INSTABILITY PROBLEM OF SHEET METAL DIELESS INCREMENTAL FORMING BASED ON POINT BOLSTER

Abstract

Abstract: One new method of the sheet metal dieless forming is creatively proposes —— the point bolster dieless forming, which adopts point rod as bolster instead of the conventional model bolster. This method gets rid of the constraint of the mould and realizes the real dieless forming. In this new forming method, cone is the critical shape. Such protuberant shape as parabolic shell tends to instability, as well cone and hyperboloid is stable. However, the instability can be effectively overcome if technologic projects are implemented according to the influence factors.

Key words: Incremental forming, Instability, Point bolster forming, Rapid prototyping, Sheet metal dieless forming, Sheet metal plastic forming

CLC Number:

TG381

Mao Feng;Mo Jianhua;Huang Shuhuai. INSTABILITY PROBLEM OF SHEET METAL DIELESS INCREMENTAL FORMING BASED ON POINT BOLSTER[J]. , 2005, 41(11): 140-143.

[1]	GAO Sheng, WU Jianjun, YAN Jing, ZHANG Rongxia, YU Zhongping, LIU Long. Prediction of Buckling and Deformation Law of Pipe Fittings under Free Bending Based on Energy Method [J]. Journal of Mechanical Engineering, 2024, 60(20): 162-172.
[2]	CUI Xuexi, WAN Min, WU Xiangdong, GUAN Bobin, ZHOU Bingying. Method for Determining Localized Instability Based on Strain Evolution [J]. Journal of Mechanical Engineering, 2023, 59(22): 234-244.
[3]	ZHOU Zihong, YOU Weitao, LU Yinyu, XI Yufan, WANG Kexing, WANG Guanyun, SUN Lingyun. Shape-changing Interface Design with the User-defined Form and Self-sensing Capability [J]. Journal of Mechanical Engineering, 2023, 59(11): 84-93.
[4]	MENG Zhiyuan, XU Hailiang, LIU Chunzhen. Research Status and Prospect of Microgrid Stability under Pulsed Power Loads [J]. Journal of Electrical Engineering, 2022, 17(1): 2-14.
[5]	DU Bing, ZHAO Chonghao, XIE Jun, LI Han, ZHAO Changcai, DU Zhiming. Influence of Stress Loading Path on the Limit of Plastic Wrinkling and Instability of Plates and Shells [J]. Journal of Mechanical Engineering, 2021, 57(4): 83-91.
[6]	YOU Bo, LI Kunpeng, LI Jiayu, LIU Daquan. Instability Adjustment and Fault-tolerant Gait Design for Hexapod Robot Single Leg Failure [J]. Journal of Mechanical Engineering, 2021, 57(1): 100-109.
[7]	LAI Yongneng, LI Qingfeng, QIU Jianhai, YANG Jiangang. Research on the Flutter Instability Vibration of Tilting Pad Journal Bearing Considering Fluid-structure Interaction [J]. Journal of Mechanical Engineering, 2020, 56(9): 118-124.
[8]	DU Bing, SONG Pengfei, XIE Jun, ZHAO Changcai, GUAN Fenglong. Prediction of Critical Wrinkle Instability of Thin Plates by Combining Energy Method Theory with Numerical Simulation [J]. Journal of Mechanical Engineering, 2020, 56(4): 57-64.
[9]	JIANG Zhinong, ZHOU Chao, ZHANG Jinjie, LIU Wenhua, WANG Yao, SUN Xu. Research on Self-healing Control Method of Reciprocating Compressor Capacity Control Instability [J]. Journal of Mechanical Engineering, 2020, 56(22): 131-141.
[10]	YANG Zhiyun, CHEN Fei. Study on the Heating-assisted Single Point Incremental Forming of Polymers [J]. Journal of Mechanical Engineering, 2020, 56(16): 71-77.
[11]	GONG Ran, CHENG Zhigao, XU Yi, ZHANG Yudong, ZHANG He. Modeling Research on Characteristics of Two Types of Thermal Instability for Rotary Seal [J]. Journal of Mechanical Engineering, 2019, 55(9): 55-62.
[12]	LIU Wei, XU Yongchao, CHEN Yizhe, YUAN Shijian, HU Lan, ZHANG Zhichao, GUO Lijie. Mechanism and Controlling of Wrinkles during Hydroforming of Integral Thin-walled Curved Shell [J]. Journal of Mechanical Engineering, 2018, 54(9): 37-44.
[13]	DU Bing, GUAN Fenglong, SONG Pengfei, HAN Zhaojian, ZHANG Xin, ZHAO Changcai. Numerical Simulation Methods of Sheet Metal Wrinkling Instability Problem [J]. Journal of Mechanical Engineering, 2018, 54(24): 42-50.
[14]	ZHENG Wenjian, HE Yanming, YANG Jianguo, DONG Zhibo. Influence of the Crystal Orientation of Epitaxial Solidification on the Linear Instability Dynamic during the Solidification of Welding Pool [J]. Journal of Mechanical Engineering, 2018, 54(2): 62-69.
[15]	LI Xiaopeng, PAN Wujiu, GAO Jianzhuo, LI Shujun, WEN Bangchun. Influence of Surface Topography Characteristics on Mode Coupling Instability System [J]. Journal of Mechanical Engineering, 2017, 53(5): 116-127.

INSTABILITY PROBLEM OF SHEET METAL DIELESS INCREMENTAL FORMING BASED ON POINT BOLSTER

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments