Analysis of Carbon Fiber Hydraulic Cylinder under Combined Internal Pressure and Thermomechanical Load

doi:10.3901/JME.2025.08.308

Abstract

Abstract: Carbon fiber reinforced plastic(CFRP) hydraulic cylinders are used to replace metal cylinders in hydraulic system to reduce energy consumption and improve loading capacity in mobile equipment. The composites have anisotropy of the stress characteristics and the coefficient of thermal expansion, which causes the difference of stress and strain between adjacent different layers. A temperature distribution model and a thermal-mechanical model have been established. The stress and strain in the CFRP hydraulic cylinders under combined internal pressure and thermomechanical load are obtained using the model. The Tsai-Hill and Tsai-Wu failure criterion are used to evaluated the safety of the CFRP cylinder. The stress and strain of a CFRP hydraulic cylinder, have been analyzed using the temperature distribution model and the thermal-mechanical model. The result shows the safety factor is improved by the thermal stress in the cross section. And the inner diameter deformation of the hydraulic cylinder is reduced by the thermal load, and the deformation is within the sealing requirements. The thermal-mechanical analysis of the CFRP hydraulic cylinder can be used to guide the design of the CFRP hydraulic cylinder.

Key words: hydraulic cylinder, carbon fiber, thermal-mechanical coupling, anisotropy, temperature distribution, thermal stress

CLC Number:

TB332

YU Tian, LIU Zhicheng, LI Yao, WAN Xiaofei, JIAO Zongxia, SHANG Yaoxing. Analysis of Carbon Fiber Hydraulic Cylinder under Combined Internal Pressure and Thermomechanical Load[J]. Journal of Mechanical Engineering, 2025, 61(8): 308-318.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2025.08.308

