• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (17): 430-442.doi: 10.3901/JME.260706

Previous Articles    

Study on the Thermo-mechanical Coupling Characteristics and Surface Integrity of Creep Feed Grinding of γ-TiAl Alloys

SHI Kaining1,2, LI Huhu1,2, NIU Zhanhao3, LI Jiale1,2, ZHANG Zhaoqing1,2   

  1. 1. Key Laboratory of High Performance Manufacturing for Aero Engine (Ministry of Industry and Information Technology), Northwestern Polytechnical University, Xi'an 710072;
    2. Engineering Research Center of Advanced Manufacturing Technology for Aero Engine (Ministry of Education), Northwestern Polytechnical University, Xi'an 710072;
    3. AVIC Xi'An Aircraft Industry Group Co., Ltd., Xi'an 710089
  • Received:2025-09-11 Revised:2025-12-26 Published:2026-11-20

Abstract: γ-TiAl alloys are recognized as promising materials for critical components in aero-engines due to their superior fatigue resistance and high-temperature oxidation resistance. However, challenges such as narrow thermal processing windows, strain sensitivity, and intrinsic brittleness lead to machining-induced damages and defects, including residual tensile stresses, microcracks, and burns, under thermomechanical loads during cutting processes. To address the difficulty in controlling surface integrity during creep-feed grinding of third-generation γ-TiAl alloys (TNM), the influence of process parameters on grinding forces and temperatures, as well as surface state variations induced by thermomechanical coupling, are investigated through finite element simulations and grinding experiments. The formation mechanisms of surface integrity in TNM alloy creep-feed grinding are elucidated. Results demonstrate that grinding forces and temperatures exhibit distinct variation patterns with increasing process parameters, where grinding forces exert a more significant impact on surface integrity than temperatures. As thermomechanical coupling intensifies, surface morphology degrades systematically, surface roughness increases, hardening effects become pronounced, and hardened layer thickness deepens. Residual compressive stresses dominate the ground surface, but their magnitude gradually diminishes with rising grinding temperatures, accompanied by increased dislocation entanglement and thickened plastic deformation layers. An integrated model correlating grinding parameters, thermomechanical coupling, and surface integrity is established, providing theoretical and technical guidance for optimizing high-integrity creep-feed grinding processes of TNM alloys.

Key words: γ-TiAl alloy, creep feed grinding, processing parameters, thermo-mechanical coupling, surface integrity

CLC Number: