• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (18): 399-410.doi: 10.3901/JME.260953

Previous Articles    

Study on Damage of Insulated Rail Joints under Wheel-rail Cyclic Rolling Contact

ZHOU Zhijun1, YANG Chenyu1, GUO Tao2, TAO Gongquan1, WEN Zefeng1   

  1. 1. State Key Laboratory of Rail Transit Vehicle System, Southwest Jiaotong University, Chengdu 610031;
    2. Zhan Tianyou College (CRRC College), Dalian Jiaotong University, Dalian 116028
  • Received:2025-11-21 Revised:2026-05-22 Published:2026-11-20

Abstract: Insulated rail joints(IRJs) are a critical component in rail track as they serve as both a mechanical connector and an electrical insulator; however, they are also one of the most susceptible components to damage. In this study, a three-dimensional finite element model of wheel-rail cyclic rolling contact is presented that accounts for the structural and material discontinuities in the IRJs. The model uses a substructure reduction, a wheel superelement, and several user subroutines to efficiently simulate the evolution of contact stresses and strains as the wheel roll through the IRJs, focusing on the damage mechanisms involved. The results show that the discontinuity of the IRJs leads to abrupt changes in the distribution of contact pressure and surface shear stress on the rail surfaces at the IRJs, resulting in significant stress concentrations and asymmetries. After the wheels roll, the right side of the IRJs is subjected to higher equivalent stress and equivalent plastic strain, with the accumulation rate of plastic strain being significantly higher than that on the left side, making it more susceptible to ratcheting effects and possible damage. As the number of wheel-rail rolling cycles and the creepage increase, the accumulated plastic strain leads to an increase in the height difference and rail depression, which progressively exacerbates the geometric irregularities and deterioration of the IRJs.

Key words: insulated rail joints, fatigue damage, wheel-rail cyclic rolling contact, finite element method, ratcheting

CLC Number: