RESEARCH ON MECHANICAL PROPERTIES AND MICROSTRUCTURES OF TiAl/40Cr JOINT OBTAINED BY INDUCTION BRAZING METHOD

Abstract

Abstract: TiAl and 40Cr is induction brazed with Ag-Cu-Ti filler metal in a vacuum furnace. The microstructure and mechanical properties of the joints is studied. The kinds of formation phases and the interface structures of the joints are investigated by scanning electron microscopy (SEM), electron probe microanalysis (EPMA) and X-ray diffraction (XRD), the joint strength is determined by tensile testing method and the microhardness of the formation phases is tested. Results show that three formation phases, TiAl3, Ag[s,s], Ti(Cu,Al)2, have occurred in the brazing seam. The interface structure of the joints brazed at 1 143~1 183 K can be described as TiAl / TiAl3/ TiAl3+Ag[s,s]/Ti(Cu,Al)2 + Ag[s,s] / Ag[s,s] + Ag-Cu eutectic phase / 40Cr and the interface structure of the joints brazed at 1 223 K can be described as TiAl / Ti(Cu,Al)2+ some Ag[s,s] / Ag[s,s]+ Ag-Cu eutectic phase / 40Cr. An excellent joint tensile strength as high as 267 Mpa is obtained when induction brazed at 1 143 K for 5 min.

Key words: 40Cr, Induction brazing, Interface structure, Tensile strength, TiAl

CLC Number:

TG454

Li Yulong;He Peng;Feng Jicai;Yan Jiuchun. RESEARCH ON MECHANICAL PROPERTIES AND MICROSTRUCTURES OF TiAl/40Cr JOINT OBTAINED BY INDUCTION BRAZING METHOD[J]. , 2005, 41(10): 93-96.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2005/V41/I10/93

[1]	WANG Kang, ZHUANG Weichao, QIU Zhaoyu, LI Bingbing, CHENG Kun, WANG Yanlin, YIN Guodong. Research on the Dynamic Mechanism and Non-cooperative Game Control Strategy for Compass Steering of Distributed Drive Electric Vehicles [J]. Journal of Mechanical Engineering, 2026, 62(8): 259-271.
[2]	YANG Yinru, GAO Hang, TIAN Yachuang, LIU Jianbao. Experimental Study on Ultrasonic Welding Technology of High Temperature Resistant Thermoplastic Carbon Fiber Composites [J]. Journal of Mechanical Engineering, 2026, 62(5): 297-305.
[3]	GAN Lei, WANG Chengjun, LI Lei, XU Hongmeng, WU Jun, HUANG Haihong. Data Spatial Blending Strategy Based Stamping Process Energy Map for Monitoring the Part Forming Quality [J]. Journal of Mechanical Engineering, 2026, 62(5): 374-389.
[4]	ZHAO Mingjie, LU An, HUANG Liang, JIANG Lihong, LI Jianjun, GUO Zhenghua. Influence of Austenitizing Temperature on the Hot Deformation Behaviors of High-strength Steel [J]. Journal of Mechanical Engineering, 2026, 62(5): 390-398.
[5]	FENG Kaixuan, WANG Lu, SHI Yayun. Sequential Decoupling Method for Solving the Failure Possibility Bounds under Interval and Fuzzy Hybrid Uncertainties [J]. Journal of Mechanical Engineering, 2026, 62(4): 392-399.
[6]	ZHANG Zhiyong, JIANG Zhihao, HU Lin, HUANG Caixia. Improved Artificial Potential Field Modeling and Dynamic Obstacle Avoidance Path Planning for Continuous Curves [J]. Journal of Mechanical Engineering, 2026, 62(2): 271-282.
[7]	LI Taotao, LING Liang, LIU Jianxin. Research on Control Strategy of Differential Active Steering Control of Independent Rotating Wheels [J]. Journal of Mechanical Engineering, 2026, 62(2): 301-312.
[8]	BAI Yuzhu, GUO Fei, MUHAMMAD Imran, SUO Shuangfu, JIA Xiaohong. Research on Contact Stiffness of 40Cr Steel Grinding Joint Surface [J]. Journal of Mechanical Engineering, 2026, 62(1): 384-394.
[9]	LI Yongquan, HAO Qingrui, LIANG Guodong, WANG Cunxi, GAO Yang. Microstructure and High Temperature Oxidation Properties of Al-Y Co-deposition Coating on TiAl Alloy [J]. Journal of Mechanical Engineering, 2025, 61(4): 137-146.
[10]	GUO Jing, WANG Liming, QI Jin, HU Jie, KONG Lin. Modeling and Optimization Decision of Green Design Scheme of Product Integrating Scenario [J]. Journal of Mechanical Engineering, 2025, 61(3): 40-51.
[11]	XIAO qian, Cui zhengchun, XU Zhongxu, SHEN Yue. Research on The Effect of Wheel Wear on Equivalent Conicity of High-Speed Trains [J]. Journal of Mechanical Engineering, 2025, 61(24): 339-350.
[12]	AN Xiaokang, JIA Qingxuan, CHEN Gang, LIU Yuqiang, LIU Huawei. Morphological Design and Performance Analysis of a Self-reconfigurable Modular Robot for Multi-task Space Applications [J]. Journal of Mechanical Engineering, 2025, 61(21): 152-167.
[13]	ZHANG Ying, LI Shanshan, SHAN Deke, SHI Yuan, BAI Bofeng. Online Measurement of Gas and Liquid Two-phase Flow Rates in Wet Gas Based on Dimensionless Pressure Loss Coefficient [J]. Journal of Mechanical Engineering, 2025, 61(20): 174-181.
[14]	YIN Wenliang, WANG Yue, LIU Lin, ZHANG Wenhua, WANG Ziwei, RUI Xiaoming. Operation Characteristics and Experimental Investigation of Wind Turbine with the Self-stabilizing Speed Regulating Differential Mechanism [J]. Journal of Mechanical Engineering, 2025, 61(2): 321-329.
[15]	WEN Shikun, JI Aihong, LEE Heow Pueh, CHE Linxian, YANG Zhikang. Improvement of Differential Evolution Algorithm for Solving the Multi-root in Forward Kinematic Equations of Parallel Mechanisms [J]. Journal of Mechanical Engineering, 2025, 61(19): 43-53.

RESEARCH ON MECHANICAL PROPERTIES AND MICROSTRUCTURES OF TiAl/40Cr JOINT OBTAINED BY INDUCTION BRAZING METHOD

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments