Influence of Welding Parameters on Formation and Mechanical Properties of Lap Fillet Welded Carbon Steel Joints in Oscillation Laser Welding with Filler Wire

doi:10.3901/JME.2025.02.172

Abstract

Abstract: Based on the oscillation laser welding with filler wire, the effects of laser tilt angle, laser power and welding speed on the surface 3D appearance, macro defects, microstructure and mechanical properties of low carbon steel joints in lap fillet configuration were investigated. The results indicate that the comparatively low laser tilt angle results in incomplete fusion and wedge-shaped notches around the weld root. These defects can be modified by increasing the laser tilt angle, laser power and welding speed, simultaneously. The microstructure in the fusion zone (FZ) is mainly lath martensite, while it is ferrite and pearlite in the heat-affected zone (HAZ) adjacent to the base metal, which contains more pearlite than the base metal. The dominant phases in the HAZ near the FZ are ferrite, martensite and cementite. Narrowed weld width, shortened weld height and significant wedge-shaped notch can cause crack propagation through the FZ, resultantly lead to premature failure, which reflects a severe reduction in energy absorption during the tensile-shear tests. Resultantly, the influence mechanism of laser tilt angle on the weld seam formability, microstructure and mechanical properties of oscillation laser welded joints with filler wire were clarified via the experiment and laser energy distribution calculation. Through the regulation and matching of laser tilt angle, laser power and welding speed, the defect-free weld joints with the same strength as the base metal were obtained.

Key words: oscillation laser welding with filler wire, lap fillet weld, microstructure, mechanical properties, fracture modes

CLC Number:

TG456

WU Guanzhi, CHEN Nannan, SHI Huabing, LIU Kunshan, KONG Liang, WANG Min. Influence of Welding Parameters on Formation and Mechanical Properties of Lap Fillet Welded Carbon Steel Joints in Oscillation Laser Welding with Filler Wire[J]. Journal of Mechanical Engineering, 2025, 61(2): 172-180.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2025.02.172

http://www.cjmenet.com.cn/EN/Y2025/V61/I2/172

References

[1] CHOI D Y，SHARMA A，UHM S H，et al. Liquid metal embrittlement of resistance spot welded 1180 TRIP steel：Effect of electrode force on cracking behavior[J]. Metals and Materials International，2019，25(1)：219-228.
[2] TEHRANI H G，JAFARIAN H R，HEIDARZADEH A，et al. Achieving extraordinary strength and ductility in TRIP steels through stabilization of austenite up to 99.8% by friction stir welding[J]. Materials Science and Engineering：A，2020，773：138876.
[3] LANG Q，ZHANG X，SONG G，et al. Effects of different laser power and welding speed on the microstructure and mechanical properties of TRIP joints in laser-TIG arc hybrid lap filler wire welding[J]. Materials Today Communications，2021，29：102925.
[4] 刘亚姣，刘伟，夏海涛，等. 不锈钢车体板材搭接与对接激光焊接接头的拉伸断裂行为研究[J]. 铁道学报，2014，36(1)：28-33. LIU Yajiao，LIU Wei，XIA Haitao，et al. Fracture behavior and performance of overlap and butt laser welding joints of austenitic stainless steel car body sheets[J]. Journal of the China Railway Society，2014，36(1)：28-33.
[5] 何清和，张月来，曹明慧，等. 轨道车辆碳钢车体长直结构激光-MAG复合焊接工艺[J]. 机车车辆工艺，2023(1)：30-32. HE Qinghe，ZHANG Yuelai，CAO Minghui，et al. Research on laser-MAG composite welding technology for long and straight structure of carbon steel rail vehicle body[J]. Locomotive & Rolling Stock Technology，2023(1)：30-32.
[6] 冯艳鹏，朱加雷，焦向东，等. 车用高强钢激光焊接工艺参数优化[J]. 电焊机，2015，45(10)：30-33. FENG Yanpeng，ZHU Jialei，JIAO Xiangdong，et al. Optimization of parameters of laser welding high strength steel for vehicles[J]. Electric Welding Machine，2015，45(10)：30-33.
[7] 陈俊科，石岩，倪聪，等. 工艺参数对纯镍Ni201激光搭接焊缝成形和力学性能的影响[J]. 应用激光，2015，35(4)：467-471. CHEN Junke，SHI Yan，NI Cong，et al. Effect of welding parameters on formation and mechanical properties of welds during laser lap welding of industrial pure nickel Ni201[J]. Applied Laser，2015，35(4)：467-471.
[8] 张兵宪，张敏，张云龙，等. 工艺参数对304不锈钢薄板激光焊接接头组织及力学性能的影响[J]. 热加工工艺，2021，50(21)：19-24，28. ZHANG Bingxian，ZHANG Min，ZHANG Yunlong，et al. Effect of process parameters on microstructure and mechanical properties of laser welded 304 stainless steel sheet[J]. Hot Working Technology，2021，50(21)：19-24，28.
[9] 赵志博，朱加雷，李桂新，等. 304L不锈钢局部干法水下激光填丝角焊接头的组织及性能[J]. 中国表面工程，2024，37(5)：384-392. ZHAO Zhibo，ZHU Jialei，LI Guixin，et al. Microstructure and properties of 304L stainless steel local dry underwater laser welding joint with filler wire[J]. China Surface Engineering，2024，37(5)：384-392.
[10] THOMAS P V，SAROJA S，ALBERT S K，et al. Microstructural characterization of weld joints of 9Cr reduced activation ferritic martensitic steel fabricated by different joining methods[J]. Materials Characterization，2014，96：213-224.
[11] KHOT RAHUL S，VENKATESWARA R，ABHISHEK K，et al. Investigation on the effect of power and velocity of laser beam welding on the butt weld joint on TRIP steel[J]. Journal of Laser Applications，2020，32(1)：012016.
[12] WANG H，WANG Y，LI X，et al. Influence of assembly gap size on the structure and properties of SUS301L stainless steel laser welded lap joint[J]. Materials，2021，14(4)：996-1011.
[13] 张丽芳，赵泽洋，李坊平，等. 工艺参数对激光填丝搭接焊成形的影响[J]. 应用激光，2015，35(1)：72-76. ZHANG Lifang，ZHAO Zeyang，LI Fangping，et al. Influence of process parameters on the forming of laser lap welding with filler wire[J]. Applied Laser，2015，35(1)：72-76.
[14] 代孝红，郭紫威，王鑫. 基于响应面法的DP800车用高强钢激光-电弧复合焊接焊缝成形研究[J]. 应用激光，2023，43(1)：12-17. DAI Xiaohong，GUO Ziwei，WANG Xin. Study on weld formation of laser-arc hybrid welding of DP800 automotive high strength steel based on response surface method[J]. Applied Laser，2023，43(1)：12-17.
[15] 陈根余，蔡兴，谭力鹏，等. 错边量对车用镀锌钢光纤激光焊接性能的影响[J]. 激光技术，2012，36(5)：577-581. CHEN Genyu，CAI Xing，TAN Lipeng，et al. Effect of align deviation value on fiber laser welding property of automotive galvanized steel[J]. Laser Technology，2012，36(5)：577-581.
[16] 杨晖，李芳，华学明，等. 304L不锈钢扫描激光搭接焊熔池流动与焊缝成形研究[J]. 中国激光，2022，49(22)：75-82. YANG Hui，LI Fang，HUA Xueming，et al. Research on fluid flow of molten pool and bead formation by scanning laser welding in 304L fillet joint[J]. Chinese Journal of Lasers，2022，49(22)：75-82.
[17] 谢小珑，李权洪，母中彦，等. 304不锈钢扫描激光焊接的熔池流动行为及焊缝成形研究[J]. 电焊机，2021，51(1)：42-48. XIE Xiaolong，LI Quanhong，MU Zhongyan，et al. Study on flow behavior and weld forming of 304 stainless steel by scanning laser welding[J]. Electric Welding Machine，2021，51(1)：42-48.
[18] 毕思源，张新瑞，雷正龙，等. 光束摆动方式对2195铝锂合金T型接头双侧激光焊接裂纹的影响[J]. 机械工程学报，2023，59(22)：245-253. BI Siyuan，ZHANG Xinrui，LEl Zhenglong，et al. Influence of beam swing mode on cracks of double-sided laser welding of 2195 aluminum-lithium alloy T-joint[J]. Journal of Mechanical Engineering，2023，59(22)：245-253.
[19] 徐沛礼. 国产A514F钢板与焊丝匹配的探讨[J]. 成组技术与生产现代化，2021，38(1)：53-57. XU Peili. Research on matching between domestic A514F steel plate and welding wire[J]. Group Technology & Production Modernization，2021，51(1)：42-48.
[20] 李少华，尹士科，刘奇凡. 焊接接头强度匹配和焊缝韧性指标综述[J]. 焊接，2008(1)：24-27，69. LI Shaohua，YIN Shike，LIU Qifan. Review on strength matching of welded joint and toughness index of weld[J]. Welding & Joining，2008(1)：24-27，69.
[21] 王芝玲，委福祥，于跟喜. 强度匹配对WELDOX960钢焊接接头组织与性能的影响[J]. 热加工工艺，2014，43(5)：175-177. WANG Zhiling，WEI Fuxiang，YU Genxi. Influence of strength matching on microstructure and mechanical properties of welded joints of WELDOX960[J]. Hot Working Technology，2014，43(5)：175-177.
[22] ZHANG C，LI X，GAO M. Effects of circular oscillating beam on heat transfer and melt flow of laser melting pool[J]. Journal of Materials Research and Technology，2020，9(4)：9271-9282.
[23] JIANG Z，CHEN X，LI H，et al. Grain refinement and laser energy distribution during laser oscillating welding of Invar alloy[J]. Materials & Design，2020，186：108195.