Design and Analysis of Single-drive Space Deployable Metamorphic Capture Manipulator

doi:10.3901/JME.2025.01.030

Abstract

Abstract: In order to improve the problems of large volume and complex driving of grasping mechanism in space non-cooperative target capture task, a single-drive space deployable truss capture manipulator is proposed. Based on the scissor mechanism and metamorphic principle, the structure of the deployable basic unit is designed, and the deployable unit is connected by the synchronous hinge to realize the synchronous drive of each deployable unit on the single-branch truss. The characteristics of changing the axis of the revolute joint at a specific position can be realized by using the metamorphic joint in the unit, so that the unfolding motion of the manipulator is transformed into the turning motion of the platform, and the capture action of the manipulator is completed. On the basis of considering the friction, the dynamic model of the basic deployable unit is established by using the Lagrange equation. The position, velocity and acceleration of each connecting rod are obtained by vector operation, and the relationship between the driving force and the equivalent torque is obtained. The single-branch manipulator truss is equivalent to a 4R mechanism, and the dynamic model of the manipulator truss combination is further carried out by Newton-Euler recursive method, and the correctness of the model is verified by software simulation. The proposed space capture manipulator has the advantages of expandable, metamorphic, and small number of drives, which can provide theoretical guidance and reference for the research of related technical fields.

Key words: manipulator, space capture, metamorphic mechanism, deployable mechanism, single-drive

CLC Number:

TH122

HAN Bo, YANG Ming, LUO Mingyan, LI Mingyang, YAO Jiantao, ZHAO Yongsheng. Design and Analysis of Single-drive Space Deployable Metamorphic Capture Manipulator[J]. Journal of Mechanical Engineering, 2025, 61(1): 30-43.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2025.01.030

