Research on Visual Measurement Method of High Temperature H-beam Section Size

doi:10.3901/JME.2025.06.043

Abstract

Abstract: Aiming at the current measurement requirements of high temperature H-beam section size, a high temperature H-beam section size measurement system composed of multi-camera and linear laser sensors is designed and built. The system consists of four laser triangle model subsystems. The subsystems measure the size of the steel in the corresponding direction and splicing method is adopted to realize the measurement of the section size of the steel. Zhang’s calibration method and plane fitting method are used to calibrate the subsystem respectively, and the calibration accuracy is evaluated by the gauge block. The experimental results show that the accuracy can reach ±0.05 mm. Aiming at the problem of unevenness and disconnection of light stripe caused by oxide scale and other impurities on the surface of high temperature H-beam, a light stripe center extraction algorithm based on local regression analysis and quadratic fitting correction and a visual measurement method of H-beam section size based on analog caliper measurement are proposed. The experimental results show that the accuracy of high temperature H-beam measurement can reach ±0.5 mm, and the average processing time of each image is 0.24 s, which provides size data support for the closed-loop control in the production process of hot rolled H-beam.

Key words: high temperature H-beam, section size measurement, calibration accuracy evaluation, light stripe center extraction, visual measurement

CLC Number:

TP274

DU Wangzhe, CHEN Kanghui, LI Xuwei, LIU Yuanming, ZHENG Xianguang, ZHAO Xuexia, WANG Tao, WANG Zhihua. Research on Visual Measurement Method of High Temperature H-beam Section Size[J]. Journal of Mechanical Engineering, 2025, 61(6): 43-52.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2025.06.043

http://www.cjmenet.com.cn/EN/Y2025/V61/I6/43

References

[1] LIU X，CUI F，ZHAN X，et al. Seismic performance of bolted connection of H-beam to HSS-column with web end-plate[J]. Journal of Constructional Steel Research，2019，156：167-181.
[2] 付洁，刘彦生，张一舟，等. 热轧H型钢在民用建筑中推广应用瓶颈及对策分析[J]. 建筑结构，2021，51(24)：78-83. FU Jie，LIU Yansheng，ZHANG Yizhou，et al. Bottleneck and countermeasure analysis of popularization and application of hot rolled H-beam in civil buildings[J]. Building Structure，2021，51(24)：78-83.
[3] 石雷，张丽娜，肖克勇，等. 热轧H型钢翼缘斜度控制方法及措施[J]. 中国冶金，2021，31(4)：74-76. SHI Lei，ZHANG Lina，XIAO Keyong，et al. Control method and measure of flange inclination of hot-rolled H-beam steel[J]. China Metallurgy，2021，31(4)：74-76.
[4] 李志峰，何永全，曹光明，等. 热轧钢材氧化铁皮的高温形变机理研究[J]. 材料导报，2018，32(2)：259-262. LI Zhifeng，HE Yongquan，CAO Guangming，et al. Mechanism study of high-temperature deformation of oxide scale on hot-rolled steel[J]. Materials Reports，2018，32(2)：259-262.
[5] 李子良，王涛，张金柱，等. 宽厚板板形测量系统与标定方法研究[J]. 机械工程学报，2022，58(20)：294-303. LI Ziliang，WANG Tao，ZHANG Jinzhu，et al. Research on plate shape measurement system and calibration method of wide and thick plate[J]. Journal of Machanical Engineering，2022，58(20)：294-303.
[6] 邸红采，彭芳瑜，唐小卫，等. 机器人铣削加工误差视觉跟踪测量与补偿研究[J]. 机械工程学报，2022，58(14)：35-43. DI Hongcai，PENG Fangyu，TANG Xiaowei，et al. Research on vision tracking measurement and compensation of robot milling error[J]. Journal of Machanical Engineering，2022，58(14)：35-43.
[7] 马骙骙，杨新文，张昭，等. 基于结构光视觉的钢轨波磨检测与定位方法研究[J]. 机械工程学报，2022，58(22)：140-147. MA Kuikui，YANG Xinwen，ZHANG Zhao，et al. Research on detection and positioning method of rail courugation based on structural light vision[J]. Journal of Machanical Engineering，2022，58(22)：140-147.
[8] 邹焱飚，周卫林，王研博. 基于概率连续模型的激光视觉焊缝自动跟踪[J]. 机械工程学报，2017，53(10)：70-78. ZOU Yanbiao，ZHOU Weilin，WANG Yanbo. Laser vision seam automatic tracking based on probability continuous model[J]. Journal of Machanical Engineering，2017，53(10)：70-78.
[9] JIANG C，LI W，WU A，et al. A novel centerline extraction algorithm for a laser stripe applied for turbine blade inspection[J]. Measurement Science and Technology，2020，31(9)：095403.
[10] XU X，FEI Z，YANG J，et al. Line structured light calibration method and centerline extraction：A review[J]. Results in Physics，2020，19：103637.
[11] LIU Y，SONG J，YUAN W，et al. Sub-pixel center extraction method for line structured light stripe[J]. IOP Conference Series Materials Science and Engineering，2020，768：072045.
[12] 杨佳，贾书海. 一种新的三维轮廓测量方法[J]. 光子学报，2007，36(6)：972-975. YANG Jia，JIA Shuhai. A new method for 3D contour measurement[J]. Acta Photonica Sinica，2007，36(6)：972-975.
[13] ZHANG L，ZHANG Y，CHEN B. Improving the extracting precision of stripe center for structured light measurement[J]. Optik - International Journal for Light and Electron Optics，2020，207：163816.
[14] STEGER C. An unbiased detector of curvilinear structures[J]. IEEE Transactions on Pattern Analysis and Machine Intelligence，1998，20(2)：113-125.
[15] 蔡怀宇，冯召东，黄战华. 基于主成分分析的结构光条纹中心提取方法[J]. 中国激光，2015，42(3)：278-283. CAI Huaiyu，FENG Zhaodong，HUANG Zhanhua. Centerline extraction of structured light stripe based on principal component analysis[J]. Chinese Journal of Lasers，2015，42(3)：278-283.
[16] 刘天赐，刘桂华，胡莉，等. 基于法线引导的激光中心线提取方法[J]. 应用光学，2023，44(1)：211-218. LIU Tianci，LIU Guihua，HU Li，et al. Laser center-line extraction method based on normal guidance[J]. Journal of Applied Optics，2023，44(1)：211-218.
[17] 曹慧峰，朱均超，刘欣宜，等. 一种快速光栅条纹中心亚像素坐标提取方法[J]. 激光杂志，2021，42(3)：52-57. CAO Huifeng，ZHU Junchao，LIU Xinyi，et al. A method for extracting sub-pixel coordinates of grating fringe centre[J]. Laser Journal，2021，42(3)：52-57.
[18] WEN X，WANG J，ZHANG G，et al. Three-dimensional morphology and size measurement of high-temperature metal components based on machine vision technology：A review[J]. Multidisciplinary Digital Publishing Institute，2021，21(14)：4680.
[19] NAN Z，TAO W，ZHAO H. Development of a small-size laser triangulation displacement sensor and temperature drift compensation method[J]. Measurement Science and Technology，2021，32(9)：095107.
[20] 刘启海. 高温构件三维尺寸红外视觉测量的理论和实验研究[D]. 天津：天津大学，2012. LIU Qihai. Theoretical and experimental research on 3D size measurement of high-temperature components based on infrared vision[D]. Tianjin：Tianjin University，2012.
[21] ZHAO X，LIU J，ZHANG H，et al. Measuring the 3D shape of high temperature objects using blue sinusoidal structured light[J]. Measurement Science & Technology，2015，26(12)：125205.
[22] BRACUN D，SKULJ G，KADIS M. Spectral selective and difference imaging laser triangulation measurement system for on line measurement of large hot workpieces in precision open die forging[J]. The International Journal of Advanced Manufacturing Technology，2017，90(1-4)：917-926.
[23] 刘庆纲，樊志国，刘超，等. H型钢端面尺寸的精密视觉检测方法[J]. 光电工程，2013，40(11)：1-7. LIU Qinggang，FAN Zhiguo，LIU Chao，et al. Precision visual inspection method for the end face dimension of H-shaped steel[J]. Opto-Electronic Engineering，2013，40(11)：1-7.
[24] CAO G，GAO X，PAN S，et al. In-situ observation of cracking and healing behavior of high-carbon steel during oxide scale growth[J]. ISIJ International，2021，61(8)：2284-2291.