Research on Characteristic of Test Specimen for Five-axis CNCMachine Tools

doi:10.3901/JME.2017.01.101

Abstract

Abstract: Test specimen usually applied on checking dynamic precision of machine tools, but the performances of machine tools based on specimen cutting are still indeterminate. The modelings of four common test specimens for five-axis CNC machine tools are analyzed firstly. Then some important geometric features including the curvature, open-close angle, twisted angle of each specimen are studied. Next, the sudden change positions of acceleration on each axis are obtained during processing. So the various geometric characteristics are the key to test function of specimens. Finally, the superiority of Chinese “S” specimen is verified by the cutting experiments. The analysis results can be used to set up the relationship between test specimen and machine’s dynamic performance, and contributed to the machine’s error identification and traceability.

Key words: geometric characteristics, processing characteristics, test specimen, five-axis CNC machine tools

WANG Wei, TAO Wenjian, LI Qingzhao. Research on Characteristic of Test Specimen for Five-axis CNCMachine Tools[J]. Journal of Mechanical Engineering, 2017, 53(1): 101-109.

References

[1] ANDOLFATTOA L，LAVERNHE S，MAYER J. Evaluation of servo，geometric and dynamic error sources on five-axis high-speed machine tool[J]. International Journal of Machine Tools and Manufacture，2011，51(10-11)：787-796.

[2] 粟时平，李圣怡. 基于空间误差模型的加工中心几何误差辨识方法[J]. 机械工程学报，2002，38(7)：121-122.

SU Shiping，LI Shengyi. Identification method for errors of machining center based on volumetric error model[J]. Chinese Journal of Mechanical Engineering，2002，38(7)：121-122.

[3] 蔡晓华，杜正春. 五轴数控机床的运动精度诊断评述[J].机床与液压，2013(21)：149-152，85.

CAI Xiaohua，DU Zhengchun. Error motion diagnosis and review for 5-axis machine tool[J]. Machine Tool and Hydraulics，2013(21)：149-152，85.

[4] 仇健. 数控机床切削性能测试典型试件综述[J]. 制造技术与机床，2014(9)：193-203.

QIU Jian. Review on typical part for cutting test of NC machining centre[J]. Manufacturing Technology and Machine Tool，2014(9)：193-203.

[5] NAS979. Uniform cutting test-NAS series，metal cutting equipment[R]. Washigton，USA：NAS，1969.

[6] 杜丽，张信，王伟，等.“S”形试件的五轴数控机床综合动态精度检测特性研究[J]. 电子科技大学学报，2014(4)：629-635.

DU Li，ZHANG Xin，WANG Wei，et al. Research on properties of “S” shaped test piece on synthesis dynamic accuracy detection of five-axis CNC machine tools[J]. Journal of University of Electronic Science and Technology of China，2014(4)：629-635.

[7] UTSUMI K，KOSUGI T，SAITO A，et al. Measurement method of geometric accuracy of five-axis controlled machining centers[J]. Japan Society of Mechanical Engineering，2006，73(719)：2293-2298.

[8] TSUTSUMI M，YUMIZA D，UTSUMI K.Evaluation of synchronous motion in five-axis machining centers with a tilting rotary table[J].Journal of Advanced Mechanical

Design，Systems and Manufacturing，2007，1(1)：24-35.

[9] SONG Zhiyong，CUI Yawen. S-shape detection test piece and a detection method for detecting the precision of the numerical control milling machine：USA，US52306208A[P]. 2008-01-11.

[10] 施法中. 计算机辅助几何设计及非均匀有理B样条[M].北京：高等教育出版社，2001.

SHI Fazhong. CAGD & NURBS[M]. Beijing：Higher Education Press，2001.

[11] 宋玉旺. 完全掌握UG NX8.5超级手册[M]. 北京：机械工业出版社，2014.

SONG Yuwang. Grasp UG NX8.5 super manual completely[M]. Beijing：China Machine Press，2014.

[12] 梅向明，黄敬之. 微分几何[M]. 4版. 北京：高等教育出版社，2008.

MEI Xiangming，HUANG Jingzhi. Differential geometry[M]. 4 th ed. Beijing：Higher Education Press，2008.

[13] RAO V，RAO P. Effect of workpiece curvature on cutting forces and surface error in peripheral milling[J]. Proceedings of the Institution of Mechanical Engineers. Part B：Engineering Manufacture，2006，220(9)：1399-1407.

[14] ZHU Haiguang，LIU Riliang. A combined approach to tool path generation for flank milling of impeller blades with non–developable ruled surfaces[J]. International Journal of Manufacturing Research，2015，10(1)：1-16.

[15] 蔡永林，席光，查建中. 任意扭曲直纹面叶轮数控侧铣刀位计算与误差分析[J]. 西安交通大学学报，2004，38(5)：517-520.

CAI Yonglin，XI Guang，CHA Jianzhong. Calculation of cutter-location and error analysis in numerical control flank milling of twisted ruled surface impeller[J]. Journal of Xi’an Jiaotong University，2004，38(5)：517-520.