• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (17): 413-429.doi: 10.3901/JME.260549

Previous Articles    

3D Tolerance Analysis of Aircraft Four-bar Linkage Doors Based on an Improved SOTA Method

YANG Rui, YANG Linkai, WEI Lei, SUN Shiyong   

  1. School of Mechanical Engineering, Dalian University of Technology, Dalian 116024
  • Received:2025-04-01 Revised:2026-03-25 Published:2026-11-20

Abstract: An effective deviation modeling and analysis method for complex spatial mechanisms, such as aircraft four-bar linkage doors composed of multiple parallel structures, is currently unavailable. This results in difficulties in predicting assembly deviations and a lack of effective verification for tolerance design schemes. To address these issues, a 3D tolerance analysis method for complex assemblies that considers multiple parallel structures and mechanism motion characteristics is proposed. The deviations in parallel structures are first described equivalently based on the small displacement torsor theory, simplifying the door from a complex spatial mechanism into a planar mechanism. Tolerance principles are applied to equivalently combine mating deviations and geometric feature deviations into comprehensive deviations. The vector loop model of the door is established by considering the upper and lower steps between the fuselage and the follow-up door in the closed state as functional requirements. A modified forward finite difference method is then introduced to improve the efficiency of solving influence coefficients of Taylor expansion, and singular value decomposition is employed to resolve underdetermined assembly equations. The second-order tolerance analysis method is improved to enhance the efficiency and generality of solving the vector loop model. Finally, the proposed method is applied to perform a 3D tolerance analysis of the four-bar linkage door. The cumulative assembly deviations of the door are obtained, providing a reference for evaluating the rationality of tolerance design schemes.

Key words: 3D tolerance analysis, second-order tolerance analysis, vector loop model, four-bar linkage door

CLC Number: