Numerical Simulation of Cumulative Wheel Tread Damage under Continuous Braking of Heavy-haul Trains
ZHANG Jinyu1,2, ZUO Jianyong1,2
1. College of Transportation, Tongji University, Shanghai 201804; 2. Shanghai Key Laboratory of Rail Infrastructure Durability and System Safety, Tongji University, Shanghai 201804
[1] ZHANG M,SHI C,WANG K,et al. Optimization study of pneumatic-electric combined braking strategy for 30000-ton heavy-haul trains[J]. Actuators,2025,14(1):40. [2] BULAKH M. Freight wagon body design with increased load capacity[J]. Scientific Reports,2025,15(1):13189. [3] GÜNAY M,KORKMAZ M E,ÖZMEN R. An investigation on braking systems used in railway vehicles[J]. Engineering Science and Technology,an International Journal,2020,23(2):421-431. [4] WU Q,COLE C,SPIRYAGIN M,et al. Freight train air brake models[J]. International Journal of Rail Transportation,2023,11(1):1-49. [5] MILOŠEVIĆ M S,STAMENKOVIĆ D S,MILOJEVIĆ A P,et al. Modeling thermal effects in braking systems of railway vehicles[J]. Thermal Science,2012,16(Suppl.2):515-526. [6] ZHANG J,TAO G,WEN Z. Influence of operating parameters on the temperature rise of the wheel tread of a freight wagon when braking on a long downhill ramp[J]. Tribology Transactions,2026,69(2):394-410. [7] ZUO J,WANG X,ZHOU S,et al. Simulation and experimental study on abrasive wear of brake discs[J]. Tribology Transactions,2022,65(4):610-620. [8] ZHANG J,ZUO J. Numerical thermo-mechanical modeling of tread braking systems under ultra-long downhill constant-speed conditions with coupled time-dependent heat partition coefficients[J]. International Communications in Heat and Mass Transfer,2025,169:109713. [9] WANG B,WU Q,LUO S,et al. Wheel tread temperature assessment and its impact on rolling contact fatigue under long-term braking conditions[J]. Tribology International,2024,200:110162. [10] SHRESTHA S,SPIRYAGIN M,BERNAL E,et al. Recent advances in wheel-rail RCF and wear testing[J]. Friction,2023,11(12):2181-2203. [11] ZHU Y,YANG Y,MU X,et al. Study on wear and RCF performance of repaired damage railway wheels:Assessing laser cladding to repair local defects on wheels[J]. Wear,2019,430:126-136. [12] ZHANG S Y,SPIRYAGIN M,DING H H,et al. Rail rolling contact fatigue formation and evolution with surface defects[J]. International Journal of Fatigue,2022,158:106762. [13] SRIVASTAVA J P,SARKAR P K,RANJAN V. Effects of thermal load on wheel-rail contacts:A review[J]. Journal of Thermal Stresses,2016,39(11):1389-1418. [14] PENG D,JONES R,CONSTABLE T. An investigation of the influence of rail chill on crack growth in a railway wheel due to braking loads[J]. Engineering Fracture Mechanics,2013,98:1-14. [15] LANDSTRÖM E V,VERNERSSON T,LUNDÉN R. Analysis and testing of tread braked railway wheel-effects of hot spots on wheel performance[J]. International Journal of Fatigue,2024,180:108116. [16] VOORTMAN LANDSTRÖM E,VERNERSSON T,LUNDÉN R. Characterisation and evaluation of global uneven heating during railway tread braking-brake rig testing and field study[J]. Proceedings of the Institution of Mechanical Engineers,Part F:Journal of Rail and Rapid Transit,2025,239(3):258-271. [17] NAEIMI M,LI S,LI Z,et al. Thermomechanical analysis of the wheel-rail contact using a coupled modelling procedure[J]. Tribology International,2018,117:250-260. [18] LANDSTRÖM E V,STEYN E,AHLSTRÖM J,et al. Thermomechanical testing and modelling of railway wheel steel[J]. International Journal of Fatigue,2023,168:107373. [19] ZHANG J,CHEN X,TAO G,et al. Effect of thermal load caused by tread braking on crack propagation in railway wheels on long downhill ramps[J]. Lubricants,2024,12(10):356. [20] CVETKOVSKI K,AHLSTRÖM J,KARLSSON B. Thermal softening of fine pearlitic steel and its effect on the fatigue behaviour[J]. Procedia Engineering,2010,2(1):541-545. [21] WU J,PETROV R H,NAEIMI M,et al. Laboratory simulation of martensite formation of white etching layer in rail steel[J]. International Journal of Fatigue,2016,91:11-20. [22] YANG Y,AYDIN A,MUMTAZ K,et al. Novel use of laser melting and optical pre-heat to control white etching layer formation on rail steels[J]. Tribology International,2025,204:110472. [23] LIU J P,HUANG H,LIU A,et al. Formation mechanism of white etching layers in pearlitic rail steels under continuous abrasion[J]. Wear,2025,572:206050. [24] WALIA M S,ESMAEILI A,VERNERSSON T,et al. Thermomechanical capacity of wheel treads at stop braking:A parametric study[J]. International Journal of Fatigue,2018,113:407-415. [25] DERESSA K T,AMBIE D A. Non-axisymmetric modeling of a moving heat source for thermal stress and fatigue analysis of railway vehicle disc brakes[J]. Urban Rail Transit,2024,10(1):42-64. [26] FEC M C,SEHITOGLU H. Thermal-mechanical damage in railroad wheels due to hot spotting[J]. Wear,1985,102(1-2):31-42. [27] MOYAR G J,STONE D H. An analysis of the thermal contributions shelling to railway wheel[J]. Wear,1991,144:117-138. [28] LIU X,ZHAO W,CONG T,et al. The effects of hardness on the spalling property of railway wheel steel[J]. Wear,2022,504:204429. [29] CAPRIOLI S,VERNERSSON T,HANDA K,et al. Thermal cracking of railway wheels:Towards experimental validation[J]. Tribology International,2016,94:409-420. [30] HANDA K,MORIMOTO F. Influence of wheel/rail tangential traction force on thermal cracking of railway wheels[J]. Wear,2012,289:112-118. [31] VERNERSSON T. Thermally induced roughness of tread braked railway wheels:Part 2:Modelling and field measurements[J]. Wear,1999,236(1-2):106-116. [32] TIAN Y,TAN Z,ZHANG J,et al. Microstructure stability in wheel steel:A case of thermal-accumulated damage capacity in pearlite and low-carbon bainite[J]. Engineering Failure Analysis,2023,154:107656. [33] ZHANG L,QI Y. Research on the wheel wear prediction of heavy-haul freight wagon based on the roller rig test and line test[J]. Industrial Lubrication and Tribology,2025,77(6):1016-1027. [34] MAGELLI M,PAGANO R,ZAMPIERI N. Adapting a scaled twin-disc device for tread braking investigations based on an ad-hoc thermal similitude model[J]. Wear,2025,574:206105. [35] GHAFELEHBASHI S M E,TALAEE M R. An analytical thermal model of a railway vehicle brake shoe[J]. Proceedings of the Institution of Mechanical Engineers,Part F:Journal of Rail and Rapid Transit,2022,236(4):375-385. [36] SINISCALCHI R,CANTONE L. Two fast models to compute the thermal field in wagons with brake blocks via finite differences[J]. Proceedings of the Institution of Mechanical Engineers,Part F:Journal of Rail and Rapid Transit,2025,239(3):211-221. [37] WASILEWSKI P. Frictional heating in railway brakes:A review of numerical models[J]. Archives of Computational Methods in Engineering,2020,27(1):45-58. [38] HAIDARI A,HOSSEINI-TEHRANI P. Fatigue analysis of railway wheels under combined thermal and mechanical loads[J]. Journal of Thermal Stresses,2014,37(1):34-50. [39] HAIDARI A,HOSSEINI-TEHRANI P. Thermal load effects on fatigue life of a cracked railway wheel[J]. Latin American Journal of Solids and Structures,2015,12:1144-1157. [40] YANG Z,DENG X,LI Z. Numerical modeling of dynamic frictional rolling contact with an explicit finite element method[J]. Tribology International,2019,129:214-231. [41] DENG X,QIAN Z,DOLLEVOET R. Lagrangian explicit finite element modeling for spin-rolling contact[J]. Journal of Tribology,2015,137(4):041401. [42] ZHANG J,DING J,ZUO J. Development of a non-uniform heat source model for accurate prediction of wheel tread temperature on long downhill ramps[J]. Lubricants,2025,13(6):235. [43] ZHANG J,ZUO J. Efficient numerical framework for long-duration tread braking:Structured table approach for frictional heat-mechanical coupling[J]. International Journal of Heat and Mass Transfer,2026,256:128101. [44] BOSSO N,MAGELLI M,ZAMPIERI N. Simulation of wheel and rail profile wear:A review of numerical models[J]. Railway Engineering Science,2022,30(4):403-436. [45] QI Y,HE X,ZOU R,et al. The effect of wheel wear on rail rolling contact fatigue and curve negotiation performance on heavy haul lines[J]. Proceedings of the Institution of Mechanical Engineers,Part F:Journal of Rail and Rapid Transit,2026,240(5):628-642. [46] VERNERSSON T,LUNDÉN R. Wear of brake blocks for in-service conditions-influence of the level of modelling[J]. Wear,2014,314(1-2):125-131. [47] SPIRYAGIN M,WU Q,COLE C. International benchmarking of longitudinal train dynamics simulators:Benchmarking questions[J]. Vehicle System Dynamics,2017,55(4):450-463. [48] WU Q,SPIRYAGIN M,COLE C,et al. International benchmarking of longitudinal train dynamics simulators:Results[J]. Vehicle System Dynamics,2018,56(3):343-365. [49] ARCHARD J F. Contact and rubbing of flat surfaces[J]. Journal of Applied Physics,1953,24(8):981-988. [50] CHEN S,ZHAO G,WANG H,et al. Study of wheel wear influenced by tread temperature rising during tread braking[J]. Wear,2019,438:203046. [51] 董永刚,仪帅,黄鑫磊,等. 列车紧急制动过程中踏面温度分布及磨耗预测[J]. 中国机械工程,2021,32(4):431-438,445.DONG Yonggang,YI Shuai,HUANG Xinlei,et al. Temperature distribution of treads and wear prediction during train emergency braking[J]. China Mechanical Engineering,2021,32(4):431-438,445. [52] 朱爱华,张财胜,杨建伟,等. 不同制动工况下地铁车轮踏面磨耗研究[J]. 中国科技论文,2024,19(6):695-702,714.ZHU Aihua,ZHANG Caisheng,YANG Jianwei,et al. Research on tread wear of metro wheel under different braking conditions[J]. China Sciencepaper,2024,19(6):695-702,714. [53] BOSSO N,CANTONE L,FALCITELLI G,et al. Simulation of the thermo-mechanical behaviour of tread braked railway wheels by means of a 2D finite element model[J]. Tribology International,2023,178:108074. [54] SURESH BABU A,SIVA PRASAD N. Coupled field finite element analysis of railway block brakes[J]. Proceedings of the Institution of Mechanical Engineers,Part F:Journal of Rail and Rapid Transit,2009,223(4):345-352. [55] MICKOSKI H,MICKOSKI I,ZDRAVESKI F. Investigation of self-excited vibrations in tread brake unit for railway vehicles[J]. Journal of Vibroengineering,2016,18(6):3881-3890. [56] SOMÀ A,AIMAR M,ZAMPIERI N. Simulation of the thermal behavior of cast iron brake block during braking maneuvers[J]. Applied Sciences,2021,11(11):5010. [57] 张琪. 车轮踏面制动热负荷仿真分析[D]. 成都:西南交通大学,2016.ZHANG Qi. Simulation analysis of the wheel tread braking thermal load[D]. Chengdu:Southwest Jiaotong University,2016. [58] CHURCHILL S W,BERNSTEIN M. A correlating equation for forced convection from gases and liquids to a circular cylinder in crossflow[J]. Journal of Heat Transfer,1977,99(2):300-306. [59] CHURCHILL S W,USAGI R. A general expression for the correlation of rates of transfer and other phenomena[J]. AIChE Journal,1972,18(6):1121-1128. [60] SHPENEV A G. The influence of the thermoelastic instability on the wear of composite brake discs[J]. Journal of Friction and Wear,2021,42(1):30-37. [61] TIAN Y,TAN Z,LI H,et al. Tread evolution of bainitic heavy-haul freight wheels due to progressive heat accumulations from cyclic drag braking[J]. Engineering Failure Analysis,2025,171:109344. [62] SU J,DING H,WANG W,et al. Experimental study on the effect of brake shoe pressure on wheel wear and fatigue damage behavior during tread braking[J]. Wear,2025,571:205840.