• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (17): 224-235.doi: 10.3901/JME.260654

Previous Articles    

Design and Analytical Inverse Kinematics of a 7-DOF Humanoid Manipulator Based on a Serial-parallel Hybrid Actuation Architecture

LIU Hui1, LIANG Zhenjie1,2, SUN Zeyuan1, NIU Fuliang1, CHENG Jingwen1, TAO Yong3   

  1. 1. China North Artificial Intelligence & Innovation Research Institute, Beijing 100070;
    2. School of Materials Science and Engineering, Zhejiang University, Hangzhou 310027;
    3. School of Mechanical Engineering and Automation, Beihang University, Beijing 100191
  • Received:2025-12-07 Revised:2026-06-02 Published:2026-11-20

Abstract: To address the challenge of simultaneously achieving motion flexibility, payload capacity, and structural compactness in humanoid robot upper limbs, a seven-degree-of-freedom manipulator based on a hybrid serial-parallel actuation architecture is proposed. Built upon an overall serial kinematic configuration, the robotic arm incorporates a biomimetic parallel-driven mechanism at the wrist to emulate the coordinated multi-tendon motion characteristics of the human wrist. This design not only facilitates compatibility with teleoperation-based imitation learning methods, but also improves end-effector posture stiffness and dynamic response performance. In addition, an offset elbow joint structure is adopted to effectively enlarge the workspace and optimize the distribution of redundant degrees of freedom while maintaining structural compactness. Based on the proposed manipulator configuration, a complete kinematic model is established. Furthermore, to address the redundancy characteristics of the seven-degree-of-freedom manipulator, an inverse kinematics solution method with explicit geometric interpretation is proposed, avoiding the low efficiency and instability associated with conventional numerical iterative approaches. Experimental and simulation results demonstrate that the robotic arm exhibits excellent flexibility, stability, and trajectory tracking performance in teleoperation-based motion tracking tasks. The proposed inverse kinematics method achieves high computational efficiency and strong numerical stability, satisfying the requirements of real-time control. Overall, the results fully validate the effectiveness and engineering feasibility of the proposed design and modeling approach, providing a new technical pathway for the development of highly integrated humanoid robotic upper-limb systems.

Key words: humanoid robot, seven-degree-of-freedom manipulator, serial-parallel hybrid actuation, biomimetic parallel wrist, inverse kinematics

CLC Number: