Rapid Modeling of Free Form Reflector Surface Based on Iterative Minor Adjustment

Abstract

Abstract: Free form reflector reverse modeling has rigid precision and efficiency requirements, which are related of optical characteristics. A rapid modeling method of surface minor adjustment is presented, which is based on iterative fitting. The reflector surfaces can be created rapidly by minor adjusting the section curves iteratively, and the whole process is under error control. Design applications show that developed techniques can deal with the reflector modeling stably and rapidly, and improve enterprise productivity obviously.

Key words: Iterative minor adjustment, Photometric characteristics, Reflector, Reverse modeling, capillary wick, conical, flat heat pipe, heat transfer, oxidation, thermal resistance

CLC Number:

TP391

WANG Gang;SHAN Yan;WU Weiwei. Rapid Modeling of Free Form Reflector Surface Based on Iterative Minor Adjustment[J]. , 2008, 44(3): 117-122.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2008/V44/I3/117

[1]	LI Qingming, HU Guanyang, XU Zhengzheng, ZHOU Haonan, MEI Deqing, WANG Yancheng. Design and Performance Testing of Integrated Modular Thermal Management System for Electric Vehicles [J]. Journal of Mechanical Engineering, 2026, 62(6): 292-301.
[2]	WU Jinhui, CHEN Yongchang, WU Yanan, HAO Huiqian, YUAN Xiang, TAO Yourui. A Digital Twin-driven Approach for Operational Status Monitoring and Virtual Debugging of Reflector Antennas [J]. Journal of Mechanical Engineering, 2026, 62(5): 263-273.
[3]	ZHU Ruikang, JIA Qiang, WANG Yishu, ZHANG Hongqiang, MA Limin, ZOU Guisheng, GUO Fu. Application Challenges and Research Progress of Copper Sintering for Power Module Packaging [J]. Journal of Mechanical Engineering, 2026, 62(2): 115-130.
[4]	YANG Xiao, DU Yanbin, YANG Zhen, LINGHU Langlang, LI Benjie. Transient Temperature Field Study of Dry Hob Spindle System Based on Thermal Network under Time-Varying Tool Shifting [J]. Journal of Mechanical Engineering, 2026, 62(1): 408-420.
[5]	LI Chenxi, GUO Pengcheng. Influence of Tip Design and Structural Parameters on Aerothermal Performance in High-load Turbine [J]. Journal of Mechanical Engineering, 2025, 61(8): 283-296.
[6]	LI Yongquan, HAO Qingrui, LIANG Guodong, WANG Cunxi, GAO Yang. Microstructure and High Temperature Oxidation Properties of Al-Y Co-deposition Coating on TiAl Alloy [J]. Journal of Mechanical Engineering, 2025, 61(4): 137-146.
[7]	GAO Binhua, JIN Tan, XIE Guizhi, QU Meina. Study on Heat Flux Distribution and Heat Transfer Mechanism Considering Wheel-workpiece Contact Geometry in Vertical-spindle Surface Grinding [J]. Journal of Mechanical Engineering, 2025, 61(23): 381-394.
[8]	ZHAO Wenyong, WEI Yanhong, XU Guoxiang, HU Qingxian, WANG Yaowei. Research on the Morphology, Heat Transfer, and Metal Flow Behavior of MIG-based Wire Arc Additively Manufactured Single-pass Aluminum Alloy via Integrated Model [J]. Journal of Mechanical Engineering, 2025, 61(22): 97-108.
[9]	MA Jiale, LIU Gaowen, WU Shuai, KONG Xiaozhi, LIN Aqiang. Study on Heat Transfer Characteristics of Cover-plate Cavity in Pre-swirl System of Aircraft Engine [J]. Journal of Mechanical Engineering, 2025, 61(22): 282-293.
[10]	LI Guang, FU Yichuan, LA Peiqing, SHI Yu. Research Progress on Corrosion Mitigation Strategies of Stainless Steel in Concentrated Solar Power Generation [J]. Journal of Mechanical Engineering, 2025, 61(20): 49-61.
[11]	ZHOU Di, DAI Liangcheng, CHI Maoru, ZENG Pengcheng, LI Xuyang, ZHENG Yang. Research on the Vertical Amplitude-dependent and Frequency-dependent Mechanical Model of the Primary Conical Rubber Springs for Railway Vehicles [J]. Journal of Mechanical Engineering, 2025, 61(20): 293-300.
[12]	SHEN Liangliang, XIAO Juan, XU Jian, JIAN Xigao, LIN Jianfeng, REN Zhiying. Impact of Thermal Input on Induction Welding of CF/PPS Composites: Design of a Welding Process Window with Multiphysical Coupling [J]. Journal of Mechanical Engineering, 2025, 61(18): 76-85.
[13]	DENG Daxiang, ZHANG Quanfu, ZENG Long. Study on Heat Transfer and Fluid Flow of Reentrant Microchannels and Effects of Geometry Parameters on Its Performance [J]. Journal of Mechanical Engineering, 2025, 61(16): 92-101.
[14]	ZHOU Jiechen, LIU Jianhua, XIA Huanxiong, ZHANG Xiumin, ZHAO Yuxi, MENG Junfeng. Modeling and Surface-figure Analysis of Bonding Assembly of a Spatial Reflector [J]. Journal of Mechanical Engineering, 2025, 61(13): 255-264.
[15]	GAO Fan, HE Xin, LIU Yanbo, MOU Guangyi, LIU Shaopu, LIU Ling, MA Zhuang. Research on Plasma Spraying Resin Matrix Antioxidant Materials and Coatings [J]. Journal of Mechanical Engineering, 2025, 61(10): 100-116.

Rapid Modeling of Free Form Reflector Surface Based on Iterative Minor Adjustment

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments