Study on Compatibility between Wave-motion Ultrasonic Milling and Post Treatment Process of Ti-6Al-4V

doi:10.3901/JME.2023.23.320

Abstract

Abstract: In the field of aerospace difficult-to-cut alloy machining, wave motion ultrasonic milling (WMUM) has been demonstrated as a new finish machining method which can simultaneously improve machining accuracy and surface strengthening during cutting. In engineering applications, post treatment processes such as heat treatment and pickling are necessary to be applied to aviation titanium alloy components to eliminate surface tensile residual stress and facilitate defect detection. However, the influence of these post treatment processes on the strengthening effect obtained by WMUM has not been revealed. In order to better comprehend the compatibility between WMUM and post-treatment process, experiments on both WMUM and conventional side milling of Ti-6Al-4V are conducted, and surface integrity parameters such as residual stress, subsurface morphology and microhardness are characterized. The results show that compared to that under conventional milling-heat treatment-pickling process, the workpiece surface in WMUM under heat treatment-milling-pickling process still retains a compressive residual stress of 252.01 MPa. Therefore, this paper proposes a heat treatment-WMUM-pickling process for aviation titanium alloy components, which is compatible with the existing post-treatment process and can retain the strengthening effect of wave milling.

Key words: wave-motion ultrasonic milling, heat treatment, pickling, compatibility, surface integrity

CLC Number:

V261

LIU Yihang, ZHOU Li, HAN Xiong, ZHANG Mingliang, GENG Daxi, LIU Lianxing, YIN Xiaoming, JIANG Xinggang, ZHANG Deyuan. Study on Compatibility between Wave-motion Ultrasonic Milling and Post Treatment Process of Ti-6Al-4V[J]. Journal of Mechanical Engineering, 2023, 59(23): 320-330.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2023.23.320

http://www.cjmenet.com.cn/EN/Y2023/V59/I23/320

References

[1] DING H，IBRAHIM R，CHENG K，et al. Experimental study on machinability improvement of hardened tool steel using two dimensional vibration-assisted micro-end-milling[J]. International Journal of Machine Tools & Manufacture，2010，50(12):1115-1118.
[2] 刘佳佳，姜兴刚，高泽，等.高速旋转超声椭圆振动侧铣削振幅对钛合金表面完整性影响的研究[J]. 机械工程学报，2019，55(11):215-223. LIU Jiajia，JIANG Xinggang，GAO Ze，et al. Investigation of the effect of vibration amplitude on the surface integrity in high-speed rotary ultrasonic elliptical machining for side milling of Ti-6Al-4V[J]. Journal of Mechanical Engineering，2019，55(11):215-223.
[3] NI C B，ZHU L D，LIU C F，et al.Analytical modeling of tool-workpiece contact rate and experimental study in ultrasonic vibration-assisted milling of Ti-6Al-4V[J]. International Journal of Mechanical Sciences，2018，142:97-111.
[4] ZHU L D，NI C B，YANG Z C，et al. Investigations of micro-textured surface generation mechanism and tribological properties in ultrasonic vibration-assisted milling of Ti-6Al-4V[J]. Precision Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology，2019，57:229-243.
[5] PANG Y，FENG P F，WANG J J，et al. Performance analysis of the longitudinal-torsional ultrasonic milling of Ti-6Al-4V[J]. International Journal of Advanced Manufacturing Technology，2021，113(5-6):1255-1266.
[6] HUANG H F，LU D，WU Y B，et al. Finite element analysis of ultrasonic vibration assisted milling of Ti-6Al-4V[J]. Materials Processing Technology，2012，538-541:823-827.
[7] MAUROTTO A，WICKRAMARACHCHI C T. Experimental investigations on effects of frequency in ultrasonically-assisted end-milling of AISI 316L:A feasibility study[J]. Ultrasonics，2016，65:113-120.
[8] LIU J J，JIANG X G，HAN X，et al. Effects of rotary ultrasonic elliptical machining for side milling on the surface integrity of Ti-6Al-4V[J]. International Journal of Advanced Manufacturing Technology，2019，101(5-8):1451-1465.
[9] ZHANG M L，ZHANG D Y，GENG D X，et al. Surface and sub-surface analysis of rotary ultrasonic elliptical end milling of Ti-6Al-4V[J]. Materials & Design，2020，191:108658.
[10] ZHANG M L，ZHANG D Y，GENG D X，et al. Effects of tool vibration on surface integrity in rotary ultrasonic elliptical end milling of Ti-6Al-4V[J]. Journal of Alloys and Compounds，2020，821:153266.
[11] 蒲娟，许建新，王凯，等.飞机制造质量保证技术研究[J]. 机械制造，2014，52(4):1-5. PU Juan，XU Jianxin，WANG Kai，et al. Research on aircraft manufacturing quality assurance technology [J]. Mechanical Manufacturing，2014，52(4):1-5.
[12] 张利军，李时威，袁抒，等. 钛合金材料切削加工的真空热处理技术[J]. 金属加工:热加工，2012(S2):66-68. ZHANG Lijun，LI Shiwei，YUAN Shu，et al. Vacuum heat treatment technology for titanium alloy cutting[J]. Metal processing:Hot working，2012(S2):66-68.
[13] LIU Y，XU H，ZHU L，et al. Investigation into the microstructure and dynamic compressive properties of selective laser melted Ti-6Al-4V alloy with different heating treatments[J]. Materials Science and Engineering:A，2021，805:140561.
[14] 赵亮，李书科. 先进热处理工艺对金属材料的切削加工性能的影响[J]. 纺织机械，2011(3):46-47. ZHAO Liang，LI Shuke. Influence of advanced heat treatment process on the machinability of metal materials[J]. Textile Machinery，2011(3):46-47.
[15] 和蓉，米磊，郭凯，等. 钛合金真空热处理的研究现状及发展趋势[J]. 世界有色金属，2021(8):44-48. HE Rong，MI Lei，GUO Kai，et al. Research status and development trend of vacuum heat treatment of titanium alloy [J]. World Nonferrous Metals，2021(8):44-48.
[16] VENKATESH B，CHEN D，BHOLE S. Effect of heat treatment on mechanical properties of Ti-6Al-4V eli alloy[J]. Materials Science and Engineering:A，2009，506(1-2):117-124.
[17] PANG L J，YU T J，CAO Z L. Effect of the heat treatment process on machinability of TC4 alloy[C]. Advanced Materials Research，2011:64-68.
[18] PANG L J，TANG M. Impact of heat-treated microstructure on milling performance of Ti-6Al-4V alloy[C]. Advanced Materials Research，2012:1175-1179.
[19] TELRANDHE S，SAXENA A K，SUTAR P，et al. Influence of laser heat treatment on machinability of Ti-6Al-4V alloy[J]. Procedia Manufacturing，2016，5:282-294.
[20] 王恺婷. 钛和钛合金板的酸洗工艺分析[J]. 中国金属通报，2021(13):73-74. WANG Kaiting. Pickling process analysis of titanium and titanium alloy plates [J]. Chinese Metal Bulletin，2021(13):73-74.
[21] SCHUTZ R W，COVINGTON L C. Effect of oxide films on the corrosion resistance of titanium[J]. Corrosion，1981，37(10):585.
[22] HU Y，ZHANG J，WANG L，et al. A simple and effective resin pre-coating treatment on grinded，acid pickled and anodised substrates for stronger adhesive bonding between Ti-6Al-4V titanium alloy and CFRP[J]. Surface and Coatings Technology，2022，432:128072.
[23] SUTTER E，HLAWKA F，CORNET A. Comparative behavior of titanium and zirconium in hydrofluoric-nitric acid pickling solutions[J]. Corrosion -Houston Tx-，1990，46(7):537-544.
[24] IZMAN S，KADIR M R A，ANWAR M，et al. Effect of pickling process on adhesion strength of ti oxide layer on titanium alloy substrate[C]. Advanced Materials Research，2011:1621-1630.
[25] IZMAN S，ABDUL-KADIR M R，ANWAR M，et al. Effect of pickling and mechanical surface treatment methods on adhesion strength of Ti oxide layer formed on titanium alloy substrate[C]//201034th IEEE/CPMT International Electronic Manufacturing Technology Symposium (IEMT)，2010:1-4.
[26] GOPAL J，TATA B，GEORGE R，et al. Biofouling control of titanium by microroughness reduction[J]. Surface engineering，2008，24(6):447-451.
[27] ESKIN G I，SINYAVSKII V S，USOVA V V. Regularities of the intensifying effect of ultrasonic treatment on titanium alloy pickling[J]. Protection of Metals，2003，39(6):551-559.
[28] SINYAVSKII V S，USOVA V V，ESKIN G I. Peculiarities of a unified environmentally clean system of etching and bright pickling α- and α +β-titanium alloys[J]. Protection of Metals，2004，40(4):303-309.
[29] VERMESSE E，MABRU C，ARURAULT L. Surface integrity after pickling and anodization of Ti-6Al-4V titanium alloy[J]. Applied Surface Science，2013，285:629-637.
[30] 郑锋，程挺宇，张巧云. 钛及钛合金的酸洗技术[J]. 稀有金属与硬质合金，2009，37(3):26-28. ZHENG Feng，CHENG Tingyu，ZHANG Qiaoyun. Pickling technology of titanium and titanium alloy [J]. Rare Metals and Cemented Carbides，2009，37(3):26-28.
[31] LIU Y，GENG D，SHAO Z，et al. A study on strengthening and machining integrated ultrasonic peening drilling of Ti-6Al-4V[J]. Materials & Design，2021，212:110238.