749.
[16] MÖHRING H，GUTSCHE D. Sensory chuck jaw for enhancing accuracy in turning thin‐walled parts[J]. CIRP Annals，2024，73(1)：285-288.
[17] 成大先. 机械设计手册[M]. 北京：化学工业出版社. 2008. CHENG Daxian. Handbook of mechanical design [M]. Beijing：Chemical Industry Press，2008.
[18] 秦大同，谢里阳. 现代机械设计手册[M]. 北京：化学工业出版社，2011. QIN Datong，XIE Liyang. Modern handbook of mechanical design [M]. Beijing：Chemical Industry Press，2011.
[19] 罗伯特•诺顿. 机械设计综合方法[M]. 黄平，李静荣，翟敬梅，译. 北京：机械工业出版社，2016. ROBERT N. Machine design：an integrated approach [M]. Translated by HUANG Ping，LI Jingrong，ZHAI Jingmei. Beijing：China Machine Press，2016.
[20] 孙志礼，闫玉涛，田万禄. 机械设计[M]. 北京：科学出版社，2015. SUN Zhili，YAN Yutao，TIAN Wanlu. Machine design [M]. Beijing：Science Press，2015.
[21] 濮良贵，陈国定，吴立言. 机械设计[M]. 北京：高等教育出版社，2019. PU Lianggui，CHEN Guoding，WU Liyan. Machine design [M]. Beijing：Higher Education Press，2019.
[22] 张义民. 机械振动学基础[M]. 北京：高等教育出版社，2020. ZHANG Yimin. Fundamentals of mechanical vibration[M]. Beijing：Higher Education Press，2020.