http://www.cjmenet.com.cn/EN/Y2025/V61/I1/30

References

[1] 王文龙，杨建中. 航天器对接与捕获技术综述[J]. 机械工程学报，2021，57(20)：215-231. WANG Wenlong，YANG Jianzhong. Spacecraft docking & capture technology：Review[J]. Journal of Mechanical Engineering，2021，57(20)：215-231.
[2] 董楸煌，陈力. 双臂空间机器人捕获非合作目标冲击效应分析及闭链混合系统力/位形鲁棒镇定控制[J]. 机械工程学报，2015，51(9)：37-44. DONG Qiuhuang，CHEN Li. Impact effect analysis of dual-arm space robot capturing a non-cooperative target and force/position robust stabilization control for closed-chain hybird system[J]. Journal of Mechanical Engineering，2015，51(9)：37-44.
[3] SHAN M，GUO J，GILL E. Review and comparison of active space debris capturing and removal methods[J]. Progress in Aerospace Sciences，2016，80：18-32.
[4] 韦文书，荆武兴，高长生. 捕获非合作目标后航天器的自主稳定技术研究[J]. 航空学报，2013，34(7)：1520-1530. WEI Wenshu，JING Wuxing，GAO Changsheng. Research automatic stability technology of spacecraft assembly with captured non-cooperative targets on orbit[J]. Acta Aeronautica et Astronautica Sinica，2013，34(7)：1520-1530.
[5] 万文娅，孙冲，袁建平. 空间非合作目标多指包络抓捕路径设计[J]. 航空学报，2020，41(12)：280-292. WAN Wenya，SUN Chong，YUAN Jianping. Muti-finger caging-based grasping path design for space non- cooperative targets[J]. Acta Aeronautica et Astronautica Sinica，2020，41(12)：280-292.
[6] LI H，LIU Q，WU S，et al. Capturing dynamics of a space manipulator end-effector with snare capture and retract operations[J]. Aerospace Science and Technology，2023，136：108239.
[7] HAN B，XU Y，YAO J，et al. Type synthesis of deployable mechanisms for ring truss antenna based on constraint-synthesis method[J]. Chinese Journal of Aeronautics，2020，33(9)：2445-2460.
[8] WANG X，SHI L，KATUPITIYA J. A strategy to decelerate and capture a spinning object by a dual-arm space robot[J]. Aerospace Science and Technology，2021，113：106682.
[9] SREEKANTH N，DINESAN A，NAIR A R，et al. Design of robotic manipulator for space applications[J]. Materials Today：Proceedings，2021，46：4962-4970.
[10] 孟光，韩亮亮，张崇峰. 空间机器人研究进展及技术挑战[J]. 航空学报，2021，42(1)：8-32. MENG Guang，HAN Liangliang，ZHANG Chongfeng. Research progress and technical challenges of space robot[J]. Acta Aeronautica et Astronautica Sinica，2021，42(1)：8-32.
[11] 刘宏，蒋再男，刘业超. 空间机械臂技术发展综述[J]. 载人航天，2015，21(5)：435-443. LIU Hong，JIANG Zainan，LIU Yechao. Review of space manipulator technology[J]. Manned Spaceflight，2015，21(5)：435-443.
[12] HANDBERG R. Dancing with the pygmy elephant：The Canadian space program，future directions amid challenges[J]. Technology in Society，2017，51：209-214.
[13] FENG F，TANG L，XU J，et al. A review of the end-effector of large space manipulator with capabilities of misalignment tolerance and soft capture[J]. Science China-Technological Sciences，2016，59(11)：1621-1638.
[14] BOTTA E M，SHARF I，MISRA A K. Contact dynamics modeling and simulation of tether nets for space-debris capture[J]. Journal of Guidance Control and Dynamics，2017，40(1)：110-123.
[15] BOTTA E M，SHARF I，MISRA A K，et al. On the simulation of tether-nets for space debris capture with vortex dynamics[J]. Acta Astronautica，2016，123：91-102.
[16] 马骏，黄攀峰，孟中杰. 一种空间飞网机器人网型保持控制方法[J]. 飞行力学，2013，31(6)：561-565. MA Jun，HUANG Panfeng，MENG Zhongjie. A maintaining control method for maneuvering-net space robot[J]. Flight Dynamics，2013，31(6)：561-565.
[17] 孟中杰，黄攀峰. 自主机动飞网机器人动力学建模与网型保持方法[J]. 宇航学报，2015，36(7)：755-762. MENG Zhongjie，HUANG Panfeng. Dynamics modeling and shape keeping of the maneuverable net robot[J]. Journal of Astronautics，2015，36(7)：755-762.
[18] ZHAO Y，HUANG P，ZHANG F. Capture dynamics and net closing control for tethered space net robot[J]. Journal of Guidance Control and Dynamics，2019，42(1)：199-208.
[19] ZHAO Y，ZHANG F，HUANG P. Dynamic closing point determination for space debris capturing via tethered space net robot[J]. IEEE Transactions on Aerospace and Electronic Systems，2022，58(5)：4251-4260.
[20] HAN B，JIANG Y，YANG W，et al. Kinematics characteristics analysis of a 3-UPS/S parallel airborne stabilized platform[J]. Aerospace Science and Technology，2023，134：108163.
[21] 乔尚岭，刘荣强，郭宏伟，等. 3-DOF索杆桁架式欠驱动机械手运动控制[J]. 机械工程学报，2020，56(23)：78-88. QIAO Shangling，LIU Rongqiang，GUO Hongwei，et al. Motion control of 3-DOF under-actuated cable-truss robotic hand[J]. Journal of Mechanical Engineering，2020，56(23)：78-88.
[22] JIA G，LI B，HUANG H，et al. Design and analysis of an underactuated robotic hands for grasping space irregular- shaped non-cooperative objects[C]// Proceedings of the IEEE International Conference on Information and Automation (ICIA)，Macau，China，ICIA，2017：650-655.
[23] HAN B，YUAN Z，HU X，et al. Design and analysis of a hoop truss deployable antenna mechanism based on convex pentagon polyhedron unit[J]. Mechanism and Machine Theory，2023，186：105365.
[24] QI X，HUANG H，LI B，et al. A large ring deployable mechanism for space satellite antenna[J]. Aerospace Science and Technology，2016，58：498-510.
[25] ZHAO D，ZHAO J，YAN Z. Planar deployable linkage and its application in overconstrained lift mechanism[J]. Journal of Mechanisms and Robotics-Transactions of the ASME，2016，8(2) ：021022.
[26] 康熙，戴建生. 机构学中机构重构的理论难点与研究进展——变胞机构演变内涵、分岔机理、设计综合及其应用[J]. 中国机械工程，2020，31(1)：57-71. KANG Xi，DAI Jiansheng. Theoretical difficulties and research progresses of mechanism reconfiguration in mechanisms——Evolution connotation，furcation principle，design synthesis and application of metamorphic mechanisms[J]. China Mechanical Engineering，2020，31(1)：57-71.
[27] 李端玲，张忠海，戴建生，等. 变胞机构的研究综述与展望[J]. 机械工程学报，2010，46(13)：14-21. LI Duanling，ZHANG Zhonghai，DAI Jiansheng，et al. Overview and prospects of metamorphic mechanism[J]. Journal of Mechanical Engineering，2010，46(13)：14-21.
[28] 王圣捷，戴建生. 变胞四足机器人倾覆后的变胞恢复机理及其特性研究[J]. 中国机械工程，2021，32(11)：1274-1282. WANG Shengjie，DAI Jiansheng. Research on metamorphic self-recovery strategy and characteristics of metamorphic quadruped robots after overturning[J]. China Mechanical Engineering，2021，32(11)：1274-1282.
[29] 周杨，畅博彦，金国光，等. 面向变胞机构动力学建模的变拓扑构型数学描述方法[J]. 机械工程学报，2022，58(9)：49-61. ZHOU Yang，CHANG Boyan，JIN Guoguang，et al. Mathematic description method of variable topology configuration for dynamic modeling of metamorphic mechanism[J]. Journal of Mechanical Engineering，2022，58(9)：49-61.
[30] HAN B，YUAN Z，ZHANG J，et al. Design and analysis of modular deployable antenna mechanism based on a class of self-limiting position units[J]. Mechanism and Machine Theory，2024，191：105509.
[31] 贾璞，李端玲，李海源，等. 基于变胞铰链的并联机构结构设计与构型分析[J]. 机械工程学报，2020，56(19)：92-102. JIA Pu，LI Duanling，LI Haiyuan，et al. Structural design and configuration analysis of parallel mechanism with metamorphic joint[J]. Journal of Mechanical Engineering，2020，56(19)：92-102.
[32] 王冰，方跃法. 基于球面五杆机构的变胞并联机构构型综合[J]. 机械工程学报，2018，54(19)：18-26. WANG Bing，FANG Yuefa. Type synthesis of metamorphic parallel mechanism with spherical five bar linkage[J]. Journal of Mechanical Engineering，2018，54(19)：18-26.
[33] 徐坤，乔安伟，丁希仑. 剪叉弯曲折展变胞机构的设计与分析[J]. 机械工程学报，2020，56(5)：55-62. XU Kun，QIAO Anwei，DING Xilun. Design and analysis of a scissor-bending deployable and foldable mechanism[J]. Journal of Mechanical Engineering，2020，56(5)：55-62.
[34] HAN B，LI X，SUN J，et al. Design and dynamic analysis of a scissors hoop-rib truss deployable antenna mechanism[J]. Defence Technology，2023，24：399-413.
[35] 刘超，谭稀岑，姚燕安，等. 一种新型可变形轮腿式机器人的设计与分析[J]. 机械工程学报，2022，58(3)：65-74. LIU Chao，TAN Xicen，YAO Yanan，et al. Design and analysis of a novel deformable wheel-legged robot[J]. Journal of Mechanical Engineering，2022，58(3)：65-74.
[36] KUO C，SU J. Configuration analysis of a class of reconfigurable cube mechanisms：Mobility and configuration isomorphism[J]. Mechanism and Machine Theory，2017，107：369-383.
[37] WANG S，HUANG H，JIA G，et al. Design of a novel three-limb deployable mechanism with mobility bifurcation[J]. Mechanism and Machine Theory，2022，172：104789.
[38] HAN B，XU Y，YAO J，et al. Design and analysis of a scissors double-ring truss deployable mechanism for space antennas[J]. Aerospace Science and Technology，2019，93：105357.
[39] GAN D，DAI J，LIAO Q. Constraint analysis on mobility change of a novel metamorphic parallel mechanism[J]. Mechanism and Machine Theory，2010，45(12)：1864-1876.
[40] GAN D，DAI J，SENEVIRATNE L. Unified kinematics and optimal design of a 3rRPS metamorphic parallel mechanism with a reconfigurable revolute joint[J]. Mechanism and Machine Theory，2016，96：239-254.
[41] KUO C，SU J，WU L. An algebraic formulation for the configuration transformation of a class of reconfigurable cube mechanisms[J]. Mechanical Sciences，2017，8(1)：101-109.
[42] JIA G，HUANG H，LI B，et al. Synthesis of a novel type of metamorphic mechanism module for large scale deployable grasping manipulators[J]. Mechanism and Machine Theory，2018，128：544-559.
[43] TIAN H，MA H，MA K. Method for configuration synthesis of metamorphic mechanisms based on functional analyses[J]. Mechanism and Machine Theory，2018，123：27-39.
[44] LI G，XU P. Design and analysis of a deployable grasping mechanism for capturing non-cooperative space targets[J]. Aerospace Science and Technology，2020，106：106230.
[45] GAO C，KANG X，LEI H，et al. Design and analysis of a novel large-span two-fold deployable mechanism[J]. Mechanism and Machine Theory，2023，186：105352.