SIMPLIFIED MECHANICAL MODEL OF HELICOPTER CRASHWORTHINESS DESIGN

Abstract

Abstract: Based on the study of the mechanical behavior of helicopter structures, including both experiment and FEM analysis, a simplified mechanical model for helicopter crashworthiness design, which can be used to predict the maximum impact force in the crash procedure and design some energy-absorption components, is proposed. The dynamic response of a helicopter with initial speed 10.2 m/s vertically impinged at the ground is calculated. The ratio of the dissipated energy absorbed by the landing gear to the total input energy and the kinetic energy decreasing curve of the fuselage during impact process are obtained. The comparison between the theoretical results and FEM results is reasonable agreement.

Key words: Crashworthiness, Helicopter, Theoretical model

CLC Number:

V275 O341

Yang Jialing;Wu Weihua;Liu Xuhong;Feng Deqiang. SIMPLIFIED MECHANICAL MODEL OF HELICOPTER CRASHWORTHINESS DESIGN[J]. , 2003, 39(12): 109-113.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2003/V39/I12/109

[1]	CHEN Gangli, YU Liqing, CUI Hailong, LIU Cong, CHEN Kaiqiang. Optimization Design for the Oil Film Stiffness of Self-compensated Hydrostatic Slideway with Three-slot Structures [J]. Journal of Mechanical Engineering, 2025, 61(5): 26-39.
[2]	LIN Yanli, WANG Jiaming, LIU Junpeng, SU Yibo, WANG Shuo, HE Zhubin. Theoretical Model for Quantitative Prediction of Earing Profile in Deep Drawing of Sheet Metal Cup-shaped Parts [J]. Journal of Mechanical Engineering, 2025, 61(4): 96-106.
[3]	XU Weiyun, ZHANG Hanyu, LIU Zhao, ZHU Ping. Aperiodic Design Framework of Chiral Mechanical Metamaterials Considering Crashworthiness [J]. Journal of Mechanical Engineering, 2025, 61(17): 266-280.
[4]	DENG Gongxun, XU Tuo, HU Zhengsheng, PENG Yong. Experimental Study on Occupant Secondary Impact Injury for High-speed Trains [J]. Journal of Mechanical Engineering, 2025, 61(15): 314-323.
[5]	ZHANG Chenchen, CHEN Yi, LI Sheng, RUAN Jian. Research on Oil Stirring Loss Torque for Cam Guide Rail of Roller Piston Pump [J]. Journal of Mechanical Engineering, 2025, 61(14): 306-320.
[6]	SUN Wei, WANG Peijun, CHEN Junyun, DUAN Chunzheng. Research on Particle Damage during SiCp/Al Composite Machining [J]. Journal of Mechanical Engineering, 2023, 59(15): 366-376.
[7]	WANG Jianwei, LI Hang, WU Yuanhui, FAN Jiahui, FENG Kai. Performance Analysis and Test Verification of Porous Tilting Pad Bearings with Hermetically Sealed Squeeze Film Damper in Parallel [J]. Journal of Mechanical Engineering, 2023, 59(1): 151-161.
[8]	JIANG Shijie, CHEN Pifeng, HU Ke, ZHAN Yang, LI Changyou. Theoretical and Experimental Study on the Bonding Neck of Fused Filament Fabrication Parts [J]. Journal of Mechanical Engineering, 2022, 58(9): 291-297.
[9]	WANG Long, WANG Liuying, TANG Xiujian, YANG Nengjun, LIU Gu, LI Ruoting, YOU Yinfeng. Construction and Analysis of Grinding Temperature Model for Gear Processed by Form Grinding Technology [J]. Journal of Mechanical Engineering, 2022, 58(3): 295-304.
[10]	CHEN Chaoyi, LU Juan, CHEN Kai, LI Yujia, MA Junyan, LIAO Xiaoping. Research on Analytical Model and DDQN-SVR Prediction Model of Turning Surface Roughness [J]. Journal of Mechanical Engineering, 2021, 57(13): 262-272.
[11]	ZHAO Changcai, YUAN Rongjuan, HAO Haibin, HU Limei, JIA Xiangdong. Theoretical Calculation and Numerical Simulation on Roller Die Drawing Force of High Pressure Cylinder [J]. Journal of Mechanical Engineering, 2020, 56(4): 49-56.
[12]	YUAN Xiaoming, WANG Chu, ZHU Xuan, ZHANG Lijie. Research on Theoretical Model of Dynamic Bulk Modulus of Elasticity of Gas-liquid Mixed Fluid [J]. Journal of Mechanical Engineering, 2020, 56(4): 209-217.
[13]	LIU Fengjia, TANG Zhao, ZHANG Jianjun. Holistic Topology-parameter Optimization Method for the Rail Vehicle End Structure [J]. Journal of Mechanical Engineering, 2020, 56(20): 134-145.
[14]	YUAN Xiaoming, WANG Chu, ZHAO Shiyi, ZHANG Lijie. Investigation on Bulk Elastic Modulus of Air and Liquid Mixing Fluid [J]. Journal of Mechanical Engineering, 2019, 55(10): 226-232.
[15]	JIA Xiangdong, ZHAO Changcai, HE Liuyang, LI Jianchao, CAO Miaoyan, MO Chen. Analytic Methods of Flange Deformation Region in Axisymmetrical Drawing Process [J]. Journal of Mechanical Engineering, 2017, 53(8): 50-57.

SIMPLIFIED MECHANICAL MODEL OF HELICOPTER CRASHWORTHINESS DESIGN

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments