Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (18): 465-490.doi: 10.3901/JME.260624
SONG Xueguan1,2, HE Xiwang3, YANG Liangliang4, PANG Yong1,2, KAN Ziyun1,2
Received:2025-10-30
Revised:2026-06-11
Published:2026-11-20
CLC Number:
SONG Xueguan, HE Xiwang, YANG Liangliang, PANG Yong, KAN Ziyun. Model Reduction: A Key Technology for Performance Modeling of Equipment in the Context of Digital Twins/Metaverse[J]. Journal of Mechanical Engineering, 2026, 62(18): 465-490.
Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks
| [1] ZHOU Ji,LI Peigen,ZHOU Yanhong,et al. Toward new-generation intelligent manufacturing[J]. Engin- eering,2018,4(1):11-20. [2] WANG Baicun,TAO Fei,FANG Xudong,et al. Smart manufacturing and intelligent manufacturing:A comparative review[J]. Engineering,2021,7(6):738-757. [3] 钟群鹏,傅国如,张峥,等. 机电装备失效研究的内涵及其科学问题探讨[J]. 机械工程学报,2003,39(10):13-20. ZHONG Qunpeng,FU Guoru,ZHANG Zheng,et al. Contents and scientific problems discussing of failure research of the electromechanical equipment[J]. Journal of Mechanical Engineering,2003,39(10):13-20. [4] RAVIV G,FISHBAIN B,SHAPIRA A. Analyzing risk factors in crane-related near-miss and accident reports[J]. Safety Science,2017,91:192-205. [5] BOURASSA D,GAUTHIER F,ABDUL-NOUR G. Equipment failures and their contribution to industrial incidents and accidents in the manufacturing industry[J]. International Journal of Occupational Safety and Ergonomics,2016,22(1):131-141. [6] REN Lei,DONG Jiabao,ZHANG Lin,et al. Industrial metaverse for smart manufacturing:model,architecture,and applications[J]. IEEE Transactions on Cybernetics,2024,54(5):2683-2695. [7] ALOQAILY M,BOUACHIR O,KARRAY F,et al. Integrating digital twin and advanced intelligent technologies to realize the metaverse[J]. IEEE Consumer Electronics Magazine,2022,12(6):47-55. [8] WANG Jinjiang,YE Lunkuan,GAO R. X,et al. Digital Twin for rotating machinery fault diagnosis in smart manufacturing[J]. International Journal of Production Research,2019,57(12):3920-3934. [9] LEE Yihui,FONG Zhanghua. Study on building digital- twin of face-milled hypoid gear from measured tooth surface topographical data[J]. Journal of Mechanical Design,2020,142(11):1-13. [10] PENZL T. Algorithms for model reduction of large dynamical systems[J]. Linear Algebra and its Applications,2006,415(2-3):322-343. [11] BESSELINK B,TABAK U,LUTOWSKA A,et al. A comparison of model reduction techniques from structural dynamics,numerical mathematics and systems and control[J]. Journal of Sound and Vibration,2013,332(19):4403-4422. [12] SUN Gang,WANG Shuyue. A review of the artificial neural network surrogate modeling in aerodynamic design[J]. Proceedings of the Institution of Mechanical Engineers,Part G:Journal of Aerospace Engineering,2019,233(16):5863-5872. [13] HWANG J T,MARTINS J R.R.A. A fast-prediction surrogate model for large datasets[J]. Aerospace Science and Technology,2018,75:74-87. [14] GUO Junlang,LENG Jiewu,ZHAO J L,et al. Industrial metaverse towards Industry 5.0:connotation,architecture,enablers,and challenges[J]. Journal of Manufacturing Systems,2024,76:25-42. [15] CAO Jie,ZHU Xu,SUN Sumei,et al. Toward industrial metaverse:age of information,latency and reliability of short-packet transmission in 6G[J]. IEEE Wireless Communications,2023,30(2):40-47. [16] WANG Hang,NING Huansheng,LIN Yujia,et al. A survey on the metaverse:The state-of-the-art,technologies,applications,and challenges[J]. IEEE Internet of Things Journal,2023,10(16):14671-14688. [17] ZHENG Zhiming,LI Tan,LI Bohu,et al. Industrial metaverse:Connotation,features,technologies,applications and challenges[C]//Asian Simulation Conference. Singapore:Springer Nature Singapore,2022:239-263. [18] GRIEVES M. Digital twin :manufacturing excellence through virtual factory replication[J]. White Paper,2014,1:1-7. [19] GLAESSGEN E,STARGEL D. The digital twin paradigm for future NASA and US Air Force vehicles[C]//53rd AIAA/ASME/ASCE/AHS/ASC Structures,Structural Dynamics and Materials Conference 20th AIAA/ASME/ AHS Adaptive Structures Conference 14th AIAA. 2012:1818. [20] BOSCHERT S,ROSEN R. Digital twin—the simulation aspect[M]. London:Springer,2016. [21] MAZUMDER A,SAHED M F,TASNEEM Z,et al. Towards next generation digital twin in robotics:Trends,scopes,challenges,and future[J]. Heliyon,2023,9(2):e13359. [22] HAAG S,ANDERL R. Digital twin-proof of concept[J]. Manufacturing Letters,2018,15:64-66. [23] TAO F,ZHANG Meng. Digital twin shop-floor:a new shop-floor paradigm towards smart manufacturing[J]. IEEE Access,2017,5:20418-20427. [24] TAO Fei,ZHANG He,LIU Ang,et al. Digital twin in industry:State-of-the-art[J]. IEEE Transactions on Industrial Informatics,2018,15(4):2405-2415. [25] MIRANDA D. 2020 NASA technology taxonomy[R]. Washington:NASA,2020. [26] 宋学官,来孝楠,何西旺,等. 重大装备形性一体化数字孪生关键技术[J]. 机械工程学报,2022,58(10):298-325. SONG Xueguan,LAI Xiaonan,HE Xiwang,et al. Key Technologies of shape-performance integrated digital twin for major equipment[J]. Journal of Mechanical Engineering,2022,58(10):298-325. [27] MOURTZIS D. Digital twin inception in the Era of industrial metaverse[J]. Frontiers in Manufacturing Technology,2023,3:1155735. [28] STARLY B,KOPROV P,BHARADWAJ A,et al. “Unreal” factories:next generation of digital twins of machines and factories in the industrial metaverse[J]. Manufacturing Letters,2023,37:50-52. [29] HASAN H R,MADINE M,MUSAMIH A,et al. Non-fungible tokens (NFTs) for digital twins in the industrial metaverse:Overview,use cases,and open challenges[J]. Computers & Industrial Engineering,2024:110315. [30] YANG Bin,YANG Shuang,LÜ Zhihan,et al. Application of digital twins and metaverse in the field of fluid machinery pumps and fans:A review[J]. Sensors,2022,22(23):9294. [31] 陶飞,张萌,程江峰,等. 数字孪生车间—一种未来车间运行新模式[J]. 计算机集成制造系统,2017,23(1):1-9. TAO Fei,ZHANG Meng,CHENG Jiangfeng,et al. Digital twin workshop:A new paradigm for future workshop[J]. Computer Integrated Manufacturing Systems,2017,23(1):1-9. [32] 陶飞,程颖,程江峰,等. 数字孪生车间信息物理融合理论与技术[J]. 计算机集成制造系统,2017,23(8):1603-1611. TAO Fei,CHENG Ying,CHENG Jiangfeng,et al. Theories and technologies for cyber physical fusion in digital twin shop-floor[J]. Computer Integrated Manufacturing Systems,2017,23(8):1603-1611. [33] 刘志峰,陈伟,杨聪彬,等. 基于数字孪生的零件智能制造车间调度云平台[J]. 计算机集成制造系统,2019,25(6):1444-1453. LIU Zhifeng,CHEN Wei,YANG Congbin,et al. Intelligent manufacturing workshop dispatching cloud platform based on digital twins[J]. Computer Integrated Manufacturing Systems,2019,25(6):1444-1453. [34] 刘丹,黄海涛,王保兴,等. 基于数字孪生的再制造车间作业模式[J]. 计算机集成制造系统,2019,25(6):1515-1527. LIU Dan,HUANG Haitao,WANG Baoxing,et al. Operation paradigm for remanufacturing shop-floor based on digital twin[J]. Computer Integrated Manufacturing Systems,2019,25(6):1515-1527. [35] BAO Jinsong,GUO Dongsheng,LI Jie,et al. The modelling and operations for the digital twin in the context of manufacturing[J]. Enterprise Information Systems,2019,13(4):534-556. [36] PARK Y,WOO J,CHOI S S. A cloud-based digital twin manufacturing system based on an interoperable data schema for smart manufacturing[J]. International Journal of Computer Integrated Manufacturing,2020,33(12):1259-1276. [37] AIVALIOTIS P,GEORGOULIAS K,CHRYSSO LOURIS G. The use of Digital Twin for predictive maintenance in manufacturing[J]. International Journal of Computer Integrated Manufacturing,2019,32(11):1067-1080. [38] ALEXOPOULOS K,NIKOLAKIS N,CHRYSSO LOURIS G. Digital twin-driven supervised machine learning for the development of artificial intelligence applications in manufacturing[J]. International Journal of Computer Integrated Manufacturing,2020,33(5):429-439. [39] MILLWATER H,OCAMPO J,CROSBY N. Probabilistic methods for risk assessment of airframe digital twin structures[J]. Engineering Fracture Mechanics,2019,221:106674. [40] 董雷霆,周轩,赵福斌,等. 飞机结构数字孪生关键建模仿真技术[J]. 航空学报,2021,42(3):107-135. DONG Leiting,ZHOU Xuan,ZHAO Fubin,et. al. Key technologies for modeling and simulation of airframe digital twin[J]. Acta Aeronautica et Astronautica Sinica,2021,42(3):107-135. [41] TUEGEL E J,INGRAFFEA A R,EASON T G,et al. Reengineering aircraft structural life prediction using a digital twin[J]. International Journal of Aerospace Engineering,2011,2011(1):154798. [42] TUEGEL E. The airframe digital twin:some challenges to realization[C]//53rd AIAA/ASME/ASCE/AHS/ASC structures,structural dynamics and materials conference 20th AIAA/ASME/AHS adaptive structures conference 14th AIAA. 2012:1812. [43] LI Chenzhao,MAHADEVAN S,LING You,et al. Dynamic Bayesian network for aircraft wing health monitoring digital twin[J]. AIAA Journal,2017,55(3):930-941. [44] LIU Zheng,MEYENDORF N,MRAD N. The role of data fusion in predictive maintenance using digital twin[C]// AIP conference proceedings. AIP Publishing,2018. [45] YE Yumei,YANG Qiang,YANG Fan,et al. Digital twin for the structural health management of reusable spacecraft:A case study[J]. Engineering Fracture Mechanics,2020,234:107076. [46] YU Jinsong,SONG Yue,TANG Diyin,et al. A digital twin approach based on nonparametric Bayesian network for complex system health monitoring[J]. Journal of Manufacturing Systems,2021,58:293-304. [47] ZHANG Qiang,ZHENG Shouguo,YU Cijun,et al. Digital thread-based modeling of digital twin framework for the aircraft assembly system[J]. Journal of Manufacturing Systems,2022,65:406-420. [48] RASHEED A,SAN O,KVAMSDAL T. Digital twin:Values,challenges and enablers from a modeling perspective[J]. IEEE Access,2020,8:21980-22012. [49] HARTMANN D,HERZ M,WEVER U. Model order reduction a key technology for digital twins[J]. Reduced-Order Modeling (ROM) for Simulation and Optimization:Powerful Algorithms as Key Enablers for Scientific Computing,2018:167-179. [50] QU Zuqing. Model order reduction techniques with applications in finite element analysis:with applications in finite element analysis[M]. London:Springer Science & Business Media,2004. [51] YAE K H,JOENG K Y. Model reduction in the physical coordinate system[C]//Jet Propulsion Lab.,California Inst. of Tech.,Proceedings of the 3rd Annual Conference on Aerospace Computational Control,1989. [52] GUYAN R J. Reduction of stiffness and mass matrices[J]. AIAA Journal,1965,3(2):380. [53] O'CALLAHAN J. A procedure for an improved reduced system (IRS) model [C]// Proceedings of 7th International Model Analysis Conference,Las Vegas,1989:29-37. [54] 张德文. 改进Guyan~递推减缩技术[J]. 计算结构力学及其应用,1996(1):90-94. ZHANG Dewen. Improved Guyan ~ recursive reduction technique[J]. Computational Structural Mechanics and Applications,1996(1):90-94. [55] 张德文. 二级近似坐标缩聚法[J]. 机械强度,1995(1):64-66,63. ZHANG Dewen. Progressive approximation reduction of stiffness and mass matrices[J]. Journal of Mechanical Strength,1995(1):64-66,63. [56] 杨秋伟,张金鑫,李翠红. 结构模型缩聚的改进IRS方法[J]. 力学与实践,2020,42(5):588-593. YANG Qiuwei,ZHANG Jinxin,LI Cuihong. An Improved IRS method for structure model condensation[J]. Mechanics in Engineering,2020,42(5):588-593. [57] TIAN Wei,WENG Shun,XIA Qi,et al. Dynamic condensation approach for response-based finite element model updating of large-scale structures[J]. Journal of Sound and Vibration,2021,506:116176. [58] RIPEPI M,VERVELD M J,KARCHER N W,et al. Reduced-order models for aerodynamic applications,loads and MDO[J]. CEAS Aeronautical Journal,2018,9(1):171-193. [59] DONG S B,WOLF Jr J A. Stability analysis of structures by a reduced system of generalized coordinates[J]. International Journal of Solids and Structures,1970,6(10):1377-1388. [60] KIDDER R L. Reduction of structural frequency equations[J]. AIAA Journal,1973,11(6):892-892. [61] MILLER C A. Dynamic reduction of structural models[J]. Journal of the Structural Division,1980,106(10):2097-2108. [62] PAPADOPOULOS M,GARCIA E. Improvement in model reduction schemes using the system equivalent reduction expansion process[J]. AIAA Journal,1996,34(10):2217-2219. [63] WILSON E L,YUAN M W,DICKENS J M. Dynamic analysis by direct superposition of Ritz vectors[J]. Earthquake Engineering & Structural Dynamics,1982,10(6):813-821. [64] PRZEMIENIECKI J S. Matrix structural analysis of substructures[J]. AIAA Journal,1963,1(1):138-147. [65] HURTY W C. Dynamic analysis of structural systems using component modes[J]. AIAA Journal,1965,3(4):678-685. [66] CRAIG Jr R R,BAMPTON M C C. Coupling of substructures for dynamic analyses[J]. AIAA Journal,1968,6(7):1313-1319. [67] GOLDMAN R L. Vibration analysis by dynamic partitioning[J]. AIAA Journal,1969,7(6):1152-1154. [68] MACNEAL R H. A hybrid method of component mode synthesis[J]. Computers & Structures,1971,1(4):581-601. [69] 王缅,郑钢铁. 一种改进的固定界面模态综合法[J]. 宇航学报,2012,33(3):291-297. WANG Mian,ZHENG Gangtie. An improved fixed-interface modal synthesis method[J]. Journal of Astronautics,2012,33(3):291-297. [70] WU Long,TISO P,VAN KEULEN F. Interface reduction with multilevel Craig-Bampton substructuring for component mode synthesis[J]. AIAA Journal,2018,56(5):2030-2044. [71] CUI Jie,WANG Xing,XING Jianwei,et al. An eigenvector-based iterative procedure for the free-interface component modal synthesis method[J]. International Journal for Numerical Methods in Engineering,2018,116(12-13):723-740. [72] 刘营,李鸿光,李韵,等. 基于子结构的参数化模型降阶方法[J]. 振动与冲击,2020,39(16):148-154. LIU Ying,LI Hongguang,LI Yun,et al. A component-based parametric model order reduction method[J]. Journal of Vibration and Shock,2020,39(16):148-154. [73] HINTON G E,SALAKHUTDINOV R R. Reducing the dimensionality of data with neural networks[J]. Science,2006,313(5786):504-507. [74] SWISCHUK R,MAININI L,PEHERSTORFER B,et al. Projection-based model reduction:Formulations for physics-based machine learning[J]. Computers & Fluids,2019,179:704-717. [75] KHALID S,KHALIL T,NASREEN S. A survey of feature selection and feature extraction techniques in machine learning[C]//2014 Science and Information Conference. IEEE,2014:372-378. [76] HOU C K J,BEHDINAN K. Dimensionality reduction in surrogate modeling:a review of combined methods[J]. Data Science and Engineering,2022,7(4):402-427. [77] KUMAR V,MINZ S. Feature selection:A literature review[J]. SmartCR,2014,4(3):211-229. [78] KIRA K,RENDELL L A. A practical approach to feature selection[M]. Aberdeen:Morgan Kaufmann,1992. [79] RAO Haidi,SHI Xianzhang,RODRIGUE A K,et al. Feature selection based on artificial bee colony and gradient boosting decision tree[J]. Applied Soft Computing,2019,74:634-642. [80] 武文,段雪峰. 基于内积正则化的自表示无监督特征选择算法[J]. 桂林电子科技大学学报,2021,41(6):516-520. WU Wen,DUAN Xuefeng. Unsupervised feature selection algorithm based on inner product regularized self-representation[J]. Journal of Guilin University of Electronic Technology,2021,41(6):516-520. [81] ZEBARI R,ABDULAZEEZ A,ZEEBAREE D,et al. A comprehensive review of dimensionality reduction techniques for feature selection and feature extraction[J]. Journal of Applied Science and Technology Trends,2020,1(2):56-70. [82] LEE D D,SEUNG H S. Learning the parts of objects by non-negative matrix factorization[J]. Nature,1999,401(6755):788-791. [83] TIAN Kuo,WANG Bo,ZHOU Yan,et al. Proper-orthogonal-decomposition-based buckling analysis and optimization of hybrid fiber composite shells[J]. AIAA Journal,2018,56(5):1723-1730. [84] 魏代同,陈星,陈玉刚,等. 基于本征正交分解的叶片碰摩系统降阶方法[J]. 航空动力学报,2022,37(4):711-720. WEI Daitong,CHEN Xing,CHEN Yugang,et al. Reduced order method of blade rubbing system based on proper orthogonal decomposition[J]. Journal of Aerospace Power,2022,37(4):711-720. [85] FORRESTER A,SOBESTER A,KEANE A. Engineering design via surrogate modelling:A practical guide[M]. West Sussex:John Wiley & Sons,2008. [86] KHURI A I,MUKHOPADHYAY S. Response surface methodology[J]. Wiley Interdisciplinary Reviews:Computational Statistics,2010,2(2):128-149. [87] BUHMANN M D. Radial basis functions[J]. Acta Numerica,2000,9:1-38. [88] OLIVER M A,WEBSTER R. Kriging:a method of interpolation for geographical information systems[J]. International Journal of Geographical Information System,1990,4(3):313-332. [89] DRUCKER H,BURGES C J,KAUFMAN L,et al. Support vector regression machines[J]. Advances in Neural Information Processing Systems,1996,9:155-161. [90] LANCASTER P,SALKAUSKAS K. Surfaces generated by moving least squares methods[J]. Mathematics of Computation,1981,37(155):141-158. [91] 何西旺,杨亮亮,冉仁杰,等. 基于多评价标准的代理模型综合比较研究[J]. 机械工程学报,2022,58(16):403-419. HE Xiwang,YANG Liangliang,RAN Renjie,et al. Comparative studies of surrogate models based on multiple evaluation criteria[J]. Journal of Mechanical Engineering,2022,58(16):403-419. [92] MAJDISOVA Z,SKALA V. Radial basis function approximations:comparison and applications[J]. Applied Mathematical Modelling,2017,51:728-743. [93] SUN Guangyong,SONG Xueguan,BAEK S,et al. Robust optimization of foam-filled thin-walled structure based on sequential Kriging metamodel[J]. Structural and Multidisciplinary Optimization,2014,49(6):897-913. [94] ROY A,CHAKRABORTY S. Support vector regression based metamodel by sequential adaptive sampling for reliability analysis of structures[J]. Reliability Engineering & System Safety,2020,200:106948. [95] TEY W Y,CHE SIDIK N A,ASAKO Y,et al. Moving least squares method and its improvement:A concise review[J]. Journal of Applied and Computational Mechanics,2021,7(2):883-889. [96] HAN Zhonghua,GÖRTZ S. Hierarchical kriging model for variable-fidelity surrogate modeling[J]. AIAA Journal,2012,50(9):1885-1896. [97] GISELLE FERNÁNDEZ-GODINO M,PARK C,KIM N H,et al. Issues in deciding whether to use multifidelity surrogates[J]. AIAA Journal,2019,57(5):2039-2054. [98] VADYALA S R,BETGERI S N,MATTHEWS J C,et al. A review of physics-based machine learning in civil engineering[J]. Results in Engineering,2022,13:100316. [99] PEHERSTORFER B,WILLCOX K. Dynamic data-driven reduced-order models[J]. Computer Methods in Applied Mechanics and Engineering,2015,291:21-41. [100] GUO Mengwu,HESTHAVEN J S. Data-driven reduced order modeling for time-dependent problems[J]. Computer Methods in Applied Mechanics and Engineering,2019,345:75-99. [101] WU Pin,SUN Junwu,CHANG Xuting,et al. Data-driven reduced order model with temporal convolutional neural network[J]. Computer Methods in Applied Mechanics and Engineering,2020,360:112766. [102] SWISCHUK R,MAININI L,PEHERSTORFER B,et al. Projection-based model reduction:formulations for physics-based machine learning[J]. Computers & Fluids,2019,179:704-717. [103] REN K,CHEW Y,ZHANG Y F,et al. Thermal field prediction for laser scanning paths in laser aided additive manufacturing by physics-based machine learning[J]. Computer Methods in Applied Mechanics and Engineering,2020,362:112734. [104] YU Y,YAO H,LIU Y. Structural dynamics simulation using a novel physics-guided machine learning method[J]. Engineering Applications of Artificial Intelligence,2020,96:103947. [105] WEI Han,BAO Hua,RUAN Xiulin. Machine learning prediction of thermal transport in porous media with physics-based descriptors[J]. International Journal of Heat and Mass Transfer,2020,160:120176. [106] MURAVYOV A A,RIZZI S A. Determination of nonlinear stiffness with application to random vibration of geometrically nonlinear structures[J]. Computers & Structures,2003,81(15):1513-1523. [107] MCEWAN M,WRIGHT J,COOPER J,et al. A finite element/modal technique for nonlinear plate and stiffened panel response prediction[C]//19th AIAA Applied Aerodynamics Conference,2001:1595. [108] HOLLKAMP J,GORDON R,SPOTTSWOOD S. Nonlinear sonic fatigue response prediction from finite element modal models:a comparison with experiments[C]//44th AIAA/ASME/ASCE/AHS/ASC Structures,Structural Dynamics,and Materials Conference,2003:1709. [109] NASH M. Nonlinear structural dynamics by finite element modal synthesis[D]. London:Imperial College,1977. [110] MIGNOLET M P,PRZEKOP A,RIZZI S A,et al. A review of indirect/non-intrusive reduced order modeling of nonlinear geometric structures[J]. Journal of Sound and Vibration,2013,332(10):2437-2460. [111] SHI Y,MEI C. A finite element time domain modal formulation for large amplitude free vibrations of beams and plates[J]. Journal of Sound and Vibration,1996,193(2):453-464. [112] SCHULZE J C,MITSOS A. Nonlinear model order reduction of dynamical systems in process engineering:review and comparison[J]. Nonlinear dynamics,2026,114(9):630. [113] LEE J,LEE J,CHO H,et al. Reduced-order modeling of nonlinear structural dynamical systems via element-wise stiffness evaluation procedure combined with hyper-reduction[J]. Computational Mechanics,2021,67:523-540. [114] HOLLKAMP J J,GORDON R W,SPOTTSWOOD S M. Nonlinear modal models for sonic fatigue response prediction:a comparison of methods[J]. Journal of Sound and Vibration,2005,284(3-5): 1145-1163. [115] HOLLKAMP J J,GORDON R W. Reduced-order models for nonlinear response prediction:Implicit condensation and expansion[J]. Journal of Sound and Vibration,2008,318(4-5):1139-1153. [116] KUETHER R J,ALLEN M S,HOLLKAMP J J. Modal substructuring of geometrically nonlinear finite-element models[J]. AIAA Journal,2016,54(2):691-702. [117] PARK K,ALLEN M S. A Gaussian process regression reduced order model for geometrically nonlinear structures[J]. Mechanical Systems and Signal Processing,2023,184:109720. [118] KAPTEYN M G,KNEZEVIC D J,WILLCOX K. Toward predictive digital twins via component-based reduced-order models and interpretable machine learning[C]//AIAA Scitech 2020 Forum,2020:0418. [119] KAPTEYN M G,KNEZEVIC D J,HUYNH D B P,et al. Data-driven physics-based digital twins via a library of component-based reduced-order models[J]. International Journal for Numerical Methods in Engineering,2022,123(13):2986-3003. [120] ZHOU Tong,PENG Yongbo. Kernel principal component analysis-based Gaussian process regression modelling for high-dimensional reliability analysis[J]. Computers & Structures,2020,241:106358. [121] XIAO D,FANG F,PAIN C C,et al. Non-intrusive reduced order modeling of multi-phase flow in porous media using the POD-RBF method[J]. Journal of Computational Physics,2015,1:1-25. [122] FARHAT C,CHAPMAN T,AVERY P. Structure-preserving,stability,and accuracy properties of the energy-conserving sampling and weighting method for the hyper reduction of nonlinear finite element dynamic models[J]. International Journal for Numerical Methods in Engineering,2015,102(5):1077-1110. [123] FENG Xiangyou,BAI Fan,DING Hao,et al. An improved POD-Galerkin method for rapid prediction of three-dimensional temperature field for an IGBT module[J]. International Communications in Heat and Mass Transfer,2024,152:107241. [124] GEELEN R,WRIGHT S,WILLCOX K. Operator inference for non-intrusive model reduction with quadratic manifolds[J]. Computer Methods in Applied Mechanics and Engineering,2023,403:115717. [125] KARNIADAKIS G E,KEVREKIDIS I G,LU L,et al. Physics-informed machine learning[J]. Nature Reviews Physics,2021,3(6):422-440. [126] HE Wewei,LI Jinzhao,KONG Xuan,et al. Multi-level physics informed deep learning for solving partial differential equations in computational structural mechanics[J]. Communications Engineering,2024,3(1):151. [127] YANG Jun,SUI Xi,HUANG Yanping,et al. Assessment of reactor flow field prediction based on deep learning and model reduction[J]. Annals of Nuclear Energy,2022,179:109367. [128] KANNAPINN M,PHAM M K,SCHÄFER M. Physics-based Digital Twins for autonomous thermal food processing:Efficient,non-intrusive reduced-order modeling[J]. Innovative Food Science & Emerging Technologies,2022,81:103143. [129] GROTH C,PORZIANI S,BIANCOLINI M,et al. The medical digital twin assisted by reduced order models and mesh morphing[C]//International CAE Conference. 2018:10. [130] LIN Tao,PEI Zhiyong,XIAO Longhui,et al. Application of fluid pressure field order reduction method in ship digital twin[C]//ISOPE International Ocean and Polar Engineering Conference. ISOPE,2022:ISOPE-I-22-528. [131] WANG Liang,DONG Xueqing,JING Lantao,et al. Research on digital twin modeling method of transformer temperature field based on POD[J]. Energy Reports,2023,9:299-307. [132] DONG Qing,HE Bin,QI Qisong,et al. Real-time prediction method of fatigue life of bridge crane structure based on digital twin[J]. Fatigue & Fracture of Engineering Materials & Structures,2021,44(9):2280-2306. [133] WANG Shuo,LAI Xiaonan,HE Xiwang,et al. Building a trustworthy product-level shape-performance integrated digital twin with multifidelity surrogate model[J]. Journal of Mechanical Design,2022,144(3):031703. [134] CAO Yu,TANG Xiaobo,GAIDAI O,et al. Digital twin real time monitoring method of turbine blade performance based on numerical simulation[J]. Ocean Engineering,2022,263:112347. [135] ZHOU Xuan,HE Shuangxin,DONG Leiting,et al. Real-time prediction of probabilistic crack growth with a helicopter component digital twin[J]. AIAA Journal,2022,60(4):2555-2567. [136] RITTO T G,ROCHINHA F A. Digital twin,physics-based model,and machine learning applied to damage detection in structures[J]. Mechanical Systems and Signal Processing,2021,155:107614. [137] GONG Helin,CHENG Sibo,CHEN Zhang,et al. Data-enabled physics-informed machine learning for reduced-order modeling digital twin:application to nuclear reactor physics[J]. Nuclear Science and Engineering,2022,196(6):668-693. [138] PENG Xiaojun,CHEN Zhangdong,ZHANG Aoming,et al. Digital twin temperature field prediction of laser powder bed fusion through proper orthogonal decomposition with radial basis function[J]. Materials Today Communications,2023,55:107883. [139] HE Xiwang,YANG Liang,PANG Yong,et al. PSDM:A parametrized structural dynamic modeling method based on digital twin for performance prediction[J]. Engineering Structures,2024,316:118582. [140] HE Xiwang,LI Kunpeng,WANG Shuo,et al. Toward an online monitoring of structural performance based on physics-informed hybrid modeling method[J]. Journal of Mechanical Design,2024,146(1):011702. [141] HE Xiwang,LAI Xiaonan,LI Kunpeng,et al. Toward a shape-performance integrated digital twin based on hybrid reduced-order modeling for engineering structures[J]. Engineering with Computers,2024,40(2):1157-1175. |
| [1] | SU Yonglei, YIN Daozhi, ZHANG Zhifei, DING Zhi. Lightweight Design Method for Vehicle Body Mega-casting Components [J]. Journal of Mechanical Engineering, 2026, 62(5): 306-318. |
| [2] | HUANG Sihan, PENG Zhicheng, ZHU Qizhang, WANG Bocun, ZHANG Mingrui, MA Ni, LENG Jiewu, ZHENG Pai, JING Shikai, WANG Guoxin, YAN Yan. Digital Twin Modeling and Distributed Virtual Collaboration Method of Human-centric Smart Manufacturing System in the Context of Industrial Metauniverse [J]. Journal of Mechanical Engineering, 2025, 61(15): 385-398. |
| [3] | WANG Yuefei, WANG Chao, XU Yutao, SUN Rui, XIAO Kai, WANG Kailin. Digital Twin Task Scheduling Method for Jobs of Intelligent Manufacturing Unit under Edge-cloud Collaboration [J]. Journal of Mechanical Engineering, 2024, 60(6): 137-152. |
| [4] | ZHOU Zude, YAO Bitao. Scientific System and Technology Framework of Digital Manufacturing [J]. Journal of Mechanical Engineering, 2023, 59(19): 126-151. |
| [5] | MA Nanfeng, YAO Xifan, CHEN Feixiang, YU Hongjun, WANG Kesai. Human-centric Smart Manufacturing for Industry 5.0 [J]. Journal of Mechanical Engineering, 2022, 58(18): 88-102. |
| Viewed | ||||||
|
Full text |
|
|||||
|
Abstract |
|
|||||
