STUDY ON SYNTHETICAL EVALUATION MODEL FOR TRIBOLOGY DESIGN

Abstract

Abstract: In tribology design system, a new neural network-based synthetical evaluation model is proposed, which takes system engineering thought of tribology system as guide and considers comprehensively requisition of tribology design. It is applied to tribology design of bearing-rotor system. Practice have proved that evaluating results of this model are accuracy and reasonable.

Key words: Design, Neural network, Synthetical evaluation, Tribology, mixing, numerical simulation, sectional profiles, twin rotors in differential screw coupling, united geometrical design

CLC Number:

TH117

Zhan Renjun;Zhang Youyun;Xie Youbai. STUDY ON SYNTHETICAL EVALUATION MODEL FOR TRIBOLOGY DESIGN[J]. , 1997, 33(3): 14-20.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y1997/V33/I3/14

[1]	LI Haoran, ZHOU Haichao, WANG Guolin, ZHANG Rongyun, ZHAO Chunlai. Road Friction Coefficient and Tire Cornering Characteristics Parameters Estimation Based on PMSM Sensorless Control [J]. Journal of Mechanical Engineering, 2026, 62(8): 196-209.
[2]	LI Bo, GUO Jinfei, BEI Shaoyi, XU Nan. Research on Lane Water Accumulation Using Intelligent Tire with Embedded Accelerometer [J]. Journal of Mechanical Engineering, 2026, 62(8): 210-220.
[3]	ZHANG Xinjie, WANG Luhang, GUO Konghui, LIU Yang, JIN Gengrui, YAO Quan. System-level Co-design Optimization for Active Camber and Toe Suspension Systems [J]. Journal of Mechanical Engineering, 2026, 62(8): 21-32.
[4]	HE Zhicheng, HE Jinglin, JIANG Chao, GAO Hui, XU Wenlin, LIU Yue. Optimal Design Methodology of Automobiles Suspension Topological Configuration with Multi-joints Parsing [J]. Journal of Mechanical Engineering, 2026, 62(8): 33-48.
[5]	WANG Yuxiang, GAO Yang, JIANG Enchao, DONG Na, CHEN Xudong, PENG Fan, WANG Liwen. Wind Turbine Blade Health Monitoring Method Based on GAF-MACNN [J]. Journal of Mechanical Engineering, 2026, 62(7): 139-149.
[6]	LUO Zhong, LI Hongyu, LI Lei, DONG Yinzhe. Real-time Prediction Method for Response of Difficult-to-measure Points of Rotor System Under Variable Working Conditions Driven by Digital Twin [J]. Journal of Mechanical Engineering, 2026, 62(7): 221-233.
[7]	LUO Shijian, GUO Herui, LI Qingling, YI Peiqi. Trust Issues in Design for Human-AI Collaboration: Challenges, Progress and Prospects [J]. Journal of Mechanical Engineering, 2026, 62(7): 324-342.
[8]	KE Qingdi, ZHANG Zhen, XUE Bing, LI Zisheng. Dynamic Knowledge Push Method of Green Design Based on Personnel Characteristics [J]. Journal of Mechanical Engineering, 2026, 62(7): 343-362.
[9]	ZHANG Heng, HU Tiannan, DING Xiaohong, LUO Yunfeng, LI Haidong, NI Weiyu. Topology Optimization for Designing Shell-multi-material Infill Structures [J]. Journal of Mechanical Engineering, 2026, 62(7): 375-384.
[10]	LI Dongjie, LIANG Yu, YAO Gang, GAO Weida, RONG Weibin, YANG Liu, ZHANG Yu. Design of Microcavity Capsule Structures for Glioma Radiochemotherapy and Study on Dose Distribution and Dynamic Response [J]. Journal of Mechanical Engineering, 2026, 62(7): 405-417.
[11]	QIN Tong, MENG Qingyao, WEI Wei, CHEN Liwei, WANG Ziyang, LI Li. Research on Data-driven General Loop Design of Launch Vehicles [J]. Journal of Mechanical Engineering, 2026, 62(7): 15-24.
[12]	HUANG Yu, WANG Ru, WANG Guoxin, LI Yingjie, LI Haokun, WANG Lanbing, ZHANG Wenfeng, YAN Yan. Research on an Intelligent Decision Support Methodology for Complex Equipment System Architecture Design [J]. Journal of Mechanical Engineering, 2026, 62(7): 67-96.
[13]	LI Zixuan, LI Hongji, XU Zhixiang, NIU Hui, JI Ce, WANG Tao. Research on the Bonding Forming Mechanism of Carbon Steel/Stainless Steel Bimetallic Tubes with Three-roll Corrugated Skew Rolling [J]. Journal of Mechanical Engineering, 2026, 62(6): 174-184.
[14]	JIA Kangkang, DU Junmin, CHEN Feiyu, SHI Jianwei, HOU Guoyi, LI Cheng. AM-1DCNN Based Automatic Recognition of Mechanical Damage in Composite Material [J]. Journal of Mechanical Engineering, 2026, 62(6): 247-256.
[15]	DENG Jiadong, GUAN Shanyue, WANG Xiaokai, QIAN Dongsheng, LIU Chao, LIU Wei, HUA Lin. Development and Application of Network Collaborative and Intelligent Ring Rolling Technology for High-end Equipment Large Rings [J]. Journal of Mechanical Engineering, 2026, 62(6): 65-86.

STUDY ON SYNTHETICAL EVALUATION MODEL FOR TRIBOLOGY DESIGN

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments