[1] HOWELL L L. Compliant mechanisms[M]. New York:John Wiley&Sons, Inc, 2001. [2] 于靖军,裴旭,毕树生,等. 柔性铰链机构设计方法的研究进展[J]. 机械工程学报, 2010, 46(13):2-13. YU Jingjun, PEI Xu, BI Shusheng, et al. State-of-arts of design method for flexure mechanisms[J]. Journal of Mechanical Engineering, 2010, 46(13):2-13. [3] MORSCH F M, HERDER J L. Design of a generic zero stiffness compliant joint[C]//ASME International Design Engineering Conferences, 2010:427-435. [4] MERRIAM E G, HOWELL L L. Non-dimensional approach for static balancing of rotational flexures[J]. Mechanism & Machine Theory, 2015, 84(84):90-98. [5] HOETMER K, WOO G, KIM C, et al. Negative stiffness building blocks for statically balanced compliant mechanisms:Design and testing[J]. Journal of Mechanisms & Robotics, 2010, 2(4):041007. [6] JENSEN B D, HOWELL L L. The modeling of cross-axis flexural pivots[J]. Mechanism and machine theory, 2002, 37(5):461-476. [7] WITTRICK W H. The properties of crossed flexure pivots and the influence of the point at which the strips cross[J]. The Aeronautical Quarterly, 1951, Ⅱ:272-292. [8] LIU L, BI S, YANG Q, et al. Design and experiment of generalized triple-cross-spring flexure pivots applied to the ultra-precision instruments[J]. Review of Scientific Instruments, 2014, 85(10):105102. [9] 杨其资,刘浪,毕树生,等. 广义三交叉簧片柔性铰链的旋转刚度特性研究[J]. 机械工程学报, 2015, 51(13):189-195. YANG Qizi, LIU Lang, BI Shusheng, et al. Rotational stiffness characterization of generalized triple-cross-spring flexure pivots[J]. Journal of Mechanical Engineering, 2015, 51(13):189-195. [10] LIU L, ZHAO H, BI S, et al. Research of performance comparison of topology structure of cross-spring flexural pivots[C]//ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, August 17-20, 2014, Buffalo, New York, USA. ASME, 2014:V05AT08A025. [11] LIU L, BI S, YANG Q. Stiffness characteristics of inner-outer ring flexure pivots applied to the ultra-precision instruments[J]. ARCHIVE Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science 1989-1996(vols. 203-210), 2017:095440621772172. [12] SANCHEZ J A G. Criteria for the static balancing of compliant mechanisms[C]//ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, August 15-18, 2010, Montreal, Quebec, Canada. ASME, 2010:465-473. [13] AWTAR S, SEN S. A generalized constraint model for two-dimensional beam flexures:Nonlinear strain energy formulation[J]. Journal of Mechanical Design, 2010, 132:81009. |