Comprehensive Energy Saving Optimization of Processing Parameters and Job Shop Dynamic Scheduling Considering Disturbance Events

doi:10.3901/JME.2022.19.242

Abstract

Abstract: As energy consumption and environmental problems continue to intensify, efficient and energy saving production in machining job shops has attracted more and more attention from the manufacturing industry. In traditional dynamic scheduling optimization, the processing parameters of each operation are fixed, and the relationship between processing parameters and job shop scheduling is not considered, which limits the potential of scheduling optimization. In order to better realize the energy saving and efficiency increase of the flexible job shop, and quickly and effectively deal with the sudden disturbance events, a comprehensive optimization method of processing parameters and job shop dynamic scheduling considering disturbance events is proposed. Firstly, the energy consumption characteristics of the flexible job shop under new job arrival and machine tool breakdown are explained in detail, and the comprehensive optimization model of processing parameters and dynamic scheduling is established with the objectives of total energy consumption and maximum completion time. Then, the dynamic decision-making mechanism for disturbance events is designed, and the improved adaptive geometry estimation based multi-objective evolutionary algorithm (AGE-MOEA) is proposed. Finally, the effectiveness of the proposed method is verified by case analysis and algorithm comparison.

Key words: energy saving, disturbance event, processing parameter, dynamic scheduling, flexible job shop

CLC Number:

TH162

Lü Yan, XU Zhengjun, LI Congbo, LI Lingling, YANG Miao. Comprehensive Energy Saving Optimization of Processing Parameters and Job Shop Dynamic Scheduling Considering Disturbance Events[J]. Journal of Mechanical Engineering, 2022, 58(19): 242-255.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2022.19.242

http://www.cjmenet.com.cn/EN/Y2022/V58/I19/242

References

[1] TRIEBE M J，ZHAO F，SUTHERLAND J W. Genetic optimization for the design of a machine tool slide table for reduced energy consumption[J]. Journal of Manufacturing Science and Engineering-Transactions of the ASME，2021，143(10):101003.
[2] PAPETTI A，MENGHI R，DOMIZIO G D，et al. Resources value mapping:A method to assess the resource efficiency of manufacturing systems[J]. Applied Energy，2019，249:326-342.
[3] ZHAO J，LI L，YUE W，et al. Impact of surface machining complexity on energy consumption and efficiency in CNC milling[J]. International Journal of Advanced Manufacturing Technology，2019，102:2891-2905.
[4] 孟磊磊，张超勇，邵新宇，等. 面向节能的工艺规划与调度集成问题建模研究[J]. 机械工程学报，2019，55(16):185-196. MENG Leilei，ZHANG Chaoyong，SHAO Xinyu，et al. Mathematical modeling of energy-efficient integration of process planning and scheduling[J]. Journal of Mechanical Engineering，2019，55(16):185-196.
[5] KARA S，LI W. Unit process energy consumption models for material removal processes[J]. CIRP Annals- Manufacturing Technology，2011，60(1):37-40.
[6] LI L，LI C，TANG Y，et al. An integrated solution to minimize the energy consumption of a resource- constrained machining system[J]. IEEE Transactions on Automation Science and Engineering，2020，17(3):1158-1175.
[7] WANG Y C，WANG M J，LIN S C. Selection of cutting conditions for power constrained parallel machine scheduling[J]. Robotics and Computer-Integrated Manufacturing，2017，43:105-110.
[8] TIAN C，ZHOU G，LU F，et al. Cooperative optimization of cutting parameters，process routes，and scheduling considering carbon emissions with analytic target cascading[J]. International Journal of Advanced Manufacturing Technology，2021，114(1):1-19.
[9] ZHANG Y，LIU Q，ZHOU Y，et al. Integrated optimization of cutting parameters and scheduling for reducing carbon emissions[J]. Journal of Cleaner Production，2017，149:886-895.
[10] 刘琼，周迎冬，张漪. 面向低碳的切削参数与调度集成优化[J]. 机械工程学报，2017，53(5):24-33. LIU Qiong，ZHOU Yingdong，ZHANG Yi. Integrated optimization of cutting parameters and scheduling for reducing carbon emissions[J]. Journal of Mechanical Engineering，2017，53(5):24-33.
[11] ZHANG F，MEI Y，SU N，et al. Evolving scheduling heuristics via genetic programming with feature selection in dynamic flexible job-shop scheduling[J]. IEEE Transactions on Cybernetics，2020，99:1-15.
[12] BAYKASOĞLU A，MADENOĞLU F S. Greedy randomized adaptive search procedure for simultaneous scheduling of production and preventive maintenance activities in dynamic flexible job shops[J]. Soft Computing，2021，25(23):14893-14932.
[13] ZADEH M S，KATEBI Y，DONIAVI A. A heuristic model for dynamic flexible job shop scheduling problem considering variable processing times[J]. International Journal of Production Research，2019，57(10):3020-3035.
[14] LUO S. Dynamic scheduling for flexible job shop with new job insertions by deep reinforcement learning[J]. Applied Soft Computing，2020，91:106208.
[15] CHEN X，LI C，TANG Y，et al. Energy efficient cutting parameter optimization[J]. Frontiers of Mechanical Engineering，2021，16(2):221-248.
[16] LI C，LI L，TANG Y，et al. A comprehensive approach to parameters optimization of energy-aware CNC milling[J]. Journal of Intelligent Manufacturing，2019，30:123-138.
[17] PANICHELLA A. An adaptive evolutionary algorithm based on non-Euclidean geometry for many-objective optimization[C]// Proceedings of the Genetic and Evolutionary Computation Conference. New York:ACM，2019:595-603.
[18] KRÖMER P，UHER V，SNÁŠEL V. Novel random key encoding schemes for the differential evolution of permutation problems[J]. IEEE Transactions on Evolutionary Computation，2021，26(1):43-57.
[19] XIAO Q，LI C，TANG Y，et al. A knowledge-driven method of adaptively optimizing process parameters for energy efficient turning[J]. Energy，2019，166:142-156.