http://www.cjmenet.com.cn/EN/Y2025/V61/I8/308

References

[1] 尚耀星，李瑶，于天，等. 轻量化复合材料液压缸现状及挑战[J]. 机械工程学报，2021，57(24)：13-38. SHANG Yaoxing，LI Yao，YU Tian，et al. Review and challenges of lightweight composite hydraulic cylinder[J]. Journal of Mechanical Engineering，2021，57(24)：13-38.
[2] 孔祥东，朱琦歆，姚静，等. 高端移动装备液压元件与系统轻量化发展综述[J]. 燕山大学学报，2020，44(3)：203-217. KONG Xiangdong，ZHU Qixin，YAO Jing，et al. Reviews of lightweight development of hydraulic components and systems for high level mobile equipment[J]. Journal of Yanshan University，2020，44(3)：203-217.
[3] 高凌云. 日本用碳纤维制造液压缸[J]. 液压工业，1988(1)：51. GAO Lingyun. Hydraulic cylinder made of carbon fiber in Japan[J]. Hydraulic Industry，1988(1)：51.
[4] HASHIMOTO H，TAMURA M，ICHIRYU K. Newly developed carbon fiber reinforced plastics(CFRP) hydraulic cylinder incorporated stroke sensor[J]. Proceedings of the JFPS International Symposium on Fluid Power，1989，1989(1)：525-531.
[5] 张婷婷. 汉臣液压新品介绍—据汉臣(上海)液压设备有限公司专家习青锋报告整理[J]. 液压气动与密封，2018，38(8)：94-98. ZHANG Tingting. Foreign hydraulic R & Dtrends-According to the expert report of Zhang Haiping，special consultant of expert committee of China hydraulicand pneumatic seal industry association[J]. Hydraulics Pneumatics ＆ Seals，2018，38(8)：94-98.
[6] Polygon PolySlide® composite pneumatic and hydraulic Cylinders[EB/OL]. [2022-12-06]. https://www.polygon composites.com/products/fluid-power.html.
[7] PARKER. Lightraulics actuators：High pressure hydraulics for lightweight applications[EB/OL]. [2022- 12-06]. https：//www.parker.com/literature/ Composite_ Cylinders_1410-UK.
[8] GUZ I A，MENSHYKOVA M，PAIK J K. Thick-walled composite tubes for offshore applications：An example of stress and failure analysis for filament-wound multi-layered pipes[J]. Ships and Offshore Structures，2017，12(3)：304-322.
[9] HULL D，LEGG M J，SPENCER B. Failure of glass/polyester filament wound pipe[J]. Composites，1978，9(1)：17-24.
[10] SPENCER B，HULL D. Effect of winding angle on the failure of filament wound pipe[J]. Composites，1978，9(4)：263-271.
[11] LI Yao，SHANG Yaoxing，WAN Xiaofei，et al. Design and experiment on light weight hydraulic cylinder made of carbon fiber reinforced polymer[J]. Composite Structures，2022，291：115564.
[12] XIA M，KEMMOCHI K，TAKAYANAGI H. Analysis of filament-wound fiber-reinforced sandwich pipe under combined internal pressure and thermomechanical loading[J]. Composite Structures，2001，51(3)：273-283.
[13] ANSARI R，ALISAFAEI F，GHAEDI P. Dynamic analysis of multi-layered filament-wound composite pipes subjected to cyclic internal pressure and cyclic temperature[J]. Composite Structures，2010，92(5)：1100-1109.
[14] CALHOGLU H，ERGUN E，DEMIRDAG O. Stress analysis of filament-Wound composite cylinders under combined internal pressure and thermal loading[J]. Advanced Composites Letters，2008，17(1)：13-21.
[15] 冯青，李敏，顾轶卓，等. 不同湿热条件下碳纤维/环氧复合材料湿热性能实验研究[J]. 复合材料学报，2010，27(6)：16-20. FENG Qing，LI Min，GU Yizhuo，et al. Experimental research on hygrothermal properties of carbon fiber/ epoxy resin composite under different hygrothermal conditions[J]. Acta Materiae Compositae Sinica，2010，27(6)：16-20.
[16] BAKAIYAN H，HOSSEINI H，AMERI E. Analysis of multi-layered filament-wound composite pipes under combined internal pressure and thermomechanical loading with thermal variations[J]. Composite Structures，2009，88(4)：532-541.
[17] YARIMPABUÇ D. Nonlinear thermal stress analysis of functionally graded thick cylinders and spheres[J]. Iranian Journal of Science and Technology，Transactions of Mechanical Engineering，2021，45(3)：655-663.
[18] ROBERTS D. The application of an induction motor thermal model to motor protection and other functions[D]. Liverpool：University of Liverpool，1989.
[19] MELLOR P H，ROBERTS D，TURNER D R. Lumped parameter thermal-model for electrical machines of tefc design[J]. IEE Proceedings-B Electric Power Applications，1991，138(5)：205-218.
[20] SOLAZZI L，BUFFOLI A. Fatigue design of hydraulic cylinder made of composite material[J]. Composite Structures，2021，277：114647.
[21] SOLAZZI L. Design and experimental tests on hydraulic actuator made of composite material[J]. Composite Structures，2020，232：111544.
[22] HERAKOVICH C T. Mechanics of fibrous composites[M]. New York：Wiley，1998.
[23] SHI Yuan，LI Shuguang，SITNIKOVA E，et al. Experimental evaluation and theoretical prediction of elastic properties and failure of C/C-SiC composite[J]. International Journal of Applied Ceramic Technology，2022，19(1)：7-21.
[24] LI Shuguang，SITNIKOVA E. A critical review on the rationality of popular failure criteria for composites[J]. Composites Communications，2018(8)：7-13.
[25] LI Shuguang. Failure criteria for composite materials—Back to basics[M]. Berlin：ResearchGate，2020.
[26] 应用Tsai-Wu准则以确定复合正交各向异性壳体的安全系数[EB/OL]. [2022-06-24]. https://help.solidworks. com/2013/chinese-simplified/SolidWorks/cworks/r_TsaiWu_Failure_Criterion.htm.
[27] 黄河，毛阳，孙永宾，等. YH-15航空液压油的黏温特性测试与分析[J]. 兵工自动化，2015，34(5)：42-43. HUANG He，MANG Yang，SUN Yongbin，et al. Test and analysis of YH-15 aviation hydraulic oilviscosity- temperature characteristics[J]. Ordnance Industry Automation，2015，34(5)：42-43.
[28] DABABNEH O，KIPOUROS T，WHIDBORNE J. Application of an efficient gradient-based optimization strategy for aircraft wing structures[J]. Aerospace，2018(5)：3.