| [1] |
DONG Zhigang, WANG Zhongwang, RAN Yichuan, BAO Yan, KANG Renke.
Advances in Ultrasonic Vibration-assisted Milling of Carbon Fiber Reinforced Ceramic Matrix Composites
[J]. Journal of Mechanical Engineering, 2024, 60(9): 26-56.
|
| [2] |
WU Jie, DANG Jiaqiang, LI Yugang, CHEN Dong, AN Qinglong, WANG Haowei, CHEN Ming.
Study on Strengthening Mechanism and Anti-fatigue Performance of Stress Ultrasonic Rolling
[J]. Journal of Mechanical Engineering, 2024, 60(9): 127-136.
|
| [3] |
WANG Pai, BAI Yifan, ZHAO Wenxiang, ZHANG Yibo, LIU Zhibing.
Research on Surface Integrity Evolution of Short Arc Assisted Milling of Superalloy
[J]. Journal of Mechanical Engineering, 2024, 60(9): 434-444.
|
| [4] |
LIANG Peng, ZHAO Wenzhuo, WU Tonghai, RAN Yi.
Ultrasonic Echo Characteristics and On-machine Detection Method of Small Tooth Cracks in Generator Rotors
[J]. Journal of Mechanical Engineering, 2024, 60(8): 11-21.
|
| [5] |
WU Jizhan, WEI Peitang, WU Shaojie, LIU Huaiju, ZHU Caichao.
Rolling Contact Fatigue Performance Prediction and Surface Integrity Optimization of Aviation Gear Steel
[J]. Journal of Mechanical Engineering, 2024, 60(8): 81-93.
|
| [6] |
DONG Qingbing, CHEN Zhuang, LUO Zhentao, ZHANG Jie, WEI Jing.
Fatigue Life Prediction and Fracture Behavior Study of Fretting Interface at Three-dimensional Line Contact
[J]. Journal of Mechanical Engineering, 2024, 60(8): 107-120.
|
| [7] |
YANG Yang, WANG Zekui, CHEN Chen, MA Hua, YANG Zhinan, ZHANG Fucheng.
Effect of Ni and Cu Alloying on Microstructure and Mechanical Properties of Fe-Mn-Al-C Austenitic Lightweight Steel
[J]. Journal of Mechanical Engineering, 2024, 60(8): 154-164.
|
| [8] |
LI Li, WANG Yixuan, LUO Fen, ZHANG Wentao, ZHAO Wei, LI Xiaoqiang.
Effect of Brazing Time on TiAl Joint Brazed with TiH2-65Ni+TiB2 Filler
[J]. Journal of Mechanical Engineering, 2024, 60(8): 176-185.
|
| [9] |
YANG Siyu, XU Lianyong, ZHAO Lei, HAN Yongdian.
Research on Corrosion Fatigue Performance and Fatigue Fracture Mechanism of Pre-corrosion EH36 Steel Welded Joints
[J]. Journal of Mechanical Engineering, 2024, 60(8): 204-211.
|
| [10] |
ZOU Xiaolong, YANG Guangxue, ZHANG Bo, LI Guoshun, ZHANG Yichao, CHEN Can, ZHANG Shujun.
Study on Dynamic Stress Characteristics of Bogie Frame of High-speed EMU
[J]. Journal of Mechanical Engineering, 2024, 60(8): 212-223.
|
| [11] |
HOU Xuzhao, MA Yue, XIANG Changle.
Research on Steering Stability Control of Electric Drive Tracked Vehicle
[J]. Journal of Mechanical Engineering, 2024, 60(8): 233-244.
|
| [12] |
HAN Jing, ZHANG Zheng, SONG Yuanming, SUN Qisheng, LIU Zhiyuan, SUN Jiapeng, CAO Chao, ZHAO Jiyun.
Preparation, Microstructure and Properties of High-performance Gradient Nanostructured Pure Ti Plate by USSR
[J]. Journal of Mechanical Engineering, 2024, 60(6): 227-235.
|
| [13] |
REN Zhongkai, LI He, XU Yanan, CHENG Qian, FENG Hao, WANG Tao.
Constitutive Model and Microstructural Evolution for Tensile Behavior of Carbon Steel Ultrathin Strip under Pulsed Electric Field
[J]. Journal of Mechanical Engineering, 2024, 60(6): 245-260.
|
| [14] |
WANG Boshi, CHEN Nannan, CAI Yan, WANG Min.
Low-temperature Fatigue Ductile-to-brittle Transition Behavior and Mechanism for Simulated Coarse-grained Heat-affected Zone of a High-strength Low-alloy Bainite Steel
[J]. Journal of Mechanical Engineering, 2024, 60(6): 271-278.
|
| [15] |
WANG Tengfei, SUN Wenjing, ZHOU Jinsong, GONG Dao, WANG Qiushi, ZHANG Zhanfei.
Research on Compiling Vibration Load Spectrum of Equipment mounted on Bogie Frame Based on Fatigue Damage Spectrum
[J]. Journal of Mechanical Engineering, 2024, 60(6): 287-295.
|
