Research Progress and Prospect of Water Hydraulic Manipulator for Underwater Operation

doi:10.3901/JME.2023.04.283

Abstract

Abstract: Water hydraulics have board, promising application and development prospects in ocean exploration, marine resources exploitation, and other fields because of its superiorities underwater. Underwater manipulator is an important equipment to perform underwater tasks. By integrating water hydraulic transmission and the underwater manipulator, the complexity of the underwater vehicle-manipulator system can be reduced, and the functionality can be uplifted. By expounding the structural characteristics, research progress and commercialization status, the pros and cons of different driving power and its influence toward the performance and design point of manipulators are detailed which come the conclusion that water hydraulic transmission is the optimal solution for underwater tools. As key technical issues that need to be solved in the design of water hydraulic manipulator, the research progress of tribology and lubrication, materials, dynamics modelling, and motional control are analysed and summarized. Finally, the development trend of underwater manipulator is prospected, and the conclusion is given to provide a reference for relevant research.

Key words: water hydraulics, underwater manipulator, ocean engineering

CLC Number:

TH137
P75

JI Hui, LAN Yu, WU Ziwei, NIE Songlin, YIN Fanglong. Research Progress and Prospect of Water Hydraulic Manipulator for Underwater Operation[J]. Journal of Mechanical Engineering, 2023, 59(4): 283-294.

References

[1] 蒋新松. 水下机器人[M]. 沈阳:辽宁科学技术出版社,2000.
JIANG Xinsong. Unmanned underwater vehicles[M]. Shenyang:Liaoning Science And Technology Publishing House,2000.
[2] United Nations. Report of the United Nations conference on environment and development[EB/OL]. (1992-06-03)[2021-07-06]. https://undocs.org/en/A/CONF.151/26/Rev.1(vol.I).
[3] 国家海洋局战略规划与经济司. 以十九大精神为指引推动海洋战略规划与经济建设新发展[N]. 中国海洋报,2017-11-28(001).
Department of Strategic Planning and Economics,State Oceanic Administration. Guided by the spirit of the 19th National Congress of the Communist Party of China,to promote new development of marine strategic planning and economic construction[N]. China Ocean News,2017-11-28(001).
[4] TAYLOR A J. Design issues for underwater manipulator systems[J]. Mechatronics,1993,3(4):419-432.
[5] 常宗瑜,张扬,郑方圆,等. 水下机器人-机械手系统研究进展:结构、建模与控制[J]. 机械工程学报,2020,56(19):53-69.
CHANG Zongyu,ZHANG Yang,ZHENG Fangyuan,et al. Research progress of underwater vehicle-manipulator systems:Configuration, modeling and control[J]. Journal of Mechanical Engineering,2020,56(19):53-69.
[6] ZHAO Wenlong,SONG Yuntao,WU Huapeng,et al. Concept design of the CFETR divertor remote handling system[J]. Fusion Engineering and Design,2015,98:1706-1709.
[7] DOMINGUEZ L M O. Optimization and redesign of a spherical wrist for a water hydraulic manipulator[D]. Province of Western Finland:Tampere University of Technology,2011.
[8] 韩曼芬. CFETR遥操作维护系统水压驱动PID控制技术的研究[D]. 合肥:中国科学技术大学,2016.
HAN Manfen. Research of PID control for water hydraulic system of CFETR RH maintenance[D]. Hefei:University of Science and technology of China,2016.
[9] BARKER L D L,JAKUBA M V,BOWEN A D,et al. Scientific challenges and present capabilities in underwater robotic vehicle design and navigation for oceanographic exploration under-ice[J]. Remote Sensing,2020,12(16):2588.
[10] YOERGER D R,SCHEMPF H,DIPIETRO D M. Design and performance evaluation of an activitly compliant underwater manipulator for full-ocean depth[J]. Journal of Robotic Systems,1991,8(3):371-392.
[11] 刘运亮,张奇峰. 模块化水下电动机械手设计与运动学分析[J]. 机械设计与制造,2012(10):53-55.
LIU Yunliang,ZHANG Qifeng. Modular design and kinematic analysis of underwater electrical manipulator[J]. Machinery Design & Manufacture,2012(10):53-55.
[12] 岳鹏,张奇峰,安晓卫,等. 水下七功能电动机械手设计研究[J]. 机械设计与制造,2014(4):114-117.
YUE Peng,ZHANG Qifeng,AN Xiaowei,et al. Structure design of 7F underwater electric manipulator and feasibility analysis[J]. Machinery Design & Manufacture,2014(4):114-117.
[13] 张奇峰,范云龙,张竺英. 深海5功能水下电动机械手设计及误差分析[J]. 机械设计与制造,2015(4):140-143.
ZHANG Qifeng,FAN Yunlong,ZHANG Zhuying. Development and error analysis of a deep-ocean 5-function underwater electric manipulator[J]. Machinery Design & Manufacture,2015(4):140-143.
[14] 范云龙,张奇峰,张竺英. 深海五功能电动机械手误差建模与仿真[J]. 计算机仿真,2015,32(12):345-348,429.
FAN Yunlong,ZHANG Qifeng,ZHANG Zhuying. Error modeling and simulation of a deep-sea 5-function electric manipulator[J]. Computer Simulation,2015,32(12):345-348,429.
[15] RE2 Robotics. RE2 Sapien Robotic Arms[EB/OL]. (2021-06-10)[2021-07-06]. https://www.resquared.com/products.
[16] BLUEPRINT LAB. REACH ALPHA[EB/OL]. (2021-06-10)[2021-07-06]. https://blueprintlab.com/products/reach-alpha/.
[17] 南京华研动密封科技有限公司. 东麒L40水下机械手[EB/OL]. (2021-06-10)[2021-07-06]. http://www.huayanseal.com/cp_dql40jxb.
Nanjing Huayan seal Technology Co.Ltd. Dongqi L40 Underwater Manipulator[EB/OL]. (2021-06-10)[2021-07-06]. http://www.huayanseal.com/cp_dql40jxb.
[18] 李壮云. 液压元件与系统[M]. 北京:机械工业出版社,2019.
LI Zhuangyun. Hydraulic components and systems[M]. Beijing:China Machine Press,2019.
[19] GE's underwater manipulator shipped to oceaneering[J]. Ocean Engineering,1977,4(2):109.
[20] TechnipFMC. Manipulator systems[EB/OL]. (2021-06-10)[2021-07-06]. https://www.technipfmc.com/en/what-we-do/subsea/robotics/manipulator-systems/.
[21] Kraft Telerobotics. RAPTOR,Force Feedback Manipula-tor[EB/OL]. (2009-01-28)[2021-07-06]. http://www.krafttelerobotics.com/products/raptor.htm.
[22] Deep Ocean Exploration and Reaearch. DOER Sea Mantis 5 manipulators[EB/OL]. (2011-03-17)[2021-07-06]. https://www.doermarine.com/?p=748.
[23] HYDRO-LEK. HLK-50000[EB/OL]. (2021-06-10)[2021-07-06]. http://www.hydro-lek.com/manipulators.php.
[24] International Submarine Engineering Ltd. HYSUB Work Class ROVs[EB/OL]. (2021-06-10)[2021-07-06]. http://www.sharkmarine.com/products/rovs/sea-wolf-5/.
[25] Shark Marine Technologies Inc. Sea-Wolf 5:ROV[EB/OL]. (2021-06-10)[2021-07-06].https://ise.bc.ca/product/hysub/.
[26] 崔殿忠,曲刚,周国斌. 水下机械手液压控制系统动力机构参数的分析计算[J]. 机器人,1988(3):38-44.
CUI Dianzhong,QU Gang,ZHOU Guobin. Analysis and calculation of power mechanism parameters of hydraulic control system of underwater manipulator[J]. Robot,1988(3):38-44.
[27] 赵长福. 一种用于水下机器人的接触觉传感器[J]. 信息与控制,1985(2):44-47.
ZHAO Changfu. A touch sensor for underwater vehicles[J]. Information and Control,1985(2):44-47.
[28] ZHANG Qifeng,CHEN Jun,HUO Liangqing,et al. 7000m pressure experiment of a deep-sea hydraulic manipulator system[C]//Proceedings of OCEANS'14 MTS/IEEE St John's,St. John's,Canada:IEEE,2014:1-5.
[29] 刘涛,张奇峰,张运修,等. 水下大臂展机械手动力学建模与仿真分析[J]. 液压与气动,2021,45(5):25-32.
