Mechanical Properties and Microstructure Evolution of 310S Austenitic Stainless Steel Welded Joint at High Temperature

doi:10.3901/JME.2024.12.250

Abstract

Abstract: Heat-resistant stainless steel is an ideal material for high level waste liquid solidified container, and the high temperature properties and microstructure evolution of welded joints have an important effect on dimensional stability and service safety for solidified container. The welding joint of 310S austenitic stainless steel is prepared by plasma arc welding technology. The influence of different temperatures (room temperature to 1 100 ℃) on the tensile properties of the welded joint and the creep properties of the welded joint at 600 ℃ and 1 100 ℃ are studied. The microstructure, fracture morphology, phase composition, element distribution and tensile properties are analyzed by means of optical microscope, scanning electron microscopy, electron back scatter diffraction, transmission electron microscopy and tensile testing machine. The results show that the elongation of the material is the lowest near the sensitization temperature, and large holes appear in the tensile fracture. With the temperature increasing to 1 100 ℃, oxidation occurs on the fracture surface. The welded joint has excellent high temperature creep resistance. Twin microstructure is formed in the base metal zone after 600 ℃ creep, ferrite disappears and grain size grows after 1 100 ℃ creep. The effects of high temperature and stress promote the precipitation of M₂₃C₆ phase at the grain boundary, which weakens the grain boundary strength. The cracks nucleate, grow and expand at the grain boundary, then finally cause the welded joints intergranular fracture. The research results provide reference for the safety of the high level waste liquid solidifying vessel and enrich the basic data of the high level waste liquid post-treatment.

Key words: 310S stainless steel, welded joint, mechanical properties, microstructure evolution, creep

CLC Number:

TG444

JIANG Yunlu, CHEN Jing, KAN Ying, WU Changzhong, CHEN Huaining. Mechanical Properties and Microstructure Evolution of 310S Austenitic Stainless Steel Welded Joint at High Temperature[J]. Journal of Mechanical Engineering, 2024, 60(12): 250-258.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2024.12.250

http://www.cjmenet.com.cn/EN/Y2024/V60/I12/250

References

[1] 谢佼，胡喆. 国内首座高水平放射性废液玻璃固化设施投运[J]. 电子产品可靠性与环境试验，2021，39(5)：60. XIE Jiao，HU Zhe. The first glass curing facility for high-level radioactive waste liquid was put into operation in China[J]. Reliability and Environmental Testing of Electronic Products，2021，39(5)：60.
[2] LO K，SHEK C，LAI J. Recent developments in stainless steels[J]. Materials Science and Engineering R：Reports 2009，65(4)：39-104.
[3] QIAN Jiong，CHEN Changfeng，YU Haobo，et al. The influence and the mechanism of the precipitate/austenite interfacial C-enrichment on the intergranular corrosion sensitivity in 310 S stainless steel[J]. Corrosion Science，2016，111：352-361.
[4] 胡兴，彭昭成，冯广杰，等. SUS310S不锈钢局部真空电子束焊接接头残余应力及变形研究[J]. 机械工程学报，2020，56(21)：38-47. HU Xing，PENG Zhaocheng，FENG Guangjie，et al. Numerical simulation of residual stress and deformation of SUS310S stainless steel local vacuum electron beam welded joint[J]. Journal of Mechanical Engineering，2020，56(21)：38-47.
[5] JIANG Y，KAN Y，CHEN H. Heterogeneous microstructure-induced creep failure responses in various sub-zones of modified 310S welded joints[J]. Metals，2022，12(116)：1-15.
[6] KUAAMA T，OMORI T，SAITO T，et al. Ultra-large single crystals by abnormal grain growth[J]. Nature Communications，2017，8：1-9.
[7] WANG Z，LIANG T，XING W，et al. σ-phase precipitation mechanism of 15Cr–15Ni titanium-modified austenitic stainless steel during long-term thermal exposure[J]. Acta Metallurgica Sinica (English Letters)，2018，31(3)：281-289.
[8] WEST D，HULANCE J，HIGGISION R，et al. σ-phase precipitation in 347HFG stainless steel[J]. Materials Science and Technology，2013，29：835-842.
[9] GONZAGA，A C，BARBOSA C，TAVARES S，et al. Influence of post welding heat treatments on sensitization of AISI 347 stainless steel welded joints[J]. Journal of Materials Research and Technology，2020，9(1)：908-921.
[10] NASSIRAEI H，MOJTAHEDI A，LOTFOLLAHI M A，et al. Capacity of tubular X-joints reinforced with collar plates under tensile brace loading at elevated temperatures[J]. Thin Walled Structures，2019，142：426-443.
[11] NASSIREAI H，LOTFULLAHI M，NESHAEI S A，et al. Structural behavior of tubular X-joints strengthened with collar plate under axially compressive load at elevated temperatures[J]. Marine Structures，2018，61：46-61.
[12] LI R，FU B，DONG T，et al.，Effect of annealing treatment on microstructure，mechanical property and anti-corrosion behavior of X2CrNi12 ferritic stainless steel[J]. Journal of Materials Research and Technology，2022，18：448-460.
[13] FOROUZAN F，NAJAFIZADEH A，KERMANPUR A，et al.，Production of nano/submicron grained AISI 304L stainless steel through the martensite reversion process[J]. Materials Science and Engineering A，2010，527(27)：7334-7339.
[14] REZAEI H A，GHAZANI M S，EGHBALI B. Effect of post deformation annealing on the microstructure and mechanical properties of cold rolled AISI 321 austenitic stainless steel[J]. Materials Science and Engineering A，2018，736：364-374.
[15] WANG X，CHEN X M，SUN Q，et al. Formation mechanism of δ-ferrite and metallurgy reaction in molten pool during press-hardened steel laser welding[J]. Materials Letters，2017，206：143-145.
[16] 谢胜涛，邵书东，亓海燕，等. 稀土元素对430铁素体不锈钢组织和性能的影响[J]. 中国冶金，2022，32(6)：94-100. XIE Shengtao，SHAO Shudong，QI Haiyan，et al. Effect of rare earth elements on microstructure and properties of 430 ferritic stainless steel[J]. China Metallurgy，2022，32(6)：94-100.
[17] LI Hongmei，TAKATA N，KOBASHI M，et al. Effect of added stabilizing elements on thermal activation process of plastic deformation in 18Cr ferritic stainless steel[J]. Materials Science and Engineering A，2021，824：141866.
[18] TAN L，ALLEN T R，BUSBY J T. Grain boundary engineering for structure materials of nuclear reactors[J]. Journal of Nuclear Materials，2013，441(1)：661-666.
[19] HIRAYAMA K，YOSHII Y，MORIZONO Y，et al. Grain boundary engineering of 10% Cr ferritic-martensitic steel SUH3[J]. ISIJ International，2015，55(9)：1973-1979.
[20] LI Y，WANG X. Strengthening mechanisms and creep rupture behavior of advanced austenitic heat resistant steel SA-213 S31035 for A-USC power plants[J]. Materials Science and Engineering A，2020，775：138991.
[21] LU L，SHEN Y，CHEN X，et al. Ultrahigh strength and high electrical conductivity in copper[J]. Science，2004，304(5669)：422-426.
[22] 李国平，裴海祥，李建春，等. σ相对S32760超级双相不锈钢组织和性能的影响[J]. 工程科学学报，2016，38(3)：364-370. LI Guoping，PEI Haixiang，LI Jianchun，et al. Influence of σ phases on the microstructure and properties of S32760 super duplex stainless steel[J]. Chinese Journal of Engineering，2016，38(3)：364-370.
[23] CHEN X H，REN X P，XU H，et al．Effect of superplastic deformation on the bonding property of 00Cr25Ni7Mo3N duplex stainless steel[J]. Int. J. Miner. Met. Mater.，2012，19(4)：518.