Journal of Mechanical Engineering ›› 2024, Vol. 60 ›› Issue (23): 88-101.doi: 10.3901/JME.2024.23.088
Previous Articles Next Articles
PAN Yuzhen1, WEI Jiawei2, KHAN Rezwan Al Islam2, CHEN Xiong2, WANG Hongbo1, SHANG Huiliang1,2
Received:2023-05-30
Revised:2023-09-04
Online:2024-12-05
Published:2025-01-23
CLC Number:
PAN Yuzhen, WEI Jiawei, KHAN Rezwan Al Islam, CHEN Xiong, WANG Hongbo, SHANG Huiliang. Design and Analysis of a Novel Modular Agricultural Robot with Its Redundant Cooperative Control Strategy[J]. Journal of Mechanical Engineering, 2024, 60(23): 88-101.
| [1] VOUGIOUKAS S G. Agricultural robotics[J]. Annual Review of Control,Robotics,and Autonomous Systems,2019,2:365-392. [2] LEU A,RAZAVI M,LANGSTADTLER L,et al. Robotic green asparagus selective harvesting[J]. IEEE/ASME Transactions on Mechatronics,2017,22(6):2401-2410. [3] ROURE F. GRAPE:Ground robot for vineyard monitoring and protection[C]// ROBOT 2017:Third Iberian Robotics Conference,Springer Verlag,2018:249-260. [4] WILLIAMS H,NEJATI M,BELL J,et al. Robotic Kiwifruit harvesting using machine vision,convolutional neural networks,and robotic arms[J]. Biosystems Engineering,2019,181:140-156. [5] ARAD B,BALENDONCK J,BARTH R,et al. Development of a sweet pepper harvesting robot[J]. Journal of Field Robotics,2020,37(6):1027-1039. [6] LYTRIDIS C,KABURLASOS V G,PACHIDIS T,et al. An overview of cooperative robotics in agriculture[J]. Agronomy. MDPI,2021,11:1818. [7] RAMIN S R,WELTZIEN C,HAMEED I,et al. Research and development in agricultural robotics:A perspective of digital farming[J]. International Journal of Agricultural and Biological Engineering,2018,11(4):1-11. [8] GRIMSTAD L. On the design of a low-cost,light-weight,and highly versatile agricultural robot[C]// Proceedings of IEEE Workshop on Advanced Robotics and its Social Impacts,ARSO:IEEE Computer Society,2016:1-6. [9] 汪步云,彭稳,梁艺,等.全地形移动机器人悬架机构设计及特性分析[J]. 机械工程学报,2022,58(9):71-86. WANG Buyun,PENG Wen,LIANG Yi,et al. Characteristics analysis and optimization design of suspension mechanism of all-terrain mobile robot[J]. Journal of Mechanical Engineering,2022,58(9):71-86. [10] GRIMSTAD L,JOHAN FROM P. Thorvald II-a modular and reconfigurable agricultural robot[J]. IFAC-PapersOnLine,2017,50(1):4588-4593. [11] 顾宝兴,姬长英,王海青,等. 智能移动水果采摘机器人设计与试验[J]. 农业机械学报,2012,43(6):153-160. GU Baoxing,JI Changying,WANG Haiqing,et al. Design and experiment of intelligent mobile fruit picking robot[J]. Transactions of the Chinese Society for Agricultural Machinery,2012,43(6):153-160. [12] YIM S. Comparison among active front,front independent,4-wheel and 4-wheel independent steering systems for vehicle stability control[J]. Electronics,2020,9(5):798. [13] 牛雪梅. 新型3-DOF驱动冗余并联机构动力学建模及其滑模控制研究[D]. 镇江:江苏大学,2014. NIU Xuemei. Dynamic modeling and sliding mode control for a novel 3-DOF parallel mechanism with actuation redundancy[D]. Zhenjiang:Jiangsu University,2014. [14] 董中华. 串番茄采摘机器人的控制策略研究[D]. 兰州:兰州理工大学,2021. DONG Zhonghua. Research of robot control strategy for skewer tomatoes picking manipulator[D]. Lanzhou:Lanzhou University of Technology,2021. [15] 廖建峰. 移动机器人冗余特性下的运动规划与协调控制[D]. 杭州:浙江大学,2019. LIAO Jianfeng. Motion planning and coordinated control for redundant mobile robot[D]. Hangzhou:Zhejiang University,2019. [16] 周宇杰,吴强贺,磊盈,等. 名优茶采摘机器人的系统设计与试验[J]. 机械工程学报,2022,58(19):12-23. ZHOU Yujie,WU Qianghe,LEI Ying,et al. Design and experiment of intelligent picking robot for famous tea[J]. Journal of Mechanical Engineering,2022,58(19):12-23. [17] 刘成良,贡亮,苑进,等. 农业机器人关键技术研究现状与发展趋势[J]. 农业机械学报,2022,53(7):1-22. LIU Chengliang,GONG Liang,YUAN Jin,et al. Current status and development trends of agricultural robots[J]. Transactions of the Chinese Society for Agricultural Machinery,2022,53(7):1-22. [18] PAN Y. Design of a hopping robot with its kinetics and dynamics analysis[C]// 2021 IEEE International Conference on Robotics and Biomimetics,ROBIO 2021. Institute of Electrical and Electronics Engineers Inc.,2021:411-416. |
| [1] | ZHANG Xinjie, WANG Luhang, GUO Konghui, LIU Yang, JIN Gengrui, YAO Quan. System-level Co-design Optimization for Active Camber and Toe Suspension Systems [J]. Journal of Mechanical Engineering, 2026, 62(8): 21-32. |
| [2] | CHEN Junjie, TANG Yuzhou, YANG Shujun, WU Mingyu. Constitutive Model of Anisotropic Hyper-viscoelasticity for Double-layer Cord Reinforced Air Spring Rubber Bellows [J]. Journal of Mechanical Engineering, 2026, 62(8): 49-59. |
| [3] | PENG Shanshan, HE Lin, XU Ziang, WANG Mingzhe, WEI Yujiang, SHI Qin. Backstepping Angle Control with Resistance Torque Proportional Integral Observer for Sensorless Steer-by-wire [J]. Journal of Mechanical Engineering, 2026, 62(8): 114-124. |
| [4] | XIONG Lu, HU Xuge, Lü Haoran, TANG Chen. Review of Road Surface Unevenness Recognition for Vehicle Motion Control [J]. Journal of Mechanical Engineering, 2026, 62(8): 139-156. |
| [5] | WU Jianyang, WANG Junye, YANG Bo, DING Xiaolin, LIU Xin, ZHANG Lei. Research on All-wheel Steering Control Strategy for Multi-axle Heavy-duty Distributed Drive Electric Vehicles [J]. Journal of Mechanical Engineering, 2026, 62(8): 317-331. |
| [6] | XIAO Yue, HE Yi, ZHANG Ming. Hierarchical MPC-based Trajectory Tracking Control for Distributed Four-wheel-drive Vehicles [J]. Journal of Mechanical Engineering, 2026, 62(8): 475-488. |
| [7] | WANG Yuxiang, GAO Yang, JIANG Enchao, DONG Na, CHEN Xudong, PENG Fan, WANG Liwen. Wind Turbine Blade Health Monitoring Method Based on GAF-MACNN [J]. Journal of Mechanical Engineering, 2026, 62(7): 139-149. |
| [8] | LEI Zhuo, QIAO Baijie, WANG Yanan, DU Jun, LIANG Jun, LIU Yuanshi, FU Yu, CHEN Xuefeng. Sparse Reconstruction for Blade Tip Timing Signal Based on SPOQ Regularization Term [J]. Journal of Mechanical Engineering, 2026, 62(7): 208-220. |
| [9] | GUO Wenhua, WANG Ke, ZHENG Wen, WANG Yuzhong, XU Chen, JI Qianyu, FENG Zuren. Calibration Method for Estimating the Mean Deflection Voltage of Electron Gun [J]. Journal of Mechanical Engineering, 2026, 62(7): 385-395. |
| [10] | LIU Junjie, ZHANG Youchao, ZHANG Houchao, ZHANG Bing, XU Quan, ZHU Xiaoyang, LAN Hongbo. Hybrid Manufacturing of High-precision Copper-based Flexible Transparent Circuits Based on Electric-field-driven Micro 3D Printing [J]. Journal of Mechanical Engineering, 2026, 62(7): 427-438. |
| [11] | GE Zhenghui, WANG Rui, HU Qifan, ZHU Yongwei. Study of Electrochemical Texturing Treatment of Aluminum Alloy Surface and Its Adhesive Performance [J]. Journal of Mechanical Engineering, 2026, 62(7): 462-477. |
| [12] | SHAO Jian, HE Anrui, YANG Quan. Research Progress on High-efficiency Intensive Production and Lean Quality Control for Wide Hot-rolled Steel Strip [J]. Journal of Mechanical Engineering, 2026, 62(6): 1-28. |
| [13] | ZHOU Qiang, LU Honghong, GUO Denggang, CHEN Pengwan, WANG Baoyu. Microstructure and Mechanical Behavior of TA2/TC4 Titanium Alloy Composites Fabricated by Explosion Welding + Rolling [J]. Journal of Mechanical Engineering, 2026, 62(6): 100-110. |
| [14] | SHU Xuedao, CHEN Yusen, WANG Ying, DAI Yuechen, ZUO Jinrong, ZHANG Qingdong. Coordination Mechanism and Intelligent Regulation of Simultaneous Forming of Hollow Shaft-shaped Holes in Aluminum Alloys [J]. Journal of Mechanical Engineering, 2026, 62(6): 121-131. |
| [15] | YUAN Yuan, Liu Xiucheng, QI Pan, Cao Wenbo, Wang Zhenghong, WU Bin, Gao Xiang. A Non-Destructive Surface Hardness Testing Method Utilizing the Transduction Curve of a Magnetostrictive SH0 Guided Wave Sensor [J]. Journal of Mechanical Engineering, 2026, 62(6): 228-236. |
| Viewed | ||||||
|
Full text |
|
|||||
|
Abstract |
|
|||||