LIU Tao,ZHANG Qifeng,ZHANG Yunxiu,et al. Dynamic modeling and simulation analysis of underwater manipulator with large arms[J]. Chinese Hydraulics & Pneumatics,2021,45(5):25-32.
[30] 俞建成,张进,李伟. 基于事件相关电位的水下机械手脑电波控制[J]. 机器人,2017,39(4):395-404.
YU Jiancheng,ZHANG Jin,LI Wei. Controlling an underwater manipulator via event-related potentials of brainwaves[J]. Robot,2017,39(4):395-404.
[31] 张钰,张奇峰,孙斌. 水下机械手轨迹规划及控制仿真研究[J]. 计算机仿真,2016,33(8):306-310,368.
ZHANG Yu,ZHANG Qifeng,SUN Bin. Study on the Trajectory planning and control simulation of underwater manipulator[J]. Computer Simulation,2016,33(8):306-310,368.
[32] 王承禧. 可潜器的应急安全装置[J]. 海洋技术,1983(4):26-29.
WANG Chengxi. Emergency safety device for submersible vehicle[J]. Ocean Technology,1983(4):26-29.
[33] 茅及愚,张向明,徐国华,等. 兰鲸号潜器两型机械手的结构设计研究[J]. 海洋工程,1998(1):81-88.
MAO Jiyu,ZHANG Xiangming,XU Guohua,et al. Research on the structure design of the two manipulators equipped on Lanjing[J]. The Ocean Engineering,1998(1):81-88.
[34] 黄道敏,韩丽君,唐国元,等. 水下机械手分数阶积分滑模轨迹跟踪控制方法研究[J]. 中国机械工程,2019,30(13):1513-1518.
HUANG Daomin,HAN Lijun,TANG Guoyuan,et al. Fractional integral sliding mode control for trajectory tracking of underwater manipulators[J]. China Mechanical Engineering,2019,30(13):1513-1518.
[35] 肖治琥,徐国华. 流干扰下的水下机械手动力学建模分析[J]. 中国机械工程,2011,22(21):2521-2526.
XIAO Zhihu,XU Guohua. Study on dynamics of underwater manipulator under flow influences[J]. China Mechanical Engineering,2011,22(21):2521-2526.
[36] 常宗瑜,姚冰川,王磊,等. 水产养殖用水下移动机械手的耦合动力学分析[J]. 机械设计,2012,29(2):47-50.
CHANG Zongyu,YAO Bingchuan,WANG Lei,et al. Analysis of coupling dynamics of underwater mobile manipulator for aquaculture[J]. Journal of Machine Design,2012,29(2):47-50.
[37] 张喜超. 水下机器人-机械手系统动力学分析与控制[D]. 青岛:中国海洋大学,2011.
ZHANG Xichao. Dynamic analysis and control of underwater vehicle-manipulator system[D]. Qingdao:Ocean University of China,2011.
[38] 李冀永,万磊,黄海,等. SY-II水下机器人-机械手系统的协调运动控制[J]. 华中科技大学学报,2017,45(5):77-83.
LI Jiyong,WAN Lei,HUANG Hai,et al. Studies on coordinate motion control based on SY-II underwater vehicle manipulator system[J]. Journal of Huazhong University of Science and Technology,2017,45(5):77-83.
[39] 李金林. 水下机器人-机械手结构设计及自适应神经网络控制研究[D]. 哈尔滨:哈尔滨工程大学,2018.
LI Jinlin. Structure Design of underwater robot manipulator and research on adaptive neural network control[D]. Harbin:Harbin Engineering University,2018.
[40] 王刚,王法承,张星星,等. 核电站检修主从式水下作业机械手研究[J]. 高技术通讯,2017,27(5):442-449.
WANG Gang,WANG Facheng,ZHANG Xingxing,et al. Study on a master-slave underwater manipulatorfor nuclear power plant servicing[J]. Chinese High Technology Letters,2017,27(5):442-449.
[41] 杨超,张铭钧,秦洪德,等. 水下机器人-机械手姿态调节系统研究[J]. 哈尔滨工程大学学报,2018,39(2):377-383.
YANG Chao,ZHANG Mingjun,QIN Hongde,et al. Attitude control system for autonomous underwater vehicle-manipulator system[J]. Journal of Harbin Engine-ering University,2018,39(2):377-383.
[42] 杨帆. 水下机械手运动学与动力学控制关键问题研究[D]. 哈尔滨:哈尔滨工程大学,2019.
YANG Fan. Research on the key problems of kinematics and dynamics control based on underwater manipulator[D]. Harbin:Harbin Engineering University,2019.
[43] 宋琦. 基于扰动基座条件下水下机械手末端位姿控制研究[D]. 杭州:浙江大学,2019.
SONG Qi. Research on the terminal pose control of underwater manipulator under disturbance base[D]. Hangzhou:Zhejiang University,2019.
[44] 王尧尧,顾临怡,陈柏,等. 水下机器人-机械手系统非奇异终端滑模控制[J]. 浙江大学学报,2018,52(5):934-942,979.
WANG Yaoyao,GU Linyi,CHEN Bai,et al. Nonsingular terminal sliding mode control of underwater vehicle-manipulator system[J]. Journal of Zhejiang University,2018,52(5):934-942,979.
[45] 张艳. 深海水下液压机械手驱动系统压力适应型控制器研制[D]. 杭州:浙江大学,2012.
ZHANG Yan. Development of pressure adaptive controller for driving system of deep-sea underwater hydraulic manipulator[D]. Hangzhou:Zhejiang University,2012.
[46] 章艳. 压力适应型深海水下液压机械手及主从式多关节复合控制研究[D]. 杭州:浙江大学,2006.
ZHANG Yan. Research on pressure-adaptive deep-sea underwater hydraulic manipulator and its Master-slave multi-joint compound control[D]. Hangzhou:Zhejiang University,2006.
[47] 国家市场监督管理总局,中国国家标准化管理委员会. GB/T 36896.2-2018轻型有缆遥控水下机器人第2部分:机械手与液压系统[S]. 北京:中国标准出版社,2018.
State Administration for Market Regulation,standardization administration. GB/T 36896.2-2018 Light duty remotely operated vehicles. Part 2:Manipulators and hydraulic systems[S]. Beijing:Standards Press of China,2018.
[48] 杭州宇控机电工程有限公司. MA710A水下机械手[EB/OL]. (2021-06-10)[2021-07-06]. http://www.hzykjd.com/product-show.asp?id=61.
Hangzhou Universal Control Mechatronical Engineering LLC. MA710A Underwater Manipulator[EB/OL]. (2021-06-10)[2021-07-06]. http://www.hzykjd.com/product-show.asp?id=61.
[49] 刘银水,吴德发,李东林,等. 海水液压技术在深海装备中的应用[J]. 机械工程学报,2014,50(2):28-35.
LIU Yinshui,WU Defa,LI Donglin,et al. Applications of seawater hydraulics in deep-sea equipment[J]. Journal of Mechanical Engineering,2014,50(2):28-35.
[50] 杨华勇,周华. 水液压技术研究新进展[J]. 液压与气动,2013(2):1-6.
YANG Huayong,ZHOU Hua. New achievements in water hydraulics[J]. Chinese Hydraulics & Pneumatics,2013(2):1-6.
[51] ISHIMI K,OHTSUKI Y,Manabe T,et al. Manipulation system for subsea operation[C]//Fifth International Conference on Advanced Robotics'Robots in Unstructured Environments,Pisa,Italy:IEEE,1991:1348-1353.
[52] YOSHINADA H,YAMAZAKI T,ELECTRIC I O,et al. Seawater hydraulic actuator system for underwater manipulator[C]//Fifth International Conference on Advanced Robotics' Robots in Unstructured Environments,Pisa,Italy:IEEE,1991:1330-1335.
[53] SIUKO M,PITKAEAHO M,RANEDA A,et al. Water hydraulic actuators for ITER maintenance devices[J]. Fusion Engineering and Design,2003,69(1):141-145.
[54] NIEMINEN P,ESQUE S,MUHAMMAD A,et al. Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER[J]. Fusion Engineering and Design,2009,84(7):1420-1424.
[55] KEKALAINEN T,MATTILA J,VIRVALO T. Development and design optimization of water hydraulic manipulator for ITER[J]. Fusion Engineering and Design,2009,84(2):1010-1014.
[56] GRAVEZ P,LEROUX C,IRVING M,et al. Model-based remote handling with the MAESTRO hydraulic manipulator[J]. Fusion Engineering and Design,2003,69(1):147-152.
[57] DUBUS G,DAVID O,NOZAIS F,et al. Assessment of a water hydraulic joint for remote handling operations in the divertor region[J]. Fusion Engineering and Design,2008,83(10):1845-1849.
[58] WU Huapeng,HANDROOS H,PESSI P,et al. Development and control towards a parallel water hydraulic weld/cut robot for machining processes in ITER vacuum vessel[J]. Fusion Engineering and Design,2005,75(1):625-631.
[59] 王亚猛. 水液压驱动的水下机械臂PWM鲁棒控制研究[D]. 武汉:华中科技大学,2011.
WANG Yameng. Research on the PWM robust control of water hydraulic underwater manipulator[D]. Wuhan:Huazhong University of Science and Technology,2011.
[60] 赵克楠. 水液压驱动的水下机械手及其模糊PID控制方法研究[D]. 哈尔滨:哈尔滨工程大学,2014.
ZHAO Kenan. Research on water hydraulic underwater manipulator and fuzzy PID control[D]. Harbin:Harbin Engineering University,2014.
[61] 马小委. 水下水液压机械手系统设计及位置测量技术研究[D]. 哈尔滨:哈尔滨工程大学,2015.
MA Xiaowei. Research on underwater water-hydraulic manipulator system and position measuring technology[D]. Harbin:Harbin Engineering University,2015.
[62] 刘晓鹏,聂松林,纪辉,等. 音圈电机直驱高速开关阀动态特性研究[J]. 液压与气动,2020(3):37-44.
LIU Xiaopeng,NIE Songlin,JI Hui,et al. Dynamic characteristics for the voice coil motor direct-driven high-speed on-off valve[J]. Chinese Hydraulics & Pneumatics,2020(3):37-44.
[63] 申文强,聂松林,尹方龙,等. 一种新型低速大扭矩水液压马达结构设计及仿真分析[J]. 液压与气动,2019(6):17-21.
SHEN Wenqiang,NIE Songlin,YIN Fanglong,et al. Structure design and simulation analysis of a new type low-speed large-torque water hydraulic motor[J]. Chinese Hydraulics & Pneumatics,2019(6):17-21.
[64] 杨宏磊. 水压阀控摆动缸驱动单关节机械臂关键技术研究[D]. 北京:北京工业大学,2018.
YANG Honglei. Research on key technology of the water hydraulic valve controlled the vane actuator driving single joint manipulator[D]. Beijing:Beijing University of Technology,2018.
[65] NIE Songlin,LIU Xiaopeng,JI Hui,et al. Simulation and experiment study on deformation characteristics of the water hydraulic flexible actuator used for the underwater gripper[J]. IEEE Access,2020,8:191447-191459.
[66] 姜英昌,于正河,段雅静,等. 水下机器人技术专利信息分析[J]. 青岛大学学报,2020,33(3):8-14.
JIANG Yingchao,YU Zhenghe,DUAN Yajing,et al. Patent information analysis of underwater robot technology[J]. Journal of Qingdao University,2020,33(3):8-14.
[67] 马浩,高殿荣,毋少峰,等. 水压马达仿生非光滑表面配流副摩擦磨损研究[J]. 机械工程学报,2018,54(13):142-152.
MA Hao,GAO Dianrong,WU Shaofeng,et al. Experimental study on friction-wear for valve plate with bionic non-smooth surface of hydraulic motor[J]. Journal of Mechanical Engineering,2018,54(13):142-152.
[68] SHAN Zeyin,YUAN Ruibo,LI Chao. The simulation and analysis on leakage flow rate of plunger pair of plunger water hydraulic motor[J]. Applied Mechanics and Materials,2015,3867(1558):62-67.
[69] 王悦昶,刘莹,黄伟峰,等. 混合润滑理论模型进化与工程应用[J]. 摩擦学学报,2016,36(4):520-530.
WANG Yuechang,LIU Ying,HUANG Weifeng,et al. The progress and engineering application of theoretical model for mixed lubrication[J]. Tribology,2016,36(4):520-530.
[70] 黄晓艳,刘源,刘波. 复合材料在舰船上的应用[J]. 江苏船舶,2008(2):13-17.
HUANG Xiaoyan,LIU Yuan,LIU Bo. Application of composite materials on naval vessels[J]. Jiangsu Ship,2008(2):13-17.
[71] 吴始栋. 美国舰艇用结构钢的开发与应用研究[J]. 上海造船,2006(4):57-60.
WU Shidong. Development and applied research of naval vessels structure steel in USA[J]. Shanghai Shipbuilding,2006(4):57-60.
[72] 崔立. 铝合金舰船结构设计中相关问题探讨[J]. 船海工程,2008,37(6):36-37.
CUI Li. Some problems about the aluminium alloy ships[J]. Ship & Ocean Engineering,2008,37(6):36-37.
[73] 赵勇,李敬勇,严铿. 铝合金在舰船建造中的应用与发展[J]. 船舶物资与市场,2005(2):28-30.
ZHAO Yong,LI Jingyong,YAN Keng. Application and development of aluminum alloy in shipbuilding[J]. Marine Equipment/Materials & Marketing,2005(2):28-30.
[74] 杨英丽,罗媛媛,赵恒章,等. 我国舰船用钛合金研究应用现状[J]. 稀有金属材料与工程,2011,40(增刊2):538-544.
YANG Yingli,LUO Yuanyuan,ZHAO Hengzhang,et al. Research and application status of titanium alloys for warships in China[J]. Rare Metal Materials and Engineering,2011,40(Suppl.2):538-544.
[75] BARBALATA C,DUNNIGAN M W,PETILLOT Y. Coupled and decoupled force/motion controllers for an underwater vehicle-manipulator system[J]. Journal of Marine Science and Engineering,2018,6(3):96.
[76] ISMAIL Z H,DUNNIGAN M W. Tracking control scheme for an underwater vehicle-manipulator system with single and multiple sub-regions and sub-task objectives[J]. IET Control Theory & Applications,2011,5(5):721-735.
[77] THOR I. F. Handbook of marine craft hydrodynamics and motion control[M]. New Jersey:John Wiley & Sons Inc, 2011.
[78] XIAO Zhihu,XU Guohua,PENG Fuyuan,et al. Development of a deep ocean electric autonomous manipulator[J]. China Ocean Engineering,2011,25(1):159-168.
[79] 高涵,张明路,张小俊,等. 水下机械手动力学模型及力矩影响研究[J]. 机械设计与制造,2017(3):68-71.
GAO Han,ZHANG Minglu,ZHANG Xiaojun,et al. Research on underwater manipulator dynamics model and torque influence[J]. Machinery Design & Manufacture,2017(3):68-71.
[80] 林江. 水下电动机械手动力学分析及仿真[J]. 四川兵工学报,2010,31(6):52-55.
LIN Jiang. Dynamic analysis and simulation of underwater electric manipulator[J]. Journal of Sichuan Ordnance,2010,31(6):52-55.
[81] 王懿,张爱霞,郭瑞岩,等. 六自由度水下机械臂动力学模型及流阻影响研究[J]. 北京理工大学学报,2020,40(11):1143-1149.
WANG Yi,ZHANG Aixia,GUO Ruiyan,et al. Dynamic model of 6-DOF underwater manipulator and its influence of flow resistance[J]. Transactions of Beijing Institute of Technology,2020,40(11):1143-1149.
[82] 丛明,刘毅,李泳耀,等. 水下捕捞机器人的研究现状与发展[J]. 船舶工程,2016,38(6):55-60.
CONG Ming,LIU Yi,LI Yongyao,et al. Research and development of underwater fishing robot[J]. Ship Engineering,2016,38(6):55-60.
[83] LEABOURNE K N,ROCK S M. Model development of an underwater manipulator for coordinated arm-vehicle control[C]//OCEANS'98 Conference Proceedings. Nice,France:IEEE,1998:941-946.
[84] SANTHAKUMAR M. Proportional-derivative observer-based backstepping control for an underwater mnipulator[J]. Mathematical Problems in Engineering:Theory,Methods and Applications,2011,2011:1-18.
[85] JUMARS P A. Spatial autocorrelation with RUM (Remote Underwater Manipulator):Vertical and horizontal structure of a bathyal benthic community[J]. Deep Sea Research,1978,25(7):589-604.
[86] 吴忠强,朴春俊. 模型参考自适应控制理论发展综述[J]. 信息技术,2000(7):33-35.
WU Zhongqiang,PIAO Chunjun. Review on the development of model reference adaptive control theory[J]. Information Technology,2000(7):33-35.
[87] 葛新成,胡永霞. 模糊控制的现状与发展概述[J]. 现代防御技术,2008,36(3):51-55.
GE Xincheng,HU Yongxia. Present analysis and development trends of fuzzy control techniques[J]. Modern Defence Technology,2008,36(3):51-55.
[88] 孙林军. 智能PID控制研究[D]. 杭州:浙江工业大学,2003.
SUN Linjun. Study on intelligent PID control[D]. Hangzhou:Zhejiang University of Technology,2003.
[89] 王立权,王春林,杜维杰,等. 基于Fuzzy-PID的水下作业机械手控制系统设计[J]. 液压与气动,2005(1):27-31.
WANG Liquan,WANG Chunlin,DU Weijie,et al. Design of hydraulic control system for an underwater manipulator based on Fuzzy-PID[J]. Chinese Hydraulics & Pneumatics,2005(1):27-31.
[90] XU Guohua,XIAO Zhihu,GUO Ying,et al. Trajectory tracking for underwater manipulator using sliding mode control[C]//2007 IEEE International Conference on Robotics and Biomimetics (Robio 2007). Sanya,China:IEEE,2007:2127-2132.
[91] 曾克俭,李光. 时变边界层滑模控制在多连杆机械手的应用[J]. 机械与电子,2007(2):3-5.
ZENG Kejian,LI Guang. Application of sliding mode control with time-varying boundary layer in multi-link manipulators[J]. Machinery & Electronics,2007(2):3-5.
[92] 黄清海,王成军,刘晓华,等. 水下机械手自适应控制技术研究[J]. 机床与液压,2010,38(24):80-82.
HUANG Qinghai,WANG Chengjun,LIU Xiaohua,et al. Research on adaptive control technology of underwater manipulator[J]. Machine Tool & Hydraulics,2010,38(24):80-82.
[93] 张建军,刘卫东,李乐,等. 未知环境下水下机械手智能抓取的自适应阻抗控制[J]. 上海交通大学学报,2019,53(3):341-347.
ZHANG Jianjun,LIU Weidong,LI Le,et al. Adaptive impedance control for underwater manipulator intelligent grasping in unknown environment[J]. Journal of Shanghai Jiaotong University,2019,53(3):341-347.
[94] 秦绪平,谭国俊. 模糊控制理论的发展应用与展望[J]. 控制工程,2005(增刊2):137-139.
QIN Xuping,TAN Guojun. Development and prospect of fuzzy control theory[J]. Control Engineering of China,2005(Suppl.2):137-139.
[95] 袁凯. 水下电动机械臂设计及运动控制方法研究[D]. 济南:山东大学,2020.
YUAN Kai,Research on design and motion control method of underwater electric manipulator[D]. Jinan:Shandong University,2020.
[96] 蔺世杰,郑少梅,车清论,等. 海水环境中聚合物防腐抗磨复合涂层[J]. 塑料,2020,49(3):146-150.
LIN Shijie,ZHENG Shaomei,CHE Qinglun,et al. Wear and corrosion resistance of polymer nanocoatings subjected to seawater lubrication[J]. Plastics,2020,49(3):146-150.
[97] 陈晓彤,王鹏,张盾. 仿生超疏水表面在海洋腐蚀防护中的应用[J]. 装备环境工程,2018,15(10):1-7.
CHEN Xiaotong,WANG Peng,ZHANG Dun. Applications of bioinspired super-hydrophobic surfaces on marine corrosion and protection[J]. Equipment Environmental Engineering,2018,15(10):1-7.
[98] 张昊. 自修复仿生超滑表面的制备及其对海洋生物污损的影响[D]. 北京:中国科学院大学(中国科学院海洋研究所),2018.
ZHANG Hao. Preparation ofself-healable organogel and its impact on marine biofouling[D]. Beijing:University of Chinese Academy of Sciences(Institute of Oceanology,CAS),2018.
[99] CAO Wentao,LIU Yanjun,MA Mingguo,et al. Facile preparation of robust and superhydrophobic materials for self-cleaning and oil/water separation[J]. Colloids and Surfaces,A Physicochemical and Engineering Aspects,2017,529:18-25.
[100] 李广浩,冯娜,刘贵杰. 基于仿生鱼体结构的平板减阻方法[J]. 水下无人系统学报,2021,29(1):80-87.
LI Guanghao,FENG Na,LIU Guijie. Flat drag reduction method based on biomimetic fish-body structure[J]. Journal of Unmanned Undersea Systems,2021,29(1):80-87