| [1] |
WU Jie, DANG Jiaqiang, LI Yugang, CHEN Dong, AN Qinglong, WANG Haowei, CHEN Ming.
Study on Strengthening Mechanism and Anti-fatigue Performance of Stress Ultrasonic Rolling
[J]. Journal of Mechanical Engineering, 2024, 60(9): 127-136.
|
| [2] |
CHEN Zhaojie, XIE Jin, LIU Junhan, XIONG Changxin, LI Difan.
Study on Impulse-discharge Driven Abrasive Flow Assisted Grinding of Monocrystalline SiC
[J]. Journal of Mechanical Engineering, 2024, 60(9): 383-392.
|
| [3] |
ZHENG Jie, QUAN Wei, LIU Yang, LU Xuemin, LIU Xiaohong, YUE Yanan, ZHOU Teng, CAI Zhenbing.
Research on Surface Cracks Identification of Cr/Zr Coating in Circumferential Compression
[J]. Journal of Mechanical Engineering, 2024, 60(8): 1-10.
|
| [4] |
LIANG Peng, ZHAO Wenzhuo, WU Tonghai, RAN Yi.
Ultrasonic Echo Characteristics and On-machine Detection Method of Small Tooth Cracks in Generator Rotors
[J]. Journal of Mechanical Engineering, 2024, 60(8): 11-21.
|
| [5] |
ZOU Xiaolong, YANG Guangxue, ZHANG Bo, LI Guoshun, ZHANG Yichao, CHEN Can, ZHANG Shujun.
Study on Dynamic Stress Characteristics of Bogie Frame of High-speed EMU
[J]. Journal of Mechanical Engineering, 2024, 60(8): 212-223.
|
| [6] |
ZHAO Erhui, SHAO Bo, QIAO Miaojie, QUAN Long, WANG Chengwen.
Study on the Elastohydrodynamic Lubrication Characteristics of the Vane-stator Pair in High Pressure Vane Pump
[J]. Journal of Mechanical Engineering, 2024, 60(8): 308-319.
|
| [7] |
ZHU Shaoyu, ZHANG Xiangjun, SUN Jun, WANG Dagang.
Average Flow Model for Micropolar Fluid Lubrication of Rough Surface Bearings
[J]. Journal of Mechanical Engineering, 2024, 60(7): 203-211.
|
| [8] |
WANG Boshi, CHEN Nannan, CAI Yan, WANG Min.
Low-temperature Fatigue Ductile-to-brittle Transition Behavior and Mechanism for Simulated Coarse-grained Heat-affected Zone of a High-strength Low-alloy Bainite Steel
[J]. Journal of Mechanical Engineering, 2024, 60(6): 271-278.
|
| [9] |
ZHOU Zuyi, YANG Yuwei, QI Wenyao, GONG Jianchao, LI Zhaotong.
Method of Equivalent Inverse Solution of Multi-rigid-flexible Body Dynamics and Performance Optimization Synthesis of Waist Exoskeleton Robot
[J]. Journal of Mechanical Engineering, 2024, 60(5): 107-118.
|
| [10] |
HUA Dongpeng, ZHOU Qing, WANG Wan, LI Shuo, WANG Zhijun, WANG Haifeng.
A Molecular Dynamics Simulation on the Subsurface Damage Mechanism in the Nano-polishing Process of Silicon Carbide
[J]. Journal of Mechanical Engineering, 2024, 60(5): 231-240.
|
| [11] |
ZHOU Tian, CAI Lixun, HAN Guangzhao.
Novel Flat-SPT Method for Obtaining Mechanical Properties of Ductile Materials and Its Application
[J]. Journal of Mechanical Engineering, 2024, 60(4): 316-325.
|
| [12] |
HU Long, LIU Hongyan, CHENG Huimei, CHEN Weiqi, FENG Guangjie, YE Yanhong, DENG Dean.
Study on Residual Stress of Multi-layer and Multi-pass Butt-welded Joint for Ultra-high Strength Wear-resistant Steel NM500
[J]. Journal of Mechanical Engineering, 2024, 60(4): 335-344.
|
| [13] |
LI Ying, ZHANG Jiafang, ZHANG Zhaoyong, WANG Xincheng, ZHANG Jin, KONG Xiangdong.
Design of Minimum Diameter of Piston Neck in Swashplate Axial Piston Pump
[J]. Journal of Mechanical Engineering, 2024, 60(4): 430-437.
|
| [14] |
GUO Jindao, ZHAO Huan, WANG Ping, SUN Dan, WANG Shuang.
Numerical and Experimental Study on Oil-air Two-phase, Eakage Flow Characteristics Based on Air-bleeding Oil-sealing Mode in Seal Clearance of Bearing Cavity
[J]. Journal of Mechanical Engineering, 2024, 60(3): 214-225.
|
| [15] |
MA Yongtao, SUN Ning, WANG Junlong, LI Chunfan, LU Chunsheng, ZHANG Bin, LIU Lanrong.
Calculation of Shot Peening Coverage of Pre-mixed Jet and its Influence on the Surface Integrity of Carburized Steel
[J]. Journal of Mechanical Engineering, 2024, 60(3): 393-404.
|
