Determination and Synthesis of Translational Parallel Mechanism with Constant Jacobian Matrix

doi:10.3901/JME.2017.05.101

Abstract

Abstract:

To obtain the translational parallel mechanism with constant Jacobian matrix, a method solving Jacobian matrix of mechanism using main movement screw and transmission wrench screw is proposed based on screw theory. Some determination conditions in a translational parallel mechanism requires to keep its Jacobian matrix constant in different poses are presented. On this basis, a class of 3-DOF translational parallel mechanisms each limb of which has three, four and five joints with the above characteristic is synthesized based on screw theory. Many different translational parallel mechanisms with constant Jacobian matrix are obtained. By taking the 3-PPRU and 3-CPU translational parallel mechanism as examples, the Jacobian matrices of the mechanisms are analyzed. According to the former analysis, graphs of time-rate change of the output speed and force for the mechanisms in different poses are presented. It can be seen from the graphs that the curves of the same output parameters for the mechanisms will mutual coincide in different poses with the certain input parameters. Thus, the conclusion that Jacobian matrix of the class of translational parallel mechanisms keeps constant is verified.

Key words: Jacobian matrix, translational parallel mechanism, type synthesis, screw theory

ZHAO Yanzhi, CAO Yachao, LIANG Bowen, ZHAO Tieshi. Determination and Synthesis of Translational Parallel Mechanism with Constant Jacobian Matrix[J]. Journal of Mechanical Engineering, 2017, 53(5): 101-107.

[1]	CHU Hongpeng, QI Bai, WANG Huiqi, QIU Xuesong, ZHOU Yulin. 6-DOF Wheeled Parallel Robot and Its Design Method [J]. Journal of Mechanical Engineering, 2023, 59(3): 46-53.
[2]	LI Haihong, DONG Jinan, GUO Shanguo, LIU Zhiqi. Analysis and Design Method for Non-uniform Parallel Mechanism Structure of Dynamic/Static Platform [J]. Journal of Mechanical Engineering, 2023, 59(17): 116-125.
[3]	WANG Chengzhi, WANG Yunchao. Influence of Clearances and Force State of Joints on Steering Error of Spatial Steering Mechanism [J]. Journal of Mechanical Engineering, 2022, 58(4): 240-249.
[4]	LI Yongquan, ZHENG Tianyu, JIANG Hongsheng, ZHANG Duo, ZHANG Lijie. Type Synthesis of New Kinematic Bifurcation Parallel Mechanism Based on Atlas Method [J]. Journal of Mechanical Engineering, 2022, 58(23): 1-17.
[5]	WEI Jun, JIA Weihan, LIU Chenglei, ZHANG Jianjun, HUANG Haijing, GUO Shijie. Type Synthesis of Reconfigurable Parallel Mechanisms for Ankle Rehabilitation with Completely Decoupled Actuated Limb [J]. Journal of Mechanical Engineering, 2022, 58(19): 45-56.
[6]	MENG Qizhi, XIE Fugui, ZHANG Sai, LIU Xinjun. Type Synthesis and Dimensional Optimization of a High-speed and High-acceleration Parallel Robot [J]. Journal of Mechanical Engineering, 2022, 58(13): 36-49.
[7]	LI Yongquan, JIANG Hongsheng, ZHENG Tianyu, JING Han, ZHANG Lijie. Type Synthesis of 3-translation Parallel Mechanism Based on Graphical Approach [J]. Journal of Mechanical Engineering, 2021, 57(23): 34-46.
[8]	WANG Sen, HAN Xueyan, LI Haotian, LI Haoran, LI Shihua. Research on Synthesis Method of a Loop Decoupling Two-rotation Parallel Mechanism with Large Load Bearing Capacity [J]. Journal of Mechanical Engineering, 2021, 57(21): 68-77.
[9]	SUN Jing, SHAN Yanxia, ZHANG Jianwei, SHAO Lei, LI Shihua. Research on Synthesis Method of Novel Parallel Mechanisms with Equivalent Motion to Serial-parallel Mechanism [J]. Journal of Mechanical Engineering, 2021, 57(1): 1-7.
[10]	CHEN Miao, ZHANG Qing, CHEN Wentao, QIN Xianrong, SUN Yuantao. Analysis and Type Synthesis of Parallel Mechanisms without Parasitic Motion based on Spatial Geometry [J]. Journal of Mechanical Engineering, 2021, 57(1): 77-85.
[11]	ZHU Jialong, HUANG Zhirong, ZHENG Shikun, XU Yundou, DUAN Yuzhu, MA Xiaofei. Configuration Synthesis and Networking Design of Triangular Pyramid Deployable/Foldable Mechanism [J]. Journal of Mechanical Engineering, 2020, 56(5): 29-38.
[12]	YANG Donghao, CAO Wenao, DING Huafeng. Type Synthesis of a Family of Umbrella-shaped Deployable Mechanisms Based on New Two-layer and Two-loop Linkages [J]. Journal of Mechanical Engineering, 2020, 56(5): 150-160.
[13]	YU Jingjun, LIU Kai, KONG Xianwen. State of the Art of Multi-mode Mechanisms [J]. Journal of Mechanical Engineering, 2020, 56(19): 14-27.
[14]	LIU Chenglei, ZHANG Jianjun, QI Kaicheng, NIU Jianye, LI Weimin, GUO Shijie. Synthesis of Generalized Spherical Parallel Manipulations for Ankle Rehabilitation [J]. Journal of Mechanical Engineering, 2020, 56(19): 79-91.
[15]	JIA Pu, LI Duanling, LI Haiyuan, YAN Xiaojie, GE Zhenghao. Structural Design and Configuration Analysis of Parallel Mechanism with Metamorphic Joint [J]. Journal of Mechanical Engineering, 2020, 56(19): 92-102.

Determination and Synthesis of Translational Parallel Mechanism with Constant Jacobian Matrix

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments