[1] |
LUO Zhong, SHI Baolong, WU Fayong, LI Yuqi, LIU Kaining, ZHANG Xiaoxia.
Study on the Vibration Characteristics of Bolted Joint Rotor System Considering Assembly Technology
[J]. Journal of Mechanical Engineering, 2024, 60(8): 396-406.
|
[2] |
ZHAO Sifang, SONG Qiang, WANG Mingsheng, LAI Wuxuan.
Study of Compound Fault Location for Vehicle Motors Based on the Deep Belief Network with Feature Reconstruction
[J]. Journal of Mechanical Engineering, 2024, 60(6): 91-103.
|
[3] |
PAN Xin, ZHANG Xin, LU Jiaqiao, WU Haiqi.
Design and Experimental Study of a Rotor Unbalanced Self-recovery Actuator Based on Accurate and Stable Regulation of Ultrasonic Motors
[J]. Journal of Mechanical Engineering, 2024, 60(4): 449-457.
|
[4] |
LI Honghao, LU Zhirong, WANG Xiaoming, TAN Shujun, ZHOU Wenya.
Optimal Dynamic Deformation Control of Active Reflector Based on Acceleration Representation of Objective Function
[J]. Journal of Mechanical Engineering, 2024, 60(19): 32-39.
|
[5] |
CHEN Gengbiao, LIU Zhiwen, YIN Lairong, YI Jijun, ZHANG Tuo.
Characteristic Analysis of Semi-active Triple-auxiliary-chambers Air Spring Vibration Absorber
[J]. Journal of Mechanical Engineering, 2024, 60(17): 194-207.
|
[6] |
JIN Xianjian, WANG Jiadong, XU Liwei, YAN Zeyuan, LU Yanbo, YIN Guodong, CHEN Nan.
μ-Synthesis Robust Control for Active Suspension of In-wheel-motor-driven Electric Vehicles
[J]. Journal of Mechanical Engineering, 2024, 60(16): 259-269.
|
[7] |
HU Junyu, HAN Xu, TAO Yourui, LI Shanhu, ZHANG Jianning.
Reliability Analysis of Residual Vibration Suppression in Flexible Servo Systems under S-curve Trajectory with Bounded Uncertainty
[J]. Journal of Mechanical Engineering, 2024, 60(16): 390-399.
|
[8] |
ZHANG Wei, LIU Hui, LIU Jingang, YAN Pengfei, FU Bing.
Adaptive Phase Compensation Method for Main Harmonic Disturbance in Electromechanical Transmission
[J]. Journal of Mechanical Engineering, 2024, 60(13): 354-365.
|
[9] |
LI Zhengqi, LIU Changzhao, SONG Jian, WANG Lei.
Electromechanical Cooperative Design of Permanent Magnet Synchronous Generator-gear Transmission System for Improving Annual Cycle Efficiency
[J]. Journal of Mechanical Engineering, 2024, 60(1): 296-308.
|
[10] |
ZHANG Xin-tong, ZHANG Cheng-ming, LI Li-yi, FU Peng-rui.
Design Method of High Efficiency Lightweight Permanent Magnet Synchronous Motor for Electric Propulsion
[J]. Journal of Mechanical Engineering, 2023, 59(8): 181-195.
|
[11] |
WANG Xinqing, WANG Xin, SHI Nianling, CHEN Zhaopeng.
Design of Flexible Joint Controller Based on Desired Dynamics
[J]. Journal of Mechanical Engineering, 2023, 59(3): 38-45.
|
[12] |
Yunpeng Xu, Jinghua Ji, Zhijian Ling, Chen Wang, Wenxiang Zhao.
Quantitative Comparison of Modular Linear Permanent Magnet Vernier Machines with and without Partitioned Primary*
[J]. Chinese Journal of Electrical Engineering, 2023, 9(3): 72-83.
|
[13] |
ZHANG Bingxin, LIU Kan, LI Yue, HU Wei, HUANG Qing, CHEN Yongdan.
Low Speed Interpolation Control Strategy of Permanent Magnet Synchronous Motor Based on Accumulative Error Compensation
[J]. Journal of Electrical Engineering, 2023, 18(3): 145-153.
|
[14] |
ZHANG Rongyun, WANG Zhen, SHI Peicheng, ZHAO Linfeng, LIU Yaming, ZHANG Bin.
Research on Torque Ripple Suppression of PMSM Based on Fractional Global Sliding Mode and Flux Observation
[J]. Journal of Electrical Engineering, 2023, 18(3): 154-163.
|
[15] |
XU Jiaqun, CHEN Tengyu.
Current Loop Parameters Design for PMSM with Filter Based on Multi-objective Optimization Method
[J]. Journal of Electrical Engineering, 2023, 18(3): 164-174.
|