New Method for Evaluating Arbitrary Spatial Straightness Error

Abstract

Abstract: Because of the disadvantages in evaluating spatial straightness error with traditional method, such as difficulty in solving the nonlinear simultaneous equation, the evaluating precision is lower and data processing can’t be automated. New method for evaluating arbitrary spatial straightness error is put forward. The particular data processing method and evaluating method are put forward, and the feasibility of method is validated by practical measurement. The result indicates that the method is simple and easy for automatic data processing by computer, and the evaluating precision is enhanced by 5% compared to the traditional method.

Key words: Evaluating method, Evaluating precision, Roundness error, Straightness error

CLC Number:

TG156

HUANG Fugui;CUI Changcai. New Method for Evaluating Arbitrary Spatial Straightness Error[J]. , 2008, 44(7): 221-224.

[1]	YUE Longlong, HUANG Qiangxian, MEI Jian, CHENG Rongjun, ZHANG Liansheng, CHEN Lijuan. Method for Roundness Error Evaluation Based on Minimum Zone Method [J]. Journal of Mechanical Engineering, 2020, 56(4): 42-48.
[2]	YANG Zhenkun, JIN Tao, HAN Mengying, HOU Wenmei. A Research of Roll and Motion Straightness Synchronous Measurement Based on an Interferometer [J]. Journal of Mechanical Engineering, 2020, 56(20): 12-21.
[3]	LIANG Zhiqiang, MA Yue, NIE Qianqian, WANG Xibin, ZHOU Tianfeng, GUO Haixin, LI Yu, CHEN Jianjun. Experimental Study on Ultrasonic Cavitation Assisted Micro Drilling of Stainless Steel [J]. Journal of Mechanical Engineering, 2020, 56(1): 205-212.
[4]	LI Min, YUAN Julong, Lü Binghai, ZHAO Ping, ZHONG Meipeng. Shear-thickening Polishing of Si₃N₄ Ceramics [J]. Journal of Mechanical Engineering, 2017, 53(9): 193-200.
[5]	ZHANG Xuechang, LIANG Tao, ZHANG Xu, WANG Yingying, YANG Renmin. Research on Automobile Crankshaft Roundness and Cylindricity Errors Evaluation Mathematical Model Based on the Error Conversion [J]. Journal of Mechanical Engineering, 2016, 52(2): 91-98.
[6]	LUO Jun, LIN Yuqing, LIU Xueming, ZHANG Ping, ZHOU Dong, CHEN Jianduan. Research on Roundness Error Evaluation Based on the Improved Artificial Bee Colony Algorithm [J]. Journal of Mechanical Engineering, 2016, 52(16): 27-32.
[7]	YU Yongjian, LI Jishun, CHEN Guoding, XUE Yujun, LIU Yonggang, SHI Wenxiang. Numerical Calculation and Experimental Research of Rotational Accuracy on Cylindrical Roller Bearing [J]. Journal of Mechanical Engineering, 2016, 52(15): 65-72.
[8]	HU Penghao, ZHANG Jiankun, MA Xiaoqing, FEI Yetai. Analysis of Slider Motion Error on 3-PUU Parallel Coordinate Measuring Maching [J]. Journal of Mechanical Engineering, 2015, 51(18): 1-6.
[9]	ZHANG Xinbao;ZHANG Kun. Research on the Completeness of Minimum Zone Method of Straightness Error in Plane [J]. , 2012, 48(24): 14-18.
[10]	LIN Xiankun;LI Yanjun;YUAN Bo. Learning-based Accurate Compensation of 2x/y Tow-dimensional Circular Contour Error for Linear Feed Axes [J]. , 2011, 47(19): 168-173.
[11]	ZHANG Chunyang;LEI Xianqing;LI Jishun;DUAN Mingde. Method for Roundness Error Evaluation Based on Geometry Optimization [J]. , 2010, 46(12): 8-12.
[12]	JIA Lide;ZHENG Ziwen;LI Shengyi;DAI Yifan. Measurement Method of Straightness Error of a Long Ultra-precise Guideway with a Short Benchmark [J]. , 2008, 44(9): 141-147.
[13]	YUE Wuling;WU Yong. Fast and Accurate Evaluation of the Roundness Error Based on Quasi-incremental Algorithm [J]. , 2008, 44(1): 87-91.
[14]	Cao Xingjin;Wei Yunlong;Wang Jian;Yu Honghua. ANALYSIS AND TESTING OF THE PERFORMANCE OF LUBRICATING OIL FOR DOUBLE ENVELOPING WORM GEARING [J]. , 1993, 29(6): 42-47.

New Method for Evaluating Arbitrary Spatial Straightness Error

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 14

Recommended Articles

Metrics

Comments