Hybrid Preheating Method for Lithium-ion Battery Used in Cold Environment

doi:10.3901/JME.2019.14.053

Abstract

Abstract: Due to the poor charge-discharge performance of lithium-ion batteries and the lithium precipitation during the charging process in cold environment, which may even result in safety accidents, it is necessary and urgent to preheat lithium-ion batteries in subzero temperature. In order to realize the low-temperature rapid heating of lithium-ion battery, a hybrid heating method combining internal heating of AC and external heating of wide-wire metal film is proposed. The temperature rise model of the battery is established to simulate the temperature rise characteristics. Therefore, the verification test of the hybrid heating strategy is carried out. The results show that the hybrid heating method can heat the battery from -20℃ to 5℃ in 471 s. Compared with the AC heating method, the heating rate is increased by 22%, and the heating power consumption is reduced by 23%. Especially for battery pack with large difference in its cell's internal resistance, the method can also improve the consistency of the heating effect, and thus is a feasible low-temperature heating method for the battery system.

Key words: AC heating, hybrid heating method, lithium-ion battery, wide-wire metal film heating

CLC Number:

TM912

XIONG Rui, WANG Kan, GUO Shanshan. Hybrid Preheating Method for Lithium-ion Battery Used in Cold Environment[J]. Journal of Mechanical Engineering, 2019, 55(14): 53-59.

References

[1] LEI Zhiguo, ZHANG Yuwen, LEI Xueguo. Temperature uniformity of a heated lithium-ion battery cell in cold climate[J]. Applied Thermal Engineering, 2018, 129:148-154.
[2] TSAI W C, RIZVI S S H. Liposomal microencapsulation using the conventional methods and novel supercritical fluid processes[J]. Trends in Food Science & Technology, 2016, 55:61-71.
[3] PARK G, GUNAWARDHANA N, NAKAMURA H, et al. The study of electrochemical properties and lithium deposition of graphite at low temperature[J]. Journal of Power Sources, 2012, 199:293-299.
[4] AHMAD A P, ANDREAS V, THOMAS S. Cooling and preheating of batteries in hybrid electric vehicles[C]//The 6th ASME-JSME Thermal Engineering Joint Conference, 2003:1-7.
[5] ZHANG Jianbo, GE Hao, LI Zhe, et al. Internal heating of lithium-ion batteries using alternating current based on the heat generation model in frequency domain[J]. Journal of Power Sources, 2015, 273:1030-1037.
[6] WANG Chaoyang, LIU Ming, LI Bingxin, et al. Thermodynamic analysis on the transient cycling of coal-fired power plants:Simulation study of a 660 MW supercritical unit[J]. Energy, 2017, 122:505-527.
[7] JI Yan, WANG Chaoyang. Heating strategies for Li-ion batteries operated from subzero temperatures[J]. Electrochimica Acta, 2013, 107:664-674.
[8] LI Junqiu, SUN Danni. Lithium-ion batteries modeling and optimization strategies for sinusoidal alternating current heating at low temperature[J]. Energy Procedia, 2018, 152:562-567.
[9] LI Zhe, ZHANG Jianbo, WU Bin, et al. Examining temporal and spatial variations of internal temperature in large-format laminated battery with embedded thermocouples[J]. Journal of Power Sources, 2013, 241:536-553.
[10] JIANG Jiuchun, RUAN Haijun, SUN Bingxiang, et al. A low-temperature internal heating strategy without lifetime reduction for large-size automotive lithium-ion battery pack[J]. Applied Energy, 2018, 230:257-266.
[11] DEES D W, VINCENT S B. Electrochemical modeling of lithium polymer batteries[J]. Journal of Power Sources, 2002(110):310-320.
[12] LI Xinggang, XIONG Rui. Modeling and optimization of heat dissipation structure of EV battery pack[J]. Journal of Beijing Institute of Technology, 2018, 27(1):29-35.
[13] GUO Shanshan, XIONG Rui, WANG Kan, et al. A novel echelon internal heating strategy of cold batteries for all-climate electric vehicles application[J]. Applied Energy, 2018, 219:256-263.

[1]	XIONG Rui, LI Zhengyang, YAN Runbo, YANG Ruixin. Research on All-climate Self-heating Lithium-ion Battery and Low Temperature Extreme Heating Strategy [J]. Journal of Mechanical Engineering, 2024, 60(18): 247-257.
[2]	LIU Zhengyu, ZHANG Zheng, GUO Lekai, MENG Hui, LIU Xiang. State of Health Prediction for Lithium-ion Batteries Based on Empirical Mode Decomposition [J]. Journal of Mechanical Engineering, 2024, 60(14): 272-281.
[3]	PENG Jichang, LIU Kailong, MENG Jinhao, LIU Haitao. Dynamically Parameterized Structure for Lithium-ion Battery Method [J]. Journal of Mechanical Engineering, 2024, 60(14): 298-305.
[4]	WU Ji, FANG Leichao, LIU Xingtao, CHEN Jiajia, LIU Xiaojian, Lü Bang. State of Health Estimation of Lithium-ion Battery Based on Feature Optimization and Random Forest Algorithm [J]. Journal of Mechanical Engineering, 2024, 60(12): 335-343.
[5]	YU Quanqing, WANG Can, LI Jianming, TANG Aihua, ZHAO Lijun. Model Evaluation and Analysis for Multi-topology Lithium Battery Pack External Short Circuit Characteristics [J]. Journal of Mechanical Engineering, 2023, 59(6): 159-172.
[6]	YANG Xulai, YUAN Shuaishuai, YANG Wenjing, LIU Chuang, YANG Shichun. Research Progress on Energy Density of Li-ion Batteries for Evs [J]. Journal of Mechanical Engineering, 2023, 59(6): 239-254.
[7]	YANG Shichun, LU Yu, ZHOU Sida, LIU Shiqiang, WANG Fang, CHEN Fei. Research Progress of Standards for Lithium-ion Batteries on Electric Vehicle [J]. Journal of Mechanical Engineering, 2023, 59(22): 3-19.
[8]	PANG Xiaoqing, LI Jiacheng, LIU Wenxue, DENG Zhongwei, HU Xiaosong. Estimation of Distributed Temperature of Large-format Fast-charging Lithium-ion Batteries Based on a Model-data Fusion Method [J]. Journal of Mechanical Engineering, 2023, 59(22): 20-32.
[9]	HE Hongwen, WANG Haoyu, WANG Yong, LI Shuangqi. Lithium-ion Battery State of Health Estimation Based on Real-world Driving Data [J]. Journal of Mechanical Engineering, 2023, 59(22): 46-58.
[10]	LI Yichao, WANG Nan, DUAN Bin, KANG Yongzhe, ZHANG Chenghui. Core Temperature Estimation Method for Lithium-ion Battery Based on Deep Learning Method with Particle Swarm Optimization [J]. Journal of Mechanical Engineering, 2023, 59(22): 69-78.
[11]	GUO Zhechen, XU Jun, WANG Xingzao, XU Ziming, MEI Xuesong. Optimal Design of Flat Heat Pipe-liquid Cooling Battery Thermal Management System Based on 1D/3D Thermal Model [J]. Journal of Mechanical Engineering, 2023, 59(22): 79-88.
[12]	ZHANG Yanru, ZHANG Junwei, WANG Zhanguo, LI Jiefeng, ZHANG Weige. Abnormal Diagnosis of Vehicle Lithium Ion Battery Based on Historical Data [J]. Journal of Mechanical Engineering, 2023, 59(22): 89-99.
[13]	GU Pingwei, DUAN Bin, KANG Yongzhe, ZHANG Chenghui, DU Chunshui. Online Lithium-ion Battery Capacity Estimation Based on Random Charging Data [J]. Journal of Mechanical Engineering, 2023, 59(22): 100-110.
[14]	LAI Xin, MA Yunjie, ZHENG Yuejiu, HAN Xuebing. Reconstruction Method of Electrochemical Impedance Spectrum Curve of Lithium-ion Batteries Based on Geometric Feature Transformation and Migration [J]. Journal of Mechanical Engineering, 2023, 59(22): 140-149.
[15]	WANG Zhaohui, XIONG Xiao, GAO Quanjie, FAN Yiwei. Performance Study of Cylindrical Lithium Battery Thermal Management System Based on the Design of Spider Web-like Flow Channel Structure [J]. Journal of Mechanical Engineering, 2023, 59(22): 150-162.