• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (18): 330-338.doi: 10.3901/JME.260638

Previous Articles    

Study on Vacuum Current-Carrying Friction and Wear Properties of Cross-Accumulative Roll-Bonded Cu/Ag Composite Materials

LUO Xiaowu1,2,3, LI Pu1,2,3,4, ZHOU Qinghua1,2,3, ZHANG Qiang5, LIU Yanmin5, DENG Chaowen6, YANG Lin6   

  1. 1. School of Aeronautics and Astronautics, Sichuan University, Chengdu 610065;
    2. Key Laboratory of Advanced Spatial Mechanism and Intelligent Spacecraft(Ministry of Education), Chengdu 610065;
    3. Robotic Satellite Key Laboratory of Sichuan Province, Sichuan University, Chengdu 610065;
    4. State Key Laboratory of Mechanical Transmission for Advanced Equipment, Chongqing University, Chongqing 400044;
    5. Beijing Institute of Control Engineering, Beijing 100190;
    6. School of Mechanical Engineering, Chengdu University, Chengdu 610106
  • Received:2025-10-31 Revised:2026-06-29 Published:2026-11-20

Abstract: Space ultra-precision conductive slip rings are often subjected to the combined action of various complex working conditions during service:the vacuum environment leads to the failure of traditional lubrication mechanisms; the electro-thermal-mechanical multi-physics field coupling induces the synergistic degradation of material properties; micro-vibrations and shocks are prone to triggering arc discharge, thereby exacerbating interfacial wear; meanwhile, the migration and accumulation of wear debris are likely to cause surface discharge, electrical breakdown and other failure phenomena. These factors are mutually coupled and reinforced, which seriously restricts the service performance and operational stability of space sliding collector rings. To meet the long-life and high-reliability power transmission requirements of space conductive slip rings, Cu/Ag multilayer composites were prepared by cross-accumulative roll bonding(CARB) technology in this study. The interfacial bonding characteristics and friction-wear properties under vacuum current-carrying conditions were systematically investigated, realizing the synergistic optimization of hardness, current-carrying friction-wear properties and electrical conductivity. The results of micro-region mechanical property and electrical conductivity tests show that the CARB process significantly improves the mechanical and electrical properties of the materials. Among them, the hardness of the Cu/Ag multilayer composites formed by cross-roll bonding reaches 102.7 HV, and the electrical conductivity is increased to 107.4% IACS. The strengthening effect is mainly attributed to the excellent interfacial bonding quality as well as dislocation strengthening and grain refinement strengthening. Further vacuum current-carrying friction-wear tests indicate that the Cu/Ag multilayer composites exhibit the minimum electrical noise and low wear rate, achieving the most outstanding comprehensive performance. This study confirms the significant advantages of layered structure design based on the CARB process in improving the current-carrying performance of materials, providing new ideas and theoretical support for the development of high-performance Cu/Ag composites for space conductive slip rings.

Key words: cross-accumulation and rolling, Cu/Ag composites, micro-region mechanical property, space conductive slip ring, vacuum current-carrying friction-wear

CLC Number: