• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (17): 156-167.doi: 10.3901/JME.260823

Previous Articles    

Constraint-identification-based Hierarchical Planning for Fuel Tank Cap Operation

ZHANG Haochen1, WEI Hongxing1, WANG Dianjun2, LI Zeyu1   

  1. 1. School of Mechanical Engineering and Automation, Beihang University, Beijing 100191;
    2. Mechanical Engineering Academy, Beijing Institute of Petro-Chemical Technology, Beijing 102617
  • Received:2026-02-17 Revised:2026-07-23 Published:2026-11-20

Abstract: Conventional refueling robots operating in environments with incomplete information need the capability to perceive and understand the manipulated objects either autonomously or with human assistance. To overcome the limitation of robot autonomy imposed by pre-defined offline trajectories, a Constraint-Identification-based Hierarchical Planning (CIHP) method is proposed. First, according to the actual constraint observed in real scenarios, a parameterized constrained kinematic model of the robot-object system is established. Then, task prior data are acquired through a human-robot interaction embodied guidance approach, and the model parameters are subsequently identified. The optimal opening trajectory of the fuel tank cap is hierarchically solved by utilizing the mutual independence between the primary task space and the redundant constrained null space, while satisfying secondary optimization objectives such as tool posture keeping. Experimental results demonstrate that, compared with the principal component analysis (PCA)-based trajectory fitting method, the proposed CIHP method achieves shorter task duration, lower energy consumption, and faster convergence of contact force, verifying its superior planning performance. The CIHP method enhances the robot’s embodied perception of task constraints, providing both theoretical and engineering bases for autonomous planning in complex non-rigid contact manipulation tasks.

Key words: refueling robot, parametric modeling, constraint identification, hierarchical planning, trajectory planning

CLC Number: