Region Performance Matching Forming Method for Selective Laser Melting Based on Feature Recognition of Skeleton Line

doi:10.3901/JME.2024.15.272

Abstract

Abstract: For parts with thin-wall region and sharp corner region in selective laser melting forming, different feature regions have distinct performance requirements in real service scenarios and different optimal process strategies. In view of the lack of relevant feature region extraction and process planning module in existing SLM process planning and manufacturing software, a region performance matching forming method for selective laser melting based on skeleton line feature recognition is proposed to realize integrated forming of parts with process strategies matching performance requirements of feature regions such as thin-wall, sharp corner and large plane. The performance requirements of each feature region are determined by simulation or experiment, then main skeleton line of the slice contour is extracted, and the slice contour is regionally divided by the main skeleton lines’ features. At the same time, the process strategy matching the performance requirements of each region is determined by process database. The process strategy matching performance requirements is assigned to the corresponding area and the forming part is printed. The Ti6Al4V material is used to print the scale-down model of impeller parts commonly used in aerospace for experiments. The impeller's requirements are determined as high tensile strength of the central space and good plasticity of the blade space. The impeller's slice contours are extracted and partition parameters are set to divide the center of the impeller and the blade. Then the process strategy obtained from the test is given to the center of the impeller and the blade. After that, the part is printed. Finally, the microstructure of the two places is analyzed, and feasibility of the method is verified. The proposed region performance matching forming method for selective laser melting based on skeleton line feature recognition can effectively achieve integrated manufacturing of parts with adjustable regional performance. It meets the differentiated performance requirements of different regions during the service process of parts. The method provides effective means for the integrated forming of high-performance parts.

Key words: selective laser melting, skeleton line, feature recognition, forming method

CLC Number:

TG665

HE Junchi, ZHANG Lichao, WANG Senlin, TANG Mingkai, SHI Yusheng. Region Performance Matching Forming Method for Selective Laser Melting Based on Feature Recognition of Skeleton Line[J]. Journal of Mechanical Engineering, 2024, 60(15): 272-282.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2024.15.272

http://www.cjmenet.com.cn/EN/Y2024/V60/I15/272

References

[1] 杨永强，陈杰，宋长辉，等.金属零件激光选区熔化技术的现状及进展[J].激光与光电子学进展，2018，55(1):9-21.YANG Yongqiang，CHEN Jie，SONG Changhui，et al.Current status and progress on technology of selective laser melting of metal parts[J].Laser and Optoelectronics Progress，2018，55(1):9-21.
[2] 郭东明.高性能制造[J].机械工程学报，2022，58(21):225-242.GUO Dongming.High performance manufacturing[J].Journal of Mechanical Engineering，2022，58(21):225-242.
[3] GU Dongdong，SHI Xinyu，POPRAWE R，et al.Material-structure-performance integrated laser-metal additive manufacturing[J].Science，2021，372(6545):932.
[4] 顾冬冬，张红梅，陈洪宇，等.航空航天高性能金属材料构件激光增材制造[J].中国激光，2020，47(5):32-55. GU Dongdong，ZHANG Hongmei，CHEN Hongyu，et al.Laser additive manufacturing of high-performance metallic aerospace components[J].Chinese Journal of Lasers，2020，47(5):32-55.
[5] 管志方.基于特征识别的激光选区熔化工艺策略智能规划方法研究[D].南京:南京理工大学，2020. GUAN Zhifang.Research on intelligent planning method of selective laser melting process strategy based on feature recognition[D].Nanjing:Nanjing University of Science and Technology，2020.
[6] WANG Senlin，ZHANG Lichao，CAI Chao，et al.Field-driven data processing paradigm for multi-information additive manufacturing[J].Additive Manufacturing，2023，61:103352.
[7] 王迪.选区激光熔化成型不锈钢零件特性与工艺研究[D].广州:华南理工大学，2011.WANG Di．Study on the fabrication properties and process of stainless steel parts by selective laser melting[D]．Guangzhou:South China University of Technology，2011．
[8] 万乐，王思琦，张晓伟，等.基于分区扫描的选区激光熔化钛合金的成形质量[J].激光与光电子学进展，2018，55(9):250-259.WAN Le，WANG Siqi，ZHANG Xiaowei，et al.Forming quality of titanium alloys by selective laser melting based on partition scanning[J].Laser & Optoelectronics Progress，2018，55(9):250-259.
[9] DRUZGALSKI C L，ASHBY A，GUSS G，et al.Process optimization of complex geometries using feed forward control for laser powder bed fusion additive manufacturing[J].Additive Manufacturing，2020，34:101169.
[10] SONG Changhui，YANG Yongqiang，LIU Yang，et al.Study on manufacturing of W-Cu alloy thin wall parts by selective laser melting[J].International Journal of Advanced Manufacturing Technology，2015，78(5-8):885-893.
[11] MA Zhengxiong，NING Jie，YU Bing，et al.Effects of process parameters and scanning patterns on quality of thin-walled copper flanges manufactured by selective laser melting[J].Journal of Manufacturing Processes，2021，72:419-430.
[12] GULLANE A，MURRAY J W，HYDE C J，et al.On the use of multiple layer thicknesses within laser powder bed fusion and the effect on mechanical properties[J].Materials & Design，2021，212:110256.
[13] 孙靖，李鹏，朱小刚，等.激光选区熔化制备TC4钛合金的组织演变[J].应用激光，2018，38(6):908-914. SUN Jing，LI Peng，ZHU Xiaogang，et al.Microstructure evolution of TC4 titanium alloy prepared by selective laser melting[J].Applied Laser，2018，38(6):908-914.
[14] MIRANDA G，FARIA S，BARTOLOMEU F，et al.A study on the production of thin-walled Ti6Al4V parts by selective laser melting[J].Journal of Manufacturing Processes，2019，39:346-355.
[15] 徐仁俊.基于选择性激光熔化技术的有限元分析和扫描路径优化[D].重庆:重庆大学，2016. XU Renjun.Finite element analysis and scanning strategy optimization based on selective laser melting[D].Chongqing:Chongqing University，2016.
[16] 邓诗诗，杨永强，李阳，等.分区扫描路径规划及其对SLM成型件残余应力分布的影响[J].中国激光，2016，43(12):67-75. DENG Shishi，YANG Yongqiang，LI Yang，et al.Planning of area-partition scanning path and its effect on residual stress of SLM molding parts[J].Chinese Journal of Lasers，2016，43(12):67-75.
[17] FORTUNE S.A sweepline algorithm for voronoi diagrams[J].Algorithmica，1987，2:153-174.
[18] KARAVELAS M I.A robust and efficient implementation for the segment Voronoi diagram[C]//International Symp.on Voronoi Diagrams in Science & Engineering，Quebec，Canada，2004.
[19] 李维诗，李江雄，柯映林.平面多边形方向及内外点判断的新方法[J].计算机辅助设计与图形学学报，2000(6):405-407.LI Weishi，LI Jiangxiong，KE Yinglin.Orientation and point inclusion test for planar polygon[J].Journal of Computer-Aided Design and Computer Graphics，2000(6):405-407.
[20] WU Sheng，WEN Weiliang，XIAO Boxiang，et al.An accurate skeleton extraction approach from 3D point clouds of maize plants[J].Frontiers in Plant Science，2019，10:248.
[21] 何援军.计算机图形学[M].北京:机械工业出版社，2006. HE Yuanjun.Computer graphics[M].Beijing:China Machine Press，2006.
[22] 郑彤，章定国，廖连芳，等.航空发动机叶片刚柔耦合动力学分析[J].机械工程学报，2014，50(23):42-49. ZHENG Tong，ZHANG Dingguo，LIAO Lianfang，et al.Rigid-flexible coupling dynamic analysis of aero-engine blades[J].Journal of Mechanical Engineering，2014，50(23):42-49.
[23] MA Liang，BIN Hongzan.Temperature and stress analysis and simulation in fractal scanning-based laser sintering[J].International Journal of Advanced Manufacturing，2007，34(9-10):898-903.
[24] 岑伟洪，汤辉亮，张江兆，等.提升分区搭接质量的激光选区熔化扫描策略[J].中国激光，2021，48(18):173-183. CEN Weihong，TANG Huiliang，ZHANG Jiangzhao，et al.Scanning strategy to improve the overlapping quality of partition in selective laser melting[J].Chinese Journal of Lasers，2021，48(18):173-183.
[25] DENG MengCheng，SUI Shang，YAO Bo，et al.Microstructure and room-temperature tensile property of Ti-5.7Al-4.0Sn-3.5Zr-0.4Mo-0.4Si-0.4Nb-1.0Ta-0.05C with near equiaxed β grain fabricated by laser directed energy deposition technique[J].Journal of Materials Science & Technology，2022，101:308-320.