Vibration Damping of Subway Resilient Wheel on Fastening Clips in Rail Corrugation Section

doi:10.3901/JME.2025.08.240

Abstract

Abstract: The resonance of the fastening clips stimulated by the short-wavelength rail corrugation is an important cause of the fatigue fracture of the fastening clips in subway track. The resilient wheel is a new type of vibration damping wheel, and its damping effect on the fastening clips is not clear. Based on the finite element model of wheel-rail-fastener and the linear theory of cumulative fatigue damage in conjunction with field tests, the vibration damping effect of subway resilient wheels on fasteners in the corrugated section is investigated. The results show that the vibration acceleration of fastening clips is reduced by about 50% compared with the conventional wheel when the resilient wheel rolls over a corrugated rail with wavelength of 31.5 mm and at a speed of 70 km/h. The resilient wheel reduces the wheel-rail impact energy caused by rail corrugation, which is an important reason for the vibration damping effect of the fastening clips when the resilient wheel is used. For the short-wavelength corrugation section of the subway, the fatigue life of the fastening clips when using the resilient wheel is increased by about 375% than that when using the conventional wheel, which can effectively reduce the fatigue damage of the fastening clips. The research results provide scientific support for the optimization design of the resilient wheel and the maintenance of subway track.

Key words: resilient wheel, short wave-length corrugation, fastening clips, resonance, fatigue failure

CLC Number:

U211

FU Haoning, GUAN Qinghua, WANG Peng, WEN Zefeng. Vibration Damping of Subway Resilient Wheel on Fastening Clips in Rail Corrugation Section[J]. Journal of Mechanical Engineering, 2025, 61(8): 240-249.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2025.08.240

http://www.cjmenet.com.cn/EN/Y2025/V61/I8/240

References

[1] 金学松，李霞，李伟，等. 铁路钢轨波浪形磨损研究进展[J]. 西南交通大学学报，2016，51(2)：264-273. JING Xuesong，LI Xia，LI Wei，et al. Review of rail corrugation progress[J]. Journal of Southwest Jiaotong University，2016，51(2)：264-273.
[2] 温泽峰. 钢轨波浪形磨损研究[D]. 成都：西南交通大学，2006. WEN Zefeng. Study on rail corrugation[D]. Chengdu：Southwest Jiaotong University，2006.
[3] 关庆华，张斌，熊嘉阳，等. 地铁钢轨波磨的基本特征、形成机理和治理措施综述[J]. 交通运输工程学报，2021，21(1)：316-337. GUAN Qinghua，ZHANG Bin，XIONG Jiayang，et al. Review on basic characteristics，formation mechanisms，and treatment measures of rail corrugation in metro systems[J]. Journal Traffic and Transportation Engineering，2021，21(1)：316-337.
[4] 范蓉平，孟光，崔银会. 弹性车轮的发展与研究现状[J]. 机车电传动，2005(1)：8-11. FAN Rongping，MENG Guang，CUI Yinhui. Current status of development and study on resilient wheel[J]. Electric Drive for Locomotives，2005(1)：8-11.
[5] 卢祖文. 我国铁路的钢轨扣件[J]. 中国铁路，2005(7)：25-27. LU Zuwen. Rail fasteners for Chinese railways[J]. Chinese Railways，2005(7)：25-27.
[6] 王星欢，何远鹏，张皓迪，等. 压剪复合型弹性车轮对市域桥梁结构噪声的影响[J]. 铁道学报，2023，45(5)：128-135. WANG Xinghuan，HE Yuanpeng，ZHANG Haodi，et al. Effect of press-shear resilient wheels on noise radiated from suburban box-girder bridges[J]. Journal of the China Railway Society，2023，45(5)：128-135.
[7] HE Yuanpeng，ZHOU Qing，XU Fan，et al. An investigation into the effect of rubber design parameters of a resilient wheel on wheel-rail noise[J]. Applied Acoustics，2023，205：109259.
[8] CHEN Zhaowei，PU Qianhua，LONG Quanming，et al. Mechanical characteristics of resilient wheels that consider structural nonlinearity and varying wheel/rail contact point[J]. International Journal of Mechanics and Materials in Design，2023，20(1)：15-33.
[9] ZHOU Xin，LIU Zhi，ZHONG Shuoqiao，et al. In-situ assessment of the sound and vibration reduction performance of a new type of resilient wheel installed on a metro train[J]. Vehicle System Dynamics，2024，62(11)：2936-2955.
[10] CLAUS H，SCHIEHLEN W. Stability analysis of railways with radialelastic wheelsets[J]. Vehicle System Dynamics，2002，37：453-464.
[11] XIAO Guangwen，XU Lei，WU Bing，et al. Dynamic behavior of resilient wheels at a rail weld joint[J]. Proceedings of the Institution of Mechanical Engineers，Part F：Journal of Rail and Rapid Transit，2021，235(8)：925-945.
[12] 尚红霞. 地铁扣件系统静动力分析研究[D]. 成都：西南交通大学，2014. SHANG Hongxia. Static and dynamic analyses of metro fastening system[D]. Chengdu：Southwest Jiaotong University，2014.
[13] XIAO Hong，GUO Xiao，WANG Haoyu，et al. Fatigue damage analysis and life prediction of e-clip in railway fasteners based on ABAQUS and FE-SAFE[J]. Advances in Mechanical Engineering，2018，10(3)：1-12.
[14] YAN Ziquan，SHI Jin，MA Dengke，et al. Experimental and numerical analysis of the static-dynamic characteristics and vibration fatigue failure mechanism of railway fastening clips[J]. International Journal of Rail Transportation，2024，12(3)：414-436.
[15] MA Dengke，SHI Jin，YAN Ziquan，et al. Experimental and numerical investigation of the effect of the assembled state on the static-dynamic characteristics and fatigue performance of railway fastening clips[J]. Structures，2022，46：1808-1822.
[16] XIAO Hong，WANG Jiabin，ZHANG Yanrong. The fractures of e-type fastening clips used in the subway：Theory and experiment[J]. Engineering Failure Analysis，2017，81：57-68.
[17] 朱胜阳，蔡成标，尹镪，等. 高速铁路扣件弹条动力学分析[J]. 工程力学，2013，30(6)：254-258. ZHU Shengyang，CAI Chengbiao，YIN Qiang，et al. Dynamic analysis of rail fastening clip in high-speed railway[J]. Engineering Mechanics，2013，30(6)：254-258.
[18] LING Liang，LI Wei，SHANG Hongxia，et al. Experimental and numerical investigation of the effect of rail corrugation on the behaviour of rail fastenings[J]. Vehicle System Dynamics，2014，52(9)：1211-1231.
[19] CUI Xiaolu，PENG Shuangqian，YU Letian，et al. Fracture mechanism and control method of elastic strip of Cologne-egg fastener in the high-prevalence section of rail corrugation[J]. Engineering Failure Analysis，2023，152：107463.
[20] CUI Xiaolu，BAO Pengyu，LI Tong，et al. Research on the failure mechanism of elastic strip fracture in corrugated sections of metros[J]. Engineering Failure Analysis，2023，143：106837.
[21] 赵鑫，温泽峰，王衡禹，等. 三维高速轮轨瞬态滚动接触有限元模型及其应用[J]. 机械工程学报，2013，49(18)：1-7. ZHAO Xin，WEN Zefeng，WANG Hengyu，et al. 3D Transient finite element model for high-speed wheel-rail rolling contact and its application[J]. Journal of Mechanical Engineering，2013，49(18)：1-7.
[22] 中国铁道科学研究院铁道建筑研究所. Q/CR 563— 2017弹条Ⅰ型扣件[S]. 北京：中国铁路总公司，2017. Railway Engineering Research Institute，China Academy of Railway Sciences Corporation Limited. Q/CR 563—2017 Type Ⅰ fastening system[S]. Beijing：China Railway Corporation，2017.