Research on Dynamic Response Characteristics of Low Power Digital Valve Based on Response Surface Method

doi:10.3901/JME.2025.12.344

Abstract

Abstract: Aiming at the problems of highly pressure-affected opening and closing time, complex driving method, high energy consumption, and slow response of traditional digital valves under the current driving method. Based on the design of a new low-power digital valve, a low-power digital valve driving parameter matching method considered the response surface method is proposed, which improves dynamic characteristics while ensuring low power consumption. By establishing the dynamic model of the low-power digital valve, the influence of working pressure and driving parameters on the response time is analyzed. Using the response surface method, the prediction model of opening and closing response time is constructed, and the matching relationship between driving parameters and working pressure is obtained with the response time of 1 ms as the target. Finally, a low-power digital valve test platform is built to verify the accuracy of the dynamic model and the effectiveness of the driving parameter matching method. The test results show that the maximum response time of opening and closing is 1.08 ms and 1.09 ms, and the shortest response time is 1.06 ms and 1.07 ms, the rate of change is all less than 2%, within the range of 3-19 MPa working pressure. The matching drive parameters effectively improve the dynamic characteristics of the valve and its stability under variable pressure conditions, and the valve temperature is maintained at about 80 ℃ after a long time. The low power consumption effect is obvious.

Key words: low power consumption, digital valve, response time, dynamic characteristics, response surface method

CLC Number:

TH137

YANG Shuai, YAO Jing, WEI Tengfei, ZHANG Pengyuan, WANG Yunchang, YIN Hang, QIU Mingjun. Research on Dynamic Response Characteristics of Low Power Digital Valve Based on Response Surface Method[J]. Journal of Mechanical Engineering, 2025, 61(12): 344-355.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2025.12.344

http://www.cjmenet.com.cn/EN/Y2025/V61/I12/344

References

[1] LINJAMA M. Digital fluid power: state of the art[C]// Proceedings of the 12th Scandinavian International Conference on Fluid Power，May 18-20，2011，Tampere，Finland. 2011：18-20.
[2] 路甬祥，李运华，陈建涛. 新挑战，新机遇，新贡献-未来流体动力技术的展望与期盼[J]. 液压气动与密封，2009，29(4)：1-3. LU Yongxiang，LI Yunhua，CHEN Jiantao. New challenges，new chances，new contributions-a look forward to the future of fluid power technology[J]. Hydropneumatic and Sealing，2009，29(4)：1-3.
[3] 杨华勇，王双，张斌，等. 数字液压阀及其阀控系统发展和展望[J]. 吉林大学学报：工学版，2016，46(5)：1494-1505. YANG Huayong，WANG Shuang，ZHANG Bin，et al. Development and prospect of digital hydraulic valve and valve control system[J]. Journal of Jilin University：Engineering Edition，2016，46(5)：1494-1505.
[4] WINKLER B. Recent advances in digital hydraulic components and applications[C]// The Ninth Workshop on Digital Fluid Power，September 7-8，2017，Aalborg，Denmark. 2017：1-10.
[5] 许仰曾，陈惟宁. 液压高速开关数字阀及其在各工业领域应用[J]. 液压气动与密封，2012，32(1)：72-77. XU Yangzeng，CHEN Weining. Hydraulic high-speed switching digital valve and its application in various industrial fields[J]. Hydropneumatic and Sealing，2012，32(1)：72-77.
[6] XU Bing，SHEN Jun，LIU Shihao，et al. Research and development of electro-hydraulic control valves oriented to industry 4.0：A Review[J]. Chinese Journal of Mechanical Engineering，2020，33(2)：13-32.
[7] ZHANG Qiongfang，YAN Liang，DUAN Zihao，et al. High torque density torque motor with hybrid magnetization pole arrays for jet pipe servo valve[J]. IEEE Transactions on Industrial Electronics，2019，67(3)：2133-2142.
[8] LI Liyi，ZHANG Chengming，KOU Baoquan，et al. Design of giant magnetostrictive actuator for fuel injector[C]// IEEE Vehicle Power and Propulsion Conference，September 3-5，2008，Harbin，China. 2008：1-4.
[9] UUSITALO J P，AHOLA V，SOEDERLUND L，et al. Novel bistable hammer valve for digital hydraulics[J]. International Journal of Fluid Power，2010，11(3)：35-44.
[10] WU Shuai，ZHAO Xiangyu，LI Chunfang，et al. Multiobjective optimization of a hollow plunger type solenoid for high speed on/off valve[J]. IEEE Transactions on Industrial Electronics，2017，65(4)：3115-3124.
[11] 阮键，裴翔. 2D电液数字换向阀[J]. 机械工程学报，2000，36(3)：86-89. RUAN Jian，PEI Xiang. 2D digital directional control valve[J]. Journal of Mechanical Engineering，2000，36(3)：86-89.
[12] 刘宇刚，苏明. 高速电磁开关阀快速关闭方法设计与实现[J]. 自动化与仪表，2018，33(2)：62-64. LIU Yugang，SU Ming. Design and implementation of high-speed solenoid valve rapid closing method[J]. Automation and Instrumentation，2018，33(2)：62-64.
[13] LEE I Y. Switching response improvement of a high speed on/off solenoid valve by using a 3 power source type valve driving circuit[C]// IEEE International Conference on Industrial Technology，December 15-17，2006，Mumbai，India：IEEE，2006：1823-1825.
[14] FLORIAN M，RUDOLF S. Development and experimental results of a small fast switching valve derived from fuel injection technology[C]// Proceedings of the 8th Workshop on Digital Fluid Power，May 24-25，2016，Tampere，Finland. 2016：9-26.
[15] 高强，朱玉川，罗樟，等. 高速开关阀的复合PWM控制策略分析与优化[J]. 北京航空航天大学学报，2019，45(6)：1129-1136. GAO Qiang，ZHU Yuchuan，LUO Zhang，et al. Analysis and optimization on compound PWM control strategy of high-speed on/off valve[J]. Journal of Beijing University of Aeronautics and Astronautics，2019，45(6)：1129-1136.
[16] CHENG Qiang，ZHANG Zhendong，XIE Nailiu. Power losses analysis of the gasoline direct injector within different driven strategies[J]. International Journal of Applied Electromagnetics and Mechanics，2016，50(3)：379-394.
[17] MACH F，KURFIŘT M，DOLEŽEL I. Bistable fully electromagnetic valve for high-speed and fail-safe operations[J]. IEEE Transactions on Industrial Electronics，2017，66(1)：349-357.
[18] 钟麒，张斌，洪昊岑，等. 基于电流反馈的高速开关阀3电压激励控制策略[J]. 浙江大学学报(工学版)，2018， 52(1)：8-15. ZHONG Qi，ZHANG Bin，HONG Haocen，et al. Three power sources excitation control strategy of high-speed on/off valve based on current feedback[J]. Journal of Zhejiang University (Engineering Edition)，2018，52(1)：8-15.
[19] 钟麒，何贤剑，李研彪，等. 自适应供油压力变化的高速开关阀控制策略研究[J]. 机械工程学报，2021，57(6)：224-235. ZHONG Qi，HE Xianjian，LI Yanbiao，et al. Research on control algorithm for high-speed on/off valves that adaptive to supply pressure changes[J]. Journal of Mechanical Engineering，2021，57(6)：224-235.
[20] GAO Qiang，ZHU Yuchuan，WU Changwen，et al. Identification of critical moving characteristics in high speed on/off valve based on time derivative of the coil current[J]. Journal of Systems and Control Engineering，2021，235(7)：1084-1099.
[21] ZHONG Qi，ZHANG Bin，YANG Huayong，et al. Performance analysis of a high-speed on/off valve based on an intelligent pulse width modulation control[J]. Advances in Mechanical Engineering，2017，9(11)：1-11.