Material Removal Mechanism and Surface Quality Evaluation of Graphite Ultrasonic Vibration Milling

doi:10.3901/JME.2024.09.086

Abstract

Abstract: Surface fragmentation often occurs during the milling process of graphite mold. Ultrasonic vibration assisted machining can improve surface fragmentation and machining quality. However, currently, there is a lack of the research on the material removal mechanism and machining quality evaluation of ultrasonic vibration assisted milling of graphite materials have not been studied. Through ultrasonic vibration assisted milling experiments, the removal mechanism of graphite materials during ultrasonic vibration assisted milling and the influencing factors on the quality of machined surfaces are investigated.The effects of ultrasonic vibration assistance on cutting force, acoustic emission signal strength, chip and surface morphology characteristics are analyzed. And the influence of processing parameters on surface roughness is explored. The results indicate that the material removal mechanisms during graphite material milling can be divided into micro crushing removal and large scale crushing removal. Ultrasonic vibration assistance can improve the proportion of micro crushing removal mechanism, improve machining quality, and reduce cutting force by about 25% and acoustic emission signal strength. Through process parameter experiments, it is found that under ultrasonic vibration assisted milling conditions, reducing the radial cutting depth and feed rate per tooth can reduce surface roughness by more than twice. Choosing an appropriate ultrasonic amplitude can help suppress surface fragmentation and improve the quality of the processed surface, but increasing the cutting speed can weaken the effect of ultrasonic vibration, and excessive ultrasonic amplitude can also lead to poor surface quality. In summary, ultrasonic vibration assistance has a significant effect on suppressing surface fragmentation in graphite milling, providing guidance for further solving the problem of surface fragmentation in graphite machining.

Key words: ultrasonic vibration, milling, graphite material, removal mechanism, surface quality

CLC Number:

TG156

CHEN Shoufeng, WANG Chengyong, LI Weiqiu, DING Feng, LU Yaoan, ZHOU Yuhai. Material Removal Mechanism and Surface Quality Evaluation of Graphite Ultrasonic Vibration Milling[J]. Journal of Mechanical Engineering, 2024, 60(9): 86-96.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2024.09.086

http://www.cjmenet.com.cn/EN/Y2024/V60/I9/86

References

[1] ZEILMANN R P， ZANELLA C. PCD coating polishing effect on the tool wear in high-speed milling of graphite[J]. The International Journal of Advanced Manufacturing Technology，2020，108(7)：2579-93.
[2] XU Y C，CHEN K H，WANG S Q，et al. Performance of AlTiN- and diamond-coated carbide tools in dry high-speed milling of electro discharge machining graphite [J]. Proceedings of the Institution of Mechanical Engineers，Part B：Journal of Engineering Manufacture，2018，232(5)：766-775.
[3] 周玉海，王成勇. CIP石墨高速加工关键技术及应用研究进展[J]. 工具技术，2018，52(9)：3-9. ZHOU Yuhai，WANG Chengyong. Research progress on key technology and application of high-speed machining CIP graphite[J]. Tool Engineering，2018，52(9)：3-9.
[4] 周玉海，王成勇. 石墨加工表面粗糙度图像评定方法[J]. 工具技术，2020，54(8)：82-86. ZHOU Yuhai，WANG Chengyong. Image evaluation method of surface roughness based on graphite machining[J]. Tool Engineering，2020，54(8)：82-86.
[5] WANG C Y，ZHOU L ，FU H ，et al. High speed milling of graphite electrode with endmill of small diameter [J]. Chinese Journal of Mechanical Engineering，2007，20(4)：27-31.
[6] ZHOU Y H，WANG C Y，WANG Q M. Cutting performance of diamond coated，TiAlN coated and carbide cutting tools in high speed milling graphite[J]. Materials Science Forum，2014，800-801：451-459.
[7] HU Z L，WANG C Y，ZHOU L，et al. Cutting parameters optimization of high-speed milling of thin-walled graphite electrode[J]. Key Engineering Materials，2006，315-316：319-323.
[8] CICA D，SREDANOVIC B，MIJUKOVI G. Experimental investigation of tool deflection in micro-milling of fine-grained graphite[J]. The International Journal of Advanced Manufacturing Technology，2022，123(1)：161-168.
[9] SANCHEZ-LOPEZ O，HERNANDEZ-CASTILLO I，CASTANEDA-ROLDAN C-H，et al. Surface roughness modeling using response surface methodology and a variant of multiquadric radial basis function [J]. The International Journal of Advanced Manufacturing Technology，2020，110(11)：3311-22.
[10] 王明海，印文典，王奔，等. 切削参数对各向同性热解石墨切削力的影响[J]. 机械设计与制造，2016，4(8)：121-123，127. WANG Minghai，YIN Wendian，WANG Ben，et al. Influence of cutting parameters on cutting force of isotropy pyrolytic graphite[J]. Machinery Design＆Manufacture，2016，4(8)：121-123，127.
[11] MIJUŠKOVIĆ G，CICA D. Investigation，modeling，and optimization of surface roughness in micro-milling of graphite electrodes [J]. The International Journal of Advanced Manufacturing Technology，2021，117(1)：579-90.
[12] ZHOU L，WANG C Y，QIN Z. Investigation of chip formation characteristics in orthogonal cutting of graphite[J]. Materials and Manufacturing Processes，2009，24(12)：1365-1372.
[13] WANG M H，WANG H J，LIU Z H. Study on the cutting mechanism and the brittle ductile transition model of isotropic pyrolyric graphite[J]. Proceedings of SPIE - The International Society for Optical Engineering. 2010，228-229(7997)：1-6.
[14] WAN Z P，YANG D Y，LU L S，et al. Mechanism of material removal during orthogonal cutting of graphite/polymer composites [J]. The International Journal of Advanced Manufacturing Technology，2016，82(9-12)：1815-1821.
[15] ZHAO B，CHEN F，JIA X F，et al. Surface quality prediction model of nano-composite ceramics in ultrasonic vibration-assisted ELID mirror grinding[J]. Journal of Mechanical Science and Technology，2017，31(4)：1877-1884.
[16] SUN G Y，SHI F，ZHAO Q L，et al. Material removal behaviour in axial ultrasonic assisted scratching of Zerodur and ULE with a Vickers indenter [J]. Ceramics International，2020，46( 10)：14613-14624.
[17] YAN Y Y，ZHANG Y F，ZHAO B，et al. Surface formation and damage mechanisms of nano-ZrO₂ ceramics under axial ultrasonic-assisted grinding[J]. Journal of Mechanical Science and Technology，2021，35(3)：1187-1197.
[18] ZHANG J G，SUZUKI N，WANG Y L，et al. Fundamental investigation of ultra-precision ductile machining of tungsten carbide by applying elliptical vibration cutting with single crystal diamond [J]. Journal of Materials Processing Technology，2014，214(11)：2644-2659.
[19] CHEN J ，MING W W，AN Q L，et al. Mechanism and feasibility of ultrasonic-assisted milling to improve the machined surface quality of 2D Cf/SiC composites[J]. Ceramics International，2020，46(10)：15122-15136 [J]. Journal of Central South University，2018，25(2)：277-86.
[20] DAI C W，YIN Z ，WANG P ，et al. Analysis on ground surface in ultrasonic face grinding of silicon carbide (SiC) ceramic with minor vibration amplitude[J]. Ceramics International，2021，47(15)：21959-21968.
[21] CHEN J，WANG C H，LI H L. Experimental investigation of brittle material removal fraction on an optical glass surface during ultrasound-assisted grinding [J]. The International Journal of Advanced Manufacturing Technology，2016，86(1-4)：419-26.
[22] WANG J J，YANG Y，ZHU Z W，et al. On ductile-regime elliptical vibration cutting of silicon with identifying the lower bound of practicable nominal cutting velocity[J]. Journal of Materials Processing Technology，2020，283(116720)：1-22.
[23] 陈守峰. PCD整体微刃刀具超声辅助加工石墨切削性能研究[D]. 广州：广东工业大学，2021. CHEN Shoufeng. Cutting performance of PCD integral micro edge tool in ultrasonic assisted machining of graphite[D]. Guangzhou：Guangdong University of Technology，2021.
[24] 闫家超，金成哲. 基于声发射技术的微切削加工表面形貌监测[J]. 制造技术与机床，2011，4(3)：38-41. YAN Jiachao，JIN Chengzhe. Monitoring machined surface topography by micro cutting based on acoustic emission technology[J]. Manufacturing Technology & Machine Tool，2011，4(3)：38-41.
[25] 周兆锋，洪捐，黄传锦. 基于声发射信号分析的刀具磨损状态在线监测研究[J]. 工具技术，2022，56(12)：51-55. ZHOU Zhaofeng，HONG Juan，HUANG Chuanjin. Analysis of acoustic emission signal of cutting tool wear state based on acoustic emission technology[J]. Tool Engineering，2022，56(12)：51-55.
[26] SHEN K，HUANG Z H，HU K X，et al. Advantages of natural microcrystalline graphite filler over petroleum coke in isotropic graphite preparation[J]. Carbon，2015，90：197-206.
[27] 丁文锋，曹洋，赵彪，等. 超声振动辅助磨削加工技术及装备研究的现状与展望[J]. 机械工程学报，2022，58(9)：244-269. DING Wenfeng，CAO Yang，ZHAO Biao，et al. Research status and future prospects of ultrasonic vibration-assisted grinding technology and equipment[J]. Journal of Mechanical Engineering，2022，58(9)：244-269.
[28] ZHA H T，FENG P F，ZHANG J F，et al. Material removal mechanism in rotary ultrasonic machining of high-volume fraction SiCp/Al composites[J]. International Journal of Advanced Manufacturing Technology，2018，97(24)：1-11.
[29] ZHANG B，YIN J F. The ‘skin effect’ of subsurface damage distribution in materials subjected to high-speed machining [J]. International Journal of Extreme Manufacturing，2019，1(1)：126-137.
[30] 周玉海. 精密石墨模具切削加工机理与工艺研究[D]. 广州：广东工业大学，2018. ZHOU Yuhai. Research on machining mechanism and technology of precision graphite mould[D]. Guangzhou：Guangdong University of technology，2018.
[31] 丁凯，傅玉灿，苏宏华，等. 基于单颗磨粒磨削的超声振动参数与磨削参数匹配性研究[J]. 机械工程学报，2017，53(19)：59-65. DING Kai，FU Yucan，SU Honghua，et al. Study on matching performance of ultrasonic vibration and grinding parameters based on a single abrasive grinding[J]. Journal of Mechanical Engineering，2017，53(19)：59-65.
[32] WANG B，LIU Z Q，SONG Q H，et al. Investigations of critical cutting speed and ductile-to-brittle transition mechanism for workpiece material in ultra-high speed machining [J]. International Journal of Mechanical Sciences，2015，104：44-